Optical blanks for prisms

P. 1
Optical Elements (also with AR coating) ? Prisms ? Optical Filters (absorption as well as interference) ? Blanks SCHOTT has always been known for offering complete solutions. Our portfolio includes not only components to be used within a laser system but also elements which enable a safe working

P. 2
which can be used in the wavelength range from 0.157 ìm to 12.0 ìm. SCHOTT also manufactures optical components ? lenses, beam splitters, polarizers, mirrors, prisms, windows, blanks, filters ? for different wavelengths ranging as shown in the following pages. and good coatability make it suitable

P. 8
are custom designed for grinding and polishing infrared optics. The finished products produced in our facilities include windows, lenses, prisms, modulators, waveplates, mirrors, beamsplitters, and cylinders. In addition to finished optics, we also produce generated, core-drilled, and sufficient material to

P. 7
. The reaction deposits the material in crystalline form on the deposition plates. Following the removal from the furnace, material is cut, polished, and tested for optical quality. The material is then used to produce optics or sold as sheet stock or optic blanks. CRYSTAL GROWTH Products Offered II

P. 42
) or any other convenient angle. Custom-designed features, such as water cooling and nonstandard mounting configurations, are available upon request. Prisms and transmissive beamsplitters are common optical elements used to split laser beams into two separate beams. These devices are common at visible and the IR

P. 19
36 888.558.1504 (toll-free in USA and Canada) 724.352.1504 (phone) 724.352.4980 (fax) www.iiviinfrared.com 37 MATERIAL BLANKS Surface Finishes II-VI Infrared offers the following surface finishes on ZnSe, ZnS, and ZnS MS blanks. Core-drilled blanks may contain any of the standard surface

P. 35
68 888.558.1504 (toll-free in USA and Canada) 724.352.1504 (phone) 724.352.4980 (fax) www.iiviinfrared.com 69 PRISMS & RHOMBS It?s often necessary to alter or manipulate the source?s polarization. For example, a reflective phase retarder converts linear to circular polarization and improves

P. 6
dimensions of the finished éléments. Surface stock for lens of prism blanks shall be measured from the lowest point of the "sink,1' i.e., the dépression on the upper molded surface created by the cooling of the blank. Unless otherwise specified on the drawings, additional material for grinding stock

P. 13
screen Ll - Collimating lens L2 - Objective lens P - Sample in liquid fij.led cell S - Monochromatic light source Figure 2. Striae inspection system - Method 2. B. Box L. Lamp (100 watts) 0. Optical blank P. Black paper R. Rays scattered by bubbles and defects S. Shield T

P. 14
, consisting of only one type and size of preserved optical glass plates, slabs, or formed blanks packed as specified in 5.1.1, shall be packed in overseas cleated plywood or mailed wood boxes conforming to PPP-B-601 or PPP-B-621. 5.2.2 Level B. Preserved glass shall be packed in a weather résistant fiber

P. 12
on a dark field. This test method is preferred when the sample has two polished surfaces. 4.4.8.2 Method 2. Sample to be inspected shall be immersed in an optical cell containing a liquid having the same refractive index as the sample. The sample is illuminated by a beam of light from the side

P. 10
pressings or continuous production and the blanks can not be identified by the melt of glass from which they are made, the refractive index (4-4.3) and Abbe constant (4.4-4) tests shall be conducted on représentative samples as follows: No. defects No. in lot size Sample size to reject lot 0 - 25

P. 22
Optical Glass 9. Forms of Supply 9.1 Extruded Bar (E-Bar) Two opposite sides, though not polished, may permit visual internal inspection, and the remaining sides are fire-polished or as cast. Bevels at the edges may vary depending on the dimensions of Extruded Bar. 9.2 Pressed Blanks Pressed

P. 19
x 10-5 for the i and t lines, and up to ± 1 x 10-5 for the rest of the lines, as well as a dispersion with a precision up to ± 3 x 10-6. 8.2 Optical Homogeneity For large-sized glass blanks used in extremely high-precision optical systems, variations in the refractive index within a single piece

P. 3
Optical Glass 9. Forms of Supply...................................................................................................................................22 9.1 Extruded Bar (E

P. 9
Optical Glass 3. Chemical Properties In various processes of fabricating optical components such as lenses and prisms, surface deterioration is often encountered and recognized as dimming, staining and latent scratching. These surface defects are caused by chemical reactions of the glass

P. 1
Optical Glass HOYA CORPORATION USA OPTICS DIVISION

P. 39
Microbench Germany-Phone: +49 (0) 551/ 6935-0 France-Phone: +33 - 47 25 20 420 55 Microbench Item Title Order-No Clamp holder for prism G06 1641 000 Clamp holder for prism Clamp holder for prism ? For mounting optical components (prisms, beam splitting cubes, thin-film polarizers, 10 x 17

P. 38
mirrors, beamsplitter plates, filters, etc. into beam path ? Optical components cement into place Please find detailed information about glueing optics on prism and mirror holder in our Brochure "Microbench, Bench and Rail systems - Introduction, solutions and applications" (download at www

P. 35
with internal hexagon ? Two Allen wrenches included ? Independently adjustable axes ? Ø 14 mm (clear aperture) through bore in mirror mounting surface ? Ø 8 mm (clear aperture) through bore the base Please find detailed information about glueing optics on prism and mirror holder in our Brochure

P. 58
74 US-Phone +1 585 223-2370 UK-Phone +44 2380 744 500 Item Title Order-No Polyamide plugs G06 1015 000 Polyamide plugs Polyamide plugs The plugs prevent optics from tipping over during rotation or subsequent attachment (no backlash). ? 1.5 x 1.5 mm (qty. 100) ? To insert in beam steering

P. 3
Tilting platform 52 Prism table 25, adjustable 52 Prism support 30, adjustable 52 Positioning ring 30 53 Beam steering mirror assembly 53 Beam steering mirror holder 30 54 Optic support 25 54 Clamp holder for prism 55 Prism support 25 55 Prism table 25 55 Adjustable optic holder 31.5 56 Mirror