|
|
Pressed segments with small radius for bulk good handling and pressed bends (with good flow characteristics) with a radius twice as large as diameter (up to 400 mm) for exhaust air/dust extraction plants.
Mass production, all products of the same quality, subsequent components identical. |
|
OK PIPES
The Kongskilde OK Pipe Systems are ideal for pneumatic and mechanical conveying. The simple and flexible pipe systems may be adjusted to suit any specific purpose, resulting in shorter conveying distances and, therefore, the most efficient and economical solutions. The OK Pipe System is available in three different diameters: OK 100, OK 160, OK 200 with diameters of 100, 160 and 200 mm, respectively. The dimensions refer to outside pipe diameters.
The OK Pipe System's modular design comprises pipes, bends, branches, diverters, cyclones, outlets, etc. The components are assembled quickly and easily using the unique OK quick release couplings. The wide range of OK piping and accessories ensures flexibility and ease of installation in existing buildings.
|
|
The range in PVDF comprises a complete series of pipes, fittings for heat socket fusion, manual and automatic valves for use in the construction of process lines and service lines to convey industrial fluids in the operating temperature range from - 40°C to 140°C.
The entire range is produced in SOLEF™ resins by SOLVAY S.A. classified according to ASTM D 3222 and compliant with requirements stated in ISO/WD 10931 for the use of PVDF pipeline systems in industrial processes. |
|
We are a worldwide market leader for piping systems and components in plastic and complementary materials. The application-oriented system solutions and superior quality components are used for industrial applications, gas and water distribution, and building technology.
PVC-U
PVC-C
ABS
â-PP-H
PP-R
PE 100
PVDF
Pre-Insulated Fittings
Double Containment
Multilayer Fittings
PB
|
|
Non-plasticized polyvinyl chloride (PVC -U) pipes for draining rainwater are without doubt the best compromise between technical characteristics and low cost. Their specific use is extremely indicated thanks to their particularly smooth walls. The complete range, their lightness, their ease of installation and connection by means of sockets and connection fittings also make Faraplan pipes ideal for ventilation.
Production range: Ø 63 - 630 mm |
|
OLMARK can boast years of experience in designing and manufacturing bended, assembled and flanged rigid pipes (in steel, stainless steel or copper) available in all possible dimensions and shapes required by clients’ technical specifications.
OLMARK’s pipes come, on request, with a CAD-3D drawing and they are all successfully tested in compliance with the most rigid international standardization directives.
With an outside rigid pipe diameter manufacture capacity that can spread from 4 to more than 300 mm, the range of personalised pipes designed by OLMARK is the natural choice of important OEMs, whose success depends on high working pressures control.
|
|
* EUCADRAIN-PE :
Pipes made of HD-PE for area drainage
following DIN 4262-1, type R2
* DRAINFLEX :
Pipes made of PVC for agriculture and house-building |
|
NEW and INEXPENSIVE: Steel Tube with Stainless Steel Look
Pickhardt & Gerlach GmbH & Co KG (www.Pickhardt-Gerlach.de) has presented a product innovation on this year’s international furniture exhibition ZOW in Germany:
Steel tube with the same characteristics as a stainless steel tube in terms of look and outer corrosion protection – while offering a hefty price advantage at the same time.
The advantages:
- Identical appearance as stainless steel, no perciveable difference
- Low-maintenance surface, even better than stainless steel
- Full outer corrosion protection
- Cheaper than stainless steel
If you require further information please contact:
Pickhardt & Gerlach GmbH & Co KG
Ansprechpartner: Hendrik Knoop
Tel 02375 91 83 0
Hendrik.knoop@pgmail.de |
|
PVC coated precision steel tubes in diamters between 5 and 40mm. Different material strenghts available.
Available in various colours, including metallic colours such as stainless steel and aluminium.
Lenghts up to 6000mm |
|
| Autoclave Engineers offers Seamless High Pressure Heavy Wall stainless steel tubing for pressures above 10,000 psi (690 bar) up to over 150,000 psi (10,000 bar). Also available in specialty materials such as Inconel, Duplex, Super Duplex, and others. A complete line of Valves, and Fittings are also available. |
|
Top Line Electropolished tubing sets the standard for service in applications requiring finishes to 15RA maximum. Available in sizes from 1/2" to 4" OD, this full finished stainless steel tubing is available from stock or direct from the mill in 20 foot lengths. All electropolished tubing is fully tested and marked per ASTM A450 requirements. 3
All Top line electropolished tubing is packaged using protective 6 mil poly sleeving with air tight end caps. The tubing is then packageg in wood or Tri-Wall corrugated cartons for maximum protection during shipment.
Finish: Electropolished Tubing is standard with a 15RA max ID with bright annealed/mill OD (ASME BPE surface finish code SFT4). Mechanically polished OD to 32RA or 20RA available on application. The same product is available with a 10RA max. surface finish ID.
Annealing: All tubing is Bright Annealed to a minimum of 1900 degrees F (1040° C) and rapidly quenched.
Cleaning: All Top Line electropolished tubing is rinsed with low TOC de-ionized water. The tubing is then dry purged with 99.998% pure Nitrogen which is filtered to .003 micron at the point of use. The cleaning and packaging is done in a class 100< cleanroom. |
|
Steel tube with solid brass sleeve cover
Inner tube: Steel
Outer tube: solid brass 63/37
Available also with different finishings: polished and clear-lacquered, chome-plated, nickel-plated, nickel-matt, browned, circular and lenghtwise brush
Diameters between 9 and 40mm
Material strenghts: 0,8mm
Lengths: up to 5000mm
Same premium surface as full brass tubes, but with a considerable price advantage |
|
Stainless steel pipe fittings for dairy and food industries
Béné Inox offers you a complete range of unions and pipes fittings
stainless steel 304L and 316L
for SMS, DIN, Tri-clamp, Macon standars
Butterfly valves (manual or automated), pneumatic seat valves
Check valves, filters, sigth glasses...
Unions for welding, unions for expanding, unions for hose fitting
male part, liner, nut, blind nut, with EPDM/FKM/Viton/PTFE gasket...
SMS/BSP adaptor, DIN/BSP adaptor
Bend at 90°, at 45°, at 180°, tee, reduced tee
Concentric reducer, excentric reducer, pipe cap, collar
Threaded stirrup, clamp, pipe holder, pipe
We also have an "industry" range of fittings (ISO,ANSI standards...) :
Valves, unions, flanges, elbows, tees, réducers... |
|
PREMANT®
Ultramodern technology for efficient production
Our pipes are available in dimensions from DN 20 to DN 1000; the types of foam insulation, medium pipes and the system for the monitoring wires can be selected freely.
Thanks to our modern production facilities, we can react rapidly to your requirements. |
|
Tubular products
Sandvik is a world leading producer of seamless stainless steel tubes. We have total control over the entire production process from steel melt to the finished product. Our tubes are typically used within industries such as: chemical and petrochemical, oil and gas, power generation, fertilizer, pulp and paper and mechanical. |
|
Description
SMT Santrade keeps a large assortment of Welded and Seamless Tubes and Pipes on stock:
Seamless ANSI: ½" to 12" with sch10s to sch160s
Welded ANSI: ½" to 24" with sch5s to sch40s
Welded ISO /DIN: DN10 to DN600
Grades
Standard grades 304/304L, 316/316L, 1.4541, 1.4571 |
|
Covered pipes in acciao in teflon
SAT pipes in steel covered in: Teflons vergine, Teflon pfa, Teflon fep are realized inside of clean room with the ns. press to injection, we use only certifyd raw materials like teflon pfa Du Pont.
SAT and certifyd ISO 9001, during is made of injection of the Teflon pfa has a constant control of the qualita' of the product.
All the members are realized with special alloys that do not release impurita'. Therefore the ns. pipings can be used with ultrapure acids and solvents universal also.
We can cover having pipings inner dn 15 to dn 1200, with pure teflon, while with teflon pfa and fep we can cover till max dn 300 in the length till mt 6, Besides pipings we can cover: elbows to 30, 60, 90° also flangiati, tes, special fittings and reductions standard and custom. |
|
* EUCARIGID-RK :
Pipes made of PVC for underground waterdistribution
from diameter 16 to 50 mm - with BENOR quality label
following NBN EN 1452
* EUCARIGID-RW :
Pipes and fittings made of PVC for underground waterdistribution
from diameter 63 to 225 mm - with BENOR quality label
following NBN EN 1452 |
|
Aluminium Oval Tube 30x15x1mm
Aluminum Tube ideal as wardrobe rail in length up to 5000mm.
Colour: silver-matt |
|
|
|
