|
|
The Mink Prisma-System - gentle transport and support for shafts and pipes with delicate surfaces
The Mink Prisma-System for carrying, gliding and transporting is ready for assembly and offers an optimal and integral solution for support of vulnerable goods.
Available in two sizes, for applications with a component diameter of 0 - 60 mm and 0 - 140 mm. Due to the quickness of replacing the brush segments the Mink Prisma-System can easily be changed over for different requirements or components, without using tools.
Advantages:
- Significant cost savings thanks to standardisation
- No damage by chips or splinters
- Perfect quality assurance
- Quick availability
- Easy conveyance of products
|
|
Landis Reamer Program
Landis Reamers for reaming, chamfering, and facing come in four basic styles - solid, detachable blade, insert blade and composite. The style supplied will depend upon the operation to be performed and the type of Landis die head in which it will be used. They can be identified by a symbol number stamped or etched on one of the flutes of the solid and composite reamers and on each one of the blades of detachable and insert blade-type reamers.
|
|
Linchpins for pipes (bichromate galvanized steel)
Linchpins (galvanized & stainless steel AISI 316L)
Safety linchpins (bichromate galvanized steel)
use in industrial supplies, DIY, entertainment industry, agriculture
|
|
The Dräger-Tube system is an established method for measuring and detecting contaminants in the soil, water and air. The Dräger-Tube method of measurement is used for investigating soil pollution, for investigating liquid samples, and for air analysis.
More than 500 substances can be detected and measured using the Dräger-Tube system. Typical applications include the monitoring of workplace air, emission measurements, quality control, process control and monitoring of compressed air for breathing apparatus, as well as environmental and hazardous substance detection applications.
|
|
This range of compact, modular, dc to dc power supplies is recommended where cost and space restrictions are important. The range has been designed with the needs of instrument manufacturers in mind.
Provision is made in the PS2001 and the PS3000 for continuous monitoring of output voltage and current.
A coaxial high voltage power lead, type RG174, is used in the PS2001 and PS3000. The lead can be fitted with a connector to your required specifications.
features :
- output voltage range up to 3000 V
- positive and negative versions available
- choice of 5, 12 or 24V input, depending on product
- internally or externally programmable
- excellent line load regulation
- input and output protection
- output voltage and current monitoring
- customised lead/connector option
- low ripple and fully screened
|
|
Landis Taps Program
Landis offers both collapsible and solid adjustable taps with replaceable chasers. These two systems offer a low-cost solution to internal threading operations.
|
|
The capped tube pulley design is used in applications with pulley face widths in excess of 6 inches. Two end caps are welded to tube stock of proper diameter, surface finish, and hardness. They are usually fixed to a shaft via QD bushings attached to the end caps via a bolt hole diameter.
|
|
... see all the products in the category
Pulleys
|
|
These breathing-air hoses are unique in the market; they are antistatic and feature a hytrel inner lining to prevent microbiological growth. Manufactured from PVC these hoses are virtually odour free and have been designed to EN14593 and EN14594. The hoses are, however, available at prices competitive with other hoses on the market which have less features.
|
|
To provide rapid and reliable identification of 2D bar coded
tubes - Micronic offers a unique range of high performance
tube readers and scanners. Designed to simply interface
with your sample storage system, Micronic tube readers
and scanners deliver industry leading operational precision,
high-throughput and long-term reliability. Each Micronic
tube reader and scanner comes with specially developed
software facilitating intuitive and precise tube code readin.
Multi Tube Scanners
The Micronic Multi Tube Scanner is the ideal solution for
manually reading racks of 2D bar coded tubes. The Multi
tube scanner is an easy-to-use and reliable bench-top
system that delivers high quality for a low investment.
The Multi tube scanner is available configured to read
single racks or as a rapid four rack scanner. The versatile
software will generate
• Reads 96 tubes in less than 10 seconds.
• Simple installation via a USB connection to your PC.
• User friendly and highly reliable.
• Versatile intuitive software for data export.
|
|
WATER-OIL HEAT EXCHANGERS WITH TUBE BUNDLE:
They consist of small diameter smooth tubes; this allows the best compromise between high thermic yield and low pressure loss. For a good exchanger practices some oil rates are indicated in the tables. Going down to the lowest rate of flow, indicated in the tables, the low oil speed causes a great loss in yield, whereas a rate of flow which is superior to the maximum indicated, causes great pressure loss and does not considerably increase the thermal yield. The yield diagrams indicate the heat quantity each exchanger can disperse according to the difference between oil and water mean temperatures.
|
|
The SIGMA PRO are electrical workshop band saw machines for plastic
pipes.
The SIGMA PRO were specially designed to perform easy cuts with a
wide range of inclinations (up to 67,5°), therefore becoming the ideal
right-hand device to use with the ALFA fittings machines for the
construction of special fittings (bends, wyes, tees and crosses), by
joining pipe segments.
|
|
measuring tube inside diameter: 9.7 mm; 18.2 mm; 25 mm; 32 mm; 40 mm; 50 mm ...
alternative forms of connection depending on inside diameter of measuring tube:
tube fittings; cutting ring fittings; flange connection;
flat tube ends; internal screw thread for connecting nipples
alternatively with / without input / output section
initial smallest measurable flow rate dependent on type of vane wheel: in gases from 0.08 m³/h,
in liquids 0.007 m³/h
terminal flow rate dependent on type of vane wheel: in gases 20 m/s; 40 m/s; 80 m/s;120 m/s;
in liquids: 3 m/s; 7.5 m/s; 10 m/s
working temperature range: -20° C... 100 °C; -20 °C... 240 °C and above
maximum working pressure: up to 25 bar above atmospheric
materials: stainless steel; PVDF; aluminium ...
explosion-proof type of protection: Category 1G and 1D Zone 0 and Zone 20; Category 2G and 2D Zone 1 and Zone 21
special designs on request
|
|
PRECISION MEASUREMENT & CONTROL SYSTEMS - PIPES & TUBES INDUSTRY
Beta LaserMike offers a complete line of process control instrumentation for the manufacture of products such as tube and pipe extrusions. Our systems offer varying levels of capability, utilize different measurement techniques, meet the needs of both on-line and off-line applications, and can be customized to fulfill your specific requirements.
* ID/OD/Wall Measurement
* Tolerance Checking
* Process Control
* SQC Graphical Interface
* Concentricity Measurement
* Weight & Throughput Measurement
* Non-contact Length and Speed Measurement
|
|
VCC's LPC Series 4mm Litepipe® is designed for use with both vertical and horizontal surface mount LEDs where the Litepipe® is attached directly to the display panel. Combining the physical attachment advantage with the fact that the Litepipe® is available in eighty-one lengths, the designer now has complete freedom in the positioning of the circuit board within the chassis. These features allow for easy board insertion in final assembly or removal for inspection and repair.
The display lens design of the Litepipe® is low-profile with Fresnel rings. The Litepipe® lens will disperse the light up to 160°. The light receiving end of the Litepipe® has a concave surface designed to be positioned in front of the horizontal surface mounted LED or directly over the top of the vertical surface mounted LED. This concave surface maximizes the gathering of the LED light output, increasing the efficiency of the Litepipe® display. The Litepipe® mixes and blends the LED multi-colors into a single color as the light passes through the uniquely designed Litepipe® surfaces.
|
|
The application of Induction heating technology in the sector of pipe coating is now a consolidated practice. In fact, the coating’s polymerization process is guaranteed by optimal thermal conditions.
Induction’s experience is confirmed by the fact that we supply the largest companies of the sector in production plants all over the world.
Given the peculiarity of the application, Induction is specialized in supporting the Customer with extremely compact and flexible solutions for all production needs, and with innovative automatic temperature control for respecting process specifications.
The quality of the inductors assures for the supply, which is more subject to wear, a ten-year long duration, while fully respecting system performance.
Thanks to its experience in the piping sector, Induction is able to propose systems for loading, unloading and transporting pipes even of considerable thicknesses.
Due to the particular environmental conditions in which the coating systems are often installed, Induction offers quick and on-time service for any specific Customer request.
|
|
High volume tests of automotive hose assemblies etc. Pressure test, leak test, flow test, volume expansion test, high pressure cleaning and dry blowing in the same cycle.
We have long experience in pressure testing, leak testing and cleanliness. Here the expression “weakest link in the chain” is really valid. When you wash a tube it’s very important that you get the pressure drop in the test object and not in the machine. We have developed a system of sandwich valves, pressure transformers, etc which we need in the system. We are practically the only ones in the market who use servo hydraulics to generate the test pressure. It costs more than pneumatic intensifiers but the advantages are significant.
|
|
This universal-kind of electrofusion machine is suitable for welding low voltage Polyethylene (PE) couplers (from 8 to 48 Volts) for high pressure conduits.
The POLYWELD machine is made in compliance with the current European standards and directives.
|
|
The New Easy Tube Loading Pump from Autoclude has been designed specifically for applications where the loading of the tubing into the pumphead needs to be effected quickly and simply without the use of any tools.
A major feature of the new pump design is its ability to have additional heads stacked onto a single drive unit enabling multi-channel pumping from a single drive.
The pumphead will accept 6 tube sizes from 0.8mm bore through to 8.0mm bore and will accept 5 different tube materials to meet the chemical compatibility demands of today. Flow rates up to 1260ml/min can be achieved dependent upon tube size and motor choice.
Each pumphead has as standard a 3 roller rotor mounted on its own stainless steel drive shaft which is supported by two ball race bearings to minimise the side load on the drive motor so extending the life of that unit.
The pumps can be supplied with a.c and d.c motors to suit a range of voltages or as pump head only for mounting on customers own drive.
The New Easy Tube Loading pumphead will suit applications in brewing, chemical, food and beverage industries, as well as laboratory, research and analysis applications all of which will benefit from this stylish new design.
|
|
Detector tubes are the simplest solution if you frequently need to measure many different substances. You can store detector tubes for a long time without service if you need to measure many different substances only occasionally. The handling of detector tubes is very simple.
|
|
STRONG POINTS
Ease of use: complete setup of units at a touch of the touch screen PC
Quick setup and automatic positioning of units: the high level of automation means it takes much less time to adapt the machine when the product being made is changed
Optimized cutting process: patented AVTC® (constant chip volume removal) system to provide a constant mean volume of chip removal under all operating conditions.
Connection with LAN (Local Area Network) and WAN (Wide Area Network)
Self-diagnostics with built-in graphics
User info, maintenance data and functional diagrams viewable on PC
Option of installing SPC (Statistical Process Control) and messenger (email/SMS) systems in case of machine alarm, as well as remote servicing with web cam.
|
|
|