Operating pressure: 0 bar - 8 bar
Flow: 0 l/min - 600 l/min
Fluid temperature: -25 °C - 100 °C
The FR1 series of hydarulic oil filters operate in a maximum working pressure of up to 8 bar. These oil filters can operate in ambient temperatures of -25°C to +100°C. ...
Operating pressure: 2 bar - 40 bar
Filtration size: 10 µm - 300 µm
Flow: 0 m³/h - 500 m³/h
The Scamatic Self-cleaning Filters is built with compliance to CADP or ASME directive requirements and in accordance to European Directive 97/23/EC (PED) norms. This product has a viscosity up to 300 cSt, a flowrate up ...
Operating pressure: 6 bar - 16 bar
Filtration size: 10 µm - 1,000 µm
Flow: 3 m³/h - 250 m³/h
... as a coarse and fine filter on the suction or on the pressure side. Filter operation is maintained without interruptions during the cleaning phase. The duplex filter is cast as one part ...
Operating pressure: 3,000 psi
Filtration size: 25, 10 µm
Flow: 24 m³/s - 100 m³/s
... Flow rates from 24 - 100 GPM: Choose the correct filter for your flow rate Industry standard elements: Easy to maintain Optional filter indicator gauge: Easy to tell when filter ...
Operating pressure: 0 bar - 12 bar
Flow: 2,500 l/min
... air and burnt oil from the compressor. All these impurities accompanied by compressed air reach the vital parts of tools causing oxidation and premature wear. For these reasons it is necessary to eliminate impurities ...
SAGOLA S.A.U.
Flow: 30 l/min - 8,333.333 l/min
... and reduce filter fabric consumption. Dirty coolant is conducted into the flat bed filter's coolant inlet and is distributed along the underlying filter ...
Flow: 150 l/min
... suction and filter cart that features a superior emulsion treatment for individually filled machines. This device is capable of a rapid change of emulsion and is usable for cutting oils. In addition, ...
MKR Metzger GmbH
Filtration size: 125 µm
Flow: 25 l/min - 400 l/min
The HOF HF series is an array of suction filters constructed in stainless-steel mesh grade 125µm reinforced with metal mesh and engineering resin for both ends. These filters protect system components ...
Operating pressure: 3 bar
Filtration size: 100 µm - 3,000 µm
Flow: 10 m³/h - 101,940.648 m³/h
YL series hand filter, constructed of 304 stainless steel wire brush and stainless steel key link components. The parts through the filter cover, brush device installed in a stainless steel within the ...
Operating pressure: 1 MPa
Fluid temperature: 0 °C - 80 °C
... flow velocity to produce steady flow, which can protect the pump and prevent cavitation. Applicable medium: clean water, oil products
A Ceramic vacuum disc filter is designed to separate liquids from solids for dewatering purposes. The device consists of a rotator, distributor, agitator, scraper, slurry tank, reducer of the main shaft, vacuum pump, ...
lianyungang boyun machinery.com
Filtration size: 0.01 µm - 5 µm
Flow: 25 m³/h - 2,200 m³/h
Compressed air which produce by compressors contain varying amounts of oil, water and hydrocarbon. Before starting to use compressed air must be filtered correctly according to process requirement. Also machinery and ...
Flow: 50, 100, 250 ft³/min
Oil Water Separators The CHWS range of oil-water separators is made of three models that cover 50, 100 and 250 cfm. All three models are simple to install, require a minimal amount of space and provide ...
Filtration size: 0 µm - 5 µm
... systems designed to filter oil. The system is suitable for the treatment of oils: Water-free oil (CUBO with cellulose filtering elements) With the ...
Flow: 0 l/h - 1,200 l/h
... essences, cosmetics, herbalist products, sweet and dry liqueurs. The models equipped with pump are fitted with a stainless steel electric pump with rubber impeller. On demand can be equipped with olive oil ...
F.lli Marchisio & C. s.p.a.
Operating pressure: 0.5 bar - 10 bar
Filtration size: 0.01 µm
Flow: 30 m³/h - 90 m³/h
• Oil removal filter with coalescing filter element • Available in 2 sizes with connections from 3/8” to 1” • Particle removal up to 0,01 µm • Oil residual 0,01 ppm • ...
Filtration size: 10 µm
Breather filters GN 882 are used when the air exchange is to be allowed between the inside of the container and the ambient air. The filter function is marked by a blue colour ring. The filter ...
Filtration size: 40 µm - 170 µm
Flow: 2.5 us gal/min - 12.9 us gal/min
Fluid temperature: 80 °F
Insert style safety screens feature an integral locking end that uses our field-proven insert principle of controlled expansion during installation to lock and retain the screen in place. A pre-installed expander pin is simply pressed ...
Operating pressure: 0 MPa - 24 MPa
Filtration size: 40 µm - 300 µm
Flow: 0.1 l/min - 100 l/min
Cartridge-style safety screens are designed to slip into a drilled flat-bottom hole and be retained by a secondary means. The Lee Company offers a separate retainer for the 5.5 mm and 8.0 mm sizes. These screens are constructed of all ...
Filtration size: 4 µm - 170 µm
Flow: 1 l/min - 92.364 l/min
Fluid temperature: 80 °F
Press-in style safety screens are specifically designed for easy installation into plastic housings and fittings and use our unique barbed design that provides easy press-in installation while ensuring retention. These components are ...
Operating pressure: 16, 17 bar
Filtration size: 1 µm
Flow: 0.5 m³/min - 200 m³/min
... various requirements, CompAir filters are available in three different grades: Innovative features mean outstanding performance without compromise. With differential pressure that starts low and stays low, these filters ...
Operating pressure: 18 bar
Filtration size: 0.01 µm
Flow: 118 m³/h
The DeVilbiss FinishLine range of air filter regulators and coalescers are manufactured to ensure optimum air flow and precision control. Units Available: FLRC-1 – Filtration down to 0.01 microns, suitable for air ...
Operating pressure: 18 bar
Filtration size: 0.01 µm
... range of air filter regulators and coalescers are manufactured to ensure optimum air flow and precision control. FLRCAC-1 – Filtration down to 0.01 microns plus activated carbon filter removing contaminants ...
Operating pressure: 232 psi
Filtration size: 40, 5 µm
Fluid temperature: -40 °C - 140 °C
... lightweight particulate filter that delivers high moisture removal in a compact package. The P3XF is used for the removal of solid particle contaminants down to 5 & 40 micron and the separation of bulk liquids. This type ...
Parker Electronic Controls Division
Operating pressure: 0 bar - 350 bar
Filtration size: 10 µm
Flow: 15 l/min
... -pressure filters F9.500 High-pressure filters High-pressure filters made of stainless steel and steel max. operating pressure 350 and 500 bar Version with rectifier function filter ...
Römheld GmbH Friedrichshütte
Operating pressure: 0 bar - 350 bar
Filtration size: 10 µm
Flow: 50 l/min
... High-pressure filters F9.500 High-pressure filters High-pressure filters made of stainless steel and steel max. operating pressure 350 and 500 bar Version for high flow rates filter ...
Römheld GmbH Friedrichshütte
Operating pressure: 0 bar - 350 bar
Filtration size: 10 µm
Flow: 3 l/min
... High-pressure filters F9.500 High-pressure filters High-pressure filters made of stainless steel and steel max. operating pressure 350 and 500 bar Plug-in filter, ...
Römheld GmbH Friedrichshütte
Operating pressure: 50 bar
Fluid temperature: -36 °C
Standard version • dry filter (water absorption capacity: 175 g at a dew point of -36 °C) • particle filter 1 μm • DILO couplings DN20 • safety valve (pe 50 bar) • gauge NG63 Description For ...
Operating pressure: 25 bar
3 dry filters (filled with molecular sieve and aluminium oxide AI2O3 combined with a particle filter; water absorption capacity: 175 g at a dew point of -36 °C) 2 DILO DN20 ...
Operating pressure: 16 bar
Flow: 0.83 m³/min - 1.83 m³/min
... innovative three-stage filters are a unique combination of three high-performance filters in one housing. The combined submicrofilters, activated charcoal absorbers and high-performance particle filters ...
Please specify:
Help us improve:
remaining