|
|
| Known for their reliability and precision, the Fischer Connectors products are used in fields requiring faultless quality. Our plastic, hybrid and disposable connector series are ideally suited for use in medical applications. |
|
| Specifically designed for disposable medical devices, the Fischer L.U.C.TM (Limited Use Connector) truly plugs low cost into high performance. |
|
We are a leading supplier of RF connectors for signal (voice / data) transmissions with many years of experience engineering and producing coaxial connectors.
Standard connectors, and those designed according to customer specifications, are used in the following applications
- cabinet to cabinet
- racks
- panel to filters
- printed computer boards (PCB)
- daughtercards to motherboards and
- various cables interconnections |
|
FCI offers a complete range of reliable, cost effective and innovative solutions for automotive applications. FCI provides connectors systems for engine, cockpit, safety, multimedia and other electronic applications. Through outstanding quality, cost competitiveness and delivery performance, FCI is recognized by its customers as their strategic partner.
Applications, products and services :
> Passenger cars & light vehicles
> Motorized vehicles
|
|
| Rosenberger FAKRA*-RF connectors have been especially designed to fulfill the tough requirements of the automotive industry. A comprehensive coding system offers 11 mechanically keyed and colored coded housings for modern automotive applications, e. g. GPS, keyless entry or GSM mobile radio. |
|
IDC Female Connectors For Cables
Type C
Right Angle Female Connectors
Type Q
Type Q/2
Type Q/3
Type R
Type R/2
Type R/3
Type RD
Type TE
Right Angle Male Connectors
Type B
Type B/2
Type B/3
Type C
Type C/2
Type C/3
Type CD
Type D
Type E
Type E160
Type E80
Type F
Type H-F
Type H11
Type H15
Type M
Eurocard Center Connector
Vertical Female Connectors
Type B
Type B/2
Type B/3
Type C
Type C/2
Type C/3
Type CD
Type D
Type E
Type E160
Type E80
Type F
Type H-F
Type H11
Type H15
Type M
Eurocard Center Connector
Vertical Male Connectors
Type Q
Type Q/2
Type Q/3
Type R
Type R/2
Type R/3
Type RD
Type TE
|
|
The AVX offers a broad range Battery Connectors which are suitable for handheld and portable applications such as: scanners, PDAs, cellphones, industrial modules and medical electronics
If you have any specific requirements, please contact your local AVX sales office for details on how AVX Battery Connectors can assist you in addressing your future requirements, or visit http://www.avx.com/prodinfo_catlist.asp?ParentID=188 for catalog pdfs
|
|
BASICS+
Basics+ brings together our proven, standard connectors for board-to-board and wire/cable-to-board applications. Our goal is to save you time by providing “Easy To Use” services. All services are accessible via the dedicated Basics+ web site : www.fciconnect.com/basics
EASY TO SELECT A PRODUCT
This catalogue provides an easy overview of the most standard Basics+ products. For even more choice, our web catalogue provides the step search possibility that guides you step-by-step to your part number
EASY TO GET DOCUMENTATION
Data sheets, product drawings, specifications, application notes, packaging drawings and more are available on the web site for download.
EASY TO GET TECHNICAL SUPPORT
Get your technical questions answered within 24 hours on our e-mail hotline basics.help@fciconnect.com
EASY TO GET SAMPLES
Order a sample today, and you can start to work with your Basics+ product right away! Sample orders can be placed via the web site.
EASY TO GET COMMERCIAL INFORMATION
As a customer, you can have registered online access to prices, packaging quantities, minimum order quantities, and lead times. All the commercial information you need is at your fingertips. |
|
Tyco Electronics' HXC125 Board-to-Board Connectors offer a high performance, high density interconnect for today's design challenges.
Connectors are available in 1mm to 4mm heights, with centerline spacing as low as 1mm. This solderless, compression system allows for ease of assembly while offering excellent power management capability. Standard 1.0 mm contacts are rated to 4 Amps each.
|
|
2.54mm Board to Cable Connectors (Latch Headers) Series LPV acc. to IEC 60603-13
Female connectors
IDC
Interlocking latches
Male connectors, with interlocking
Solder
Pressfit
THR (black)
Male connectors, without interlocking (low profile)
Solder
Pressfit
Strain relief clamp |
|
Mencom Corporation cable connectors, often referred to as circular connectors, are produced in a variety of configurations. They are available in molded cable, receptacle, or field wireable with several wire color code choices as well as multi pole choices. Mencom is the only manufacturer to number both the face and the wires on their circular connectors.
Products:
CABLE GLANDS
CAPS
JUNCTION BLOCKS
TERMINATING PLUGS
T's
|
|
Woodhead Introduces the most significant innovation in industrial connectors in 30 years!
NEW! Ultra-Lock Connector System
Next Generation M12 Connector Technology
Fast - Simple - Secure |
|
FAST AND CENTRALISED ON-SITE CONNECTION OF YOUR ENERGY CIRCUITS FOR PROCESS AND MAINTENANCE EQUIPMENT.
- compressed air
- cooling fluids
- industrial vacuum
- electricity
To satisfy your requirements in terms of simultaneous connection of air, cooling fluids and electricity, Stäubli has developed the Combitac programme.
CENTRALISED CONNECTIONS FOR MORE PRODUCTIVITY AND BETTER SAFETY.
With the Stäubli CombiTac system, you connect and disconnect your air, cooling and electrical circuits in a single motion with no crossed connection: you save time and improve safety.
COMPLETE AND TAILORED SOLUTION TO FULFIL YOUR NEED
The CombiTac programme, offers you:
- on one hand, complete pneumatic system designed by our R&D department.
- on the other, a wide choice of module units to enable you to configurate the CombiTac solution the best suited to your application.
|
|
Tyco Electronics offers a broad portfolio of connectors for main Memory modules, removable Memory cards and microprocessors made to the many industry standard specifications.
The Tyco Electronics main Memory connectors are made to JEDEC industry standards for SIMM (Single In-line Memory Modules) and DIMM (Dual In-line Memory Modules) for computer and communication applications. Each product family consists of vertical, right-angle and various angled configurations in solder tail, press fit and SMT mounting options. |
|
SAL Connectors
The dimensions and construction of the CONEC SAL connector series comply with IEC 61076-2-101.
They are used in many applications in the field of automation technology for signal transmission, power transmission or for data communication in field bus technology.
...with overmoulded cables
reduce installation costs and save time drastically, through the use of connectors with integral wires.
The choice of material and the construction of the connector enable it to be used in a dirty and damp industrial environment.
...for special requirements
are often made of special materials concerning their chemical resistance and temperature stability. CONEC has developed special products for these areas. Special materials are available for a temperature range of 125°C for 6000 h.
Field attachable connectors ...
can be assembled freely and are often required for individual cable lengths, e.g. for the construction of special purpose machines.CONEC offers 4 and 5-pin models here in an axial and angled construction for connectors and adapters. In the angled construction the cable outlet is adjustable in a 90° pitch to the pin layout.
Chassis connectors
Installation flanges are used to produce an M12x1 connection on the device. A newly developed modular system makes it possible to produce a wide variety of combinations among one another.
Fieldbus technology ...
has increased dramatically in the industrial sector over the last few years. CONEC offers connectors for Profibus DP and Industrial Ethernet. Integral M12x1 connectors with corresponding pin layout coding (in acc. to IEC 61076-2-101 standards) are available for both bus systems. |
|
- Push-Pull Connectors made you of plastic
- 7 Colour-Codings
- Solder- and PCB termination
- 1-14 postions, Special Inserts e.g. Fiber optic, Fluid
- sterilizeable / autoclaveable
- Easy mounting of the connector
- Housing 100 % Touch proof
- Low weight
- Low mating and demating forces
- High chemical resistance
- Special solution like “Disposable”
- Modification of the catalogue version possible |
|
| Coaxial Connectors: Datalink designs and manufactures coaxial connectors. Our connectors work at most demanding applications and have superior performance in typical frequencies of 900MHz, 2,4GHz, 5,8GHz, 6GHz and 8,4GHz. Currently more than half of Datalink's production is destined for the markets of U.S.A., Europe and Japan. Some types of connectors: Type N, TNC, EIA 7/8", SMA. |
|
To have more information about Fischer Coax / Triax connectors, please refer to our General Catalogue by clicking on the link below.
To have more information about Fischer Nim-Camac connectors, please refer to our Nim-Camac Series catalogue by clicking on the link below. |
|
Rosenberger offers a wide range of high-frequency coaxial connectors.
If you are interested please get in contact. |
|
Bus Connector for PROFIBUS 90°
The compact design of the bus connectors from the Systeme Helmholz GmbH makes them suitable for use in all Siemens CPU types.
A slide switch sets whether the connector will be used as a node or end of segment. The switch can also be operated when the connector is plugged. The switch setting is clearly visible.
The connector must be used as a node („OFF“) when the incoming bus (A1, B1) and the outgoing bus (A2, B2) are to be interconnected. This deactivates the terminating resistors.
The connector must be set as a segment end (“ON”), on the first and last (extreme) stations of the segment. In that case the terminating resistors are connected on the incoming bus, the outgoing bus is disconnected.
|
|
With operations in 30 countries and sales of 1.3 billion euros in 2006, FCI is a leading manufacturer of connectors. Our 13,500 employees are committed to providing customers with high-quality, innovative products for a wide range of consumer and industrial applications.FCI designs and manufactures connectors solutions targeting the following market applications:
> AUTOMOTIVE
FCI provides connectors systems for engine, cockpit, safety, multimedia and other electronic applications. Through outstanding quality, cost competitiveness and delivery performance, FCI is recognized by its customers as their strategic partner.
> ELECTRONICS
FCI is a leading supplier of interconnect solutions for networks
and telecommunication infrastructures, consumer electronics, data storage,
medical and instrumentation applications.
> ELECTRICAL
FCI provides a complete range of electrical products that cater to the
vast power utility sector, including construction, maintenance and repair,
public services and central office. We are constantly adding to our range
of products and services by producing targeted solutions for the most demanding tasks.
> MICROCONNECTIONS
FCI is the world’s leading supplier of micro circuitry on flexible films
for smart card applications. FCI has solid expertise in consumer peripherals, antennas for RFID applications and flexible circuits for customized applications. |
|
| Mencom Corporation manufacturers a wide range of PVC, PUR, and Hi-Flex quick disconnect cables. The product lines include; standard MIN (M18,) MICRO (M12,) and NAN (M8) cord sets and field wireable connectors. In addition to the cord sets, Mencom also offers a full line of mating receptacles, cable glands, and other accessories |
|
Round Connectors (unenclosed)
Round Connectors single-pole, insulated
Round Connectors single-pole, insulated, with bayonet locking
MC-Multilam%u2122 plugs uninsulated
Connectors for plug-in systems
CombiTac The modular plug connector system
Motor terminal plug
Miniature connectors
Rapid connection systems for feeding into the grid
Electrical contacts for railway technology
Round Connectors 16BV with bayonet locking
Flat contact clamp with integrated fuse
|
|
The company Turck offers tailor-made connectors for application in the harsh process periphery. The connector programme comprises male and female connectors, male and female flange connectors, field-wireable male and female connectors, extension cables, 8 and 4-port junctions, Y-junctions and block junctions in M12 x 1, M8 x 1, Ø 8mm, 1/2‘‘, 7/8‘‘, M16 x 0.75, M23 x 1 technology. Connectors with premoulded cables come in standard lengths of 2, 5 and 10 m. The extension cables come in standard lengths of 1, 1.5, 2 and 5 m. Special lengths and cable materials are available on request.
Field-wireable connector types complement the range, so that the customer can continue to use existing cabling concepts. There is a female connector for every pluggable TURCK sensor. |
|
The electrical connection of sensors via connectors has become more and more important in the last few years. Easy handling as well as high uptime of the machine are paramount for the customer and require high-quality and reliable products.
Due to the large variety of sensor designs ifm electronic supplies a wide standard range of high-quality products covering the families M8, M12, M18 through to the valve connectors.
The M12 design in particular has become firmly established on the sensor market for many years and is therefore the preferred choice for extremely harsh applications.
To be able to meet the different application requirements three product series have been developed with the following application focus. |
|
Modular Jacks: RJ11, RJ45, with/without integrated magnetics
Modular Jack; MJC Series - Modular Coupler
Panel Couplers
Modular Jack; MJD Series - Stacked Jacks, 2 to 16 Ports
RJ45, 2X1
RJ45, 2X2
RJ45, 2X3
RJ45, 2X4
RJ45, 2X6
RJ45, 2X8
Modular Jack; MJE Series - Single Port Right Angle Jacks with Tab Up and LED
RJ45 Shielded
Modular Jack; MJLS Series - Single Port Right Angle Jacks
RJ11, Shielded, 11.75 mm (0.463") Height
RJ45, Shielded, 11.75 mm (0.463") Height
Modular Jack; MJR Series - Single and Ganged Jacks, Shielded or Non Shielded
RJ11, Single Port
RJ45, 1x12
RJ45, 1x2
RJ45, 1X4
RJ45, 1x6
RJ45, 1x8
RJ45, Single Port
Modular Jack; MJV Series - Vertical Jacks
RJ45, MJDV - 2x4
RJ45, MJHV - Single Port
RJ45, MJRV - 1x4
Modular Jacks with Integrated Magnetics; 10 BASE T
R/A Ganged
R/A Single Port
Modular Jacks with Integrated Magnetics; 10/100 for Power over Ethernet
R/A Ganged
R/A Single Port
Modular Jacks with Integrated Magnetics; 10/100 MBit/s
R/A Ganged
R/A Single Port
R/A, Single Port, Tab Up
Vertical Single Port
Modular Jacks with Integrated Magnetics; 10/100 with Lightning Protection (GR-1089-CORE)
R/A Single Port
Modular Jacks with Integrated Magnetics; 10/100, High Operating
Temperature
R/A Ganged
R/A Single Port
Modular Jacks with Integrated Magnetics; Gigabit - 10/100/1000 MBit/s
R/A Ganged
R/A Single Port
R/A Single Port, 11.94 mm (0.470") Height
R/A, Single Port, Tab Up
Vertical Single Port
|
|
FCI is a leading supplier of interconnect solutions for networks and telecommunication infrastructures, consumer electronics, data storage, medical and Instrumentation applications. We continually develop innovative high-speed and miniaturized connectors to bring cost-effective products to the market.
Applications, products and services
> Communications
> Industrial, Instrumentation & Medical
> Data
> Consumer Electronics
> Automotive through specific Applications
|
|
| Rugged, sealed, lightweight and compact, our products are ideally suited for use in defense and security applications. Examples of mission-critical applications, for which our company supplies the highest level of interconnection engineering include: communication systems, video equipments, night vision systems or rugged computers. |
|
FCI-BURNDY® Products are manufactured by Electrical Power Interconnect Division which is part of the third largest connector manufacturer in the world, and provides reliable connection systems and solutions to the Telecommunications, Data, Industrial, Instrumentation and Energy Industries.
Exceptional customer service, the industry's highest quality products, and continuous innovation are the things that FCI-BURNDY® Products prides itself on providing.
We have a wide range of tooling for all your connector needs and an electrical connector to meet every one of your power needs. Connectors are available for splicing, tapping, terminating, for conducting or grounding with system-designed tools for application by hydraulic, mechanical or powder actuated.
With superior manufacturing technology, FCI-BURNDY® Products can create and build any custom connector for our valued customer with our advanced engineering support teams.
With 80 years of dedicated customer support in both service and product, our customers need to look no further than FCI-BURNDY® Products for all their connector needs.
To know more : www.fciconnect.com |
|
|
