|
|
particularly attractive price/perforamnce ratio
boltless assembly
stepped beams are height adjustable in 25 mm increments
chipboard/steel panels are flush with the upper edge of the stepped beams
uprights are available with galvanised or epoxy-coated finish (colours: blue RAL 5010, red RAL 3000 or grey RAL 7035) |
|
The Sall ecological containers are used for handling, depositing, transferring and storing substances that are harmful for water beds in complete safety without compromising the equilibrium of the environmental system. Besides systems built in steel, the comprehensive range also includes different types in polyethylene for handling corrosive liquids.
|
|
Use
storage of and filling from drums
Design
retention basin with supporting feet and carrying beams for drum pallets
2 or 4 x 200 litre drums in a horizontal position
clip-on building kit system
low transport volume
|
|
Industrial Clutch Parts manufacture a variety of industrial clutches, brakes, couplings & rotary unions for the global power transmission markets. Product line covers applications in industries such as: oil & gas, marine, pulp & paper, metalworking, mining, & textiles. Directly replaces Eaton Airflex®, Croft®, Renold®s, Fawick® etc.
|
|
Simple to be intalled and compact; the Airing radial units are engaged by an air tube and can be used as drum brakes (in stopping and holding applications) or clutches (to connect two shafts directly or through a pulley).
Maximum torque from 40 to 4 000 Nm.
The high thickness friction pad and the reliable air tube ensure high performances and low maintenance cost. |
|
The DC and DCV constricting drum clutches and brakes are found all throughout industry in general power transmission duties.
Constructed using an integral rim and tube actuator, the DC has low inertia and high misalignment capacity, offering a simple solution to less arduous clutch and brake requirements.
A full range of options is available: Dual flanges for back to back mounting giving double torque capacity. Multiple air inlets for increased response speed. Split construction to avoid removal of the shafts on in-line drives. And wether you require just the friction shoe or mounting pins, or a complete actuator and rim assembly, all are backed by the Wichita name for service and reliability
|
|
... see all the products in the category
Clutches
|
| Drum clamps are widely used in the petroleum and chemical industries and in other applications that require the handling of standard 55-gallon drums. Drum clamps can also help improve productivity by handling up to four drums per load. |
|
| Cascade's Wine Barrel Handler simplifies the barrel handling process. Designed to work in the "cave" or "narrow aisle" operations, the Wine Barrel Handler allows a lift truck driver to easily grab a barrel from a stack, lower it to the ground or move it to the desired location. A 180-degree swinging fork assembly mounted on a full-width traversing frame allows the driver to pick up a barrel from either the left- or the right-hand side of a narrow aisle. The Wine Barrel Handler can handle most types and sizes of wine barrels. Also included in the fork cradle design are rollers to aide in the manual spinning of the barrel for mixing. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
|
... see all the products in the category
Winches
|
| ... products without technical information |
| |
| ... products without technical information |
| |
ALLGAIER drum driers are used particularly in the minerals industry, for drying pourable and abrasive wet materials.
Their main features are high throughput rates and the ability to process solid materials with widely differing granulometric properties.
The drum driers are available in single-shell, double-shell and triple-shell versions. The design ensures high performance in a small space. Special versions also permit the use of combined processes. |
|
| ... products without technical information |
| |
The Spring is a self-cleaning drum filter complete with a fixed filtering net, for the elimination of magnetic and amagnetic particles from both neat and soluble coolant liquids.
The Spring Range comprises of 6 models capable of purifying from 20 – 300 l/min of neat oil and from 50 – 90 l/min of emulsions.
The filtration efficiency of the drum can be customised according to the customers requirements.
The self-cleaning filters in the Spring Range can be used together with a wide variety of machine tools such as machining centres, deep hole drilling, transfer, grinding and milling machines, machining with special tools requiring high-pressure coolant. The Spring range is particularly ideal for work that involves the removal of metal fines produced using machine tools, abrasives and washing. It is therefore flexible and meets a wide variety of the demands posed by both the engineering and the automotive industries.
|
|
Considerable quantities of metal chips are produced in the automated factories of transformation of
metals. The productivity of the factory can be improved in an important way thanks to a continuous system of removal and
of treatment of the chips, because the operator does not waste any more his time to get rid of the chips but it produces.
An economic system of removal of the chips and treatment of cutting fluids requires however
solutions to measure.
The chips are collected and convoyed out of the production zone thanks to especially studied conveyers.
The long chips or in ball are reduced by crushing in a regular flow of short pieces. Wet chips
are dried and cutting fluids are recycled and cleaned. The process must be continuous and asks only one work
minimum handbook.
The effective and economic solution for the treatment of the chips varies according to the company, according to the provision
workshop, volume and characteristics of the chips.
Sermeto & Arboga-Darenth have the experiment and know-how to bring the most economic solution,
adapted to your Company, either thanks to our standard equipment, or thanks to our integrated systems of treatment of the chips.
|
|
Drum crusher
Orwak 2500 DC is a drum crusher that can crush up to 60 drums per hour with any drained liquid collected for disposal.
Orwak 3210 DC is a combined baler and drum press that collects any residual drained liquid for disposal. |
|
Air-Operated Can Press for pressing cans of up to 30 litres:
• No Oil
• No electrical parts
• Safe & easy to use
• Easy to clean
• Takes up very little space |
|
| ... products without technical information |
| |
| The DISACOOL Cooling Drum shakes out the mould and cools the castings. Furthermore the cooling drum breaks up the sand lumps, cools the sand, and then screens it, ready for recycling. |
|
Low level infeed/outfeed palletisers/depalletisers for filled cans are particularly suitable when speeds are medium or fast.
A flow palletisation/depalletisation type is adopted. |
|
| PneumaticScaleAngelus is the leading supplier of Can Seamers and Can Closing machines. We have authorized agents worldwide, with facilities in the United States, Belgium and England. We are a recognized leader in the design, production and maintenance of high speed can seaming equipment. Our machines are used by leading Food, Beverage, Non-Food and Can Manufacturing facilities around the world. |
|
Sifter G 308
The smallest centrifugal sifter.
Capacity up to 500 kg/h at screen size 900 µ.
G 308 sifter is a compact designed and light weighted Centrifugal Sifter for a capacity range up to 500 kg/h with a 900 µ screen.
The G 308 sifter has been especially designed for applications where space is limited. Used prior to packing head, paint spraying and for particle classification. |
|
In the delivery state (clamping ring barrel) the material is prepared and conditioned for use and transfer to the spray gun. Due to the pneumatic lid lifter, an empty barrel can be replaced easily with a full one. System components:
- Lid for attaching apparatus
- Pneumatic lid lifting device
- Agitator (electric or pneumatic powered)
- Pump with material filter
- Agitator switch off when lid is lifted pneumatically
- Compressed air fittings
All agitators are tested and certified in accordance with ATEX 94/9/EC. Versions without explosion protection are also available.
10 years of delivery guarantee for spare parts |
|
| ... products without technical information |
| |
|
|
see the results for the following category