|
|
VCC's LCS Series Litepipe® provides display panel moisture seal and 180° viewing angle. This lens and Litepipe® unit was developed to provide moisture sealing and dust control for display panels when the LED is attached to a circuit board.
Currently, the moisture sealing of a Litepipe® to a display panel requires the use of RTV-type adhesive. When applying glue for sealing, special precautions must be taken to avoid creating air gaps that would allow sealed joints to leak. Glues are not only difficult to apply but their adhesion to a lightpipe surface will change the flow of the light pattern. This also causes light leakage resulting in reduction of light emitted by the litepipe. In addition, the output surface of a lightpipe alone whether flat, concave, or convex projects little or no sidelight. This gluing method results in serious assembly problems and less than satisfactory panel displays.
|
|
|
Illumination from 360˚ produces a uniform light. These light guides are optimum for CCD camera and microscope inspections.
|
|
Flexible Light Pipes
Flexible Light Pipe Assembly
Flexible Light Pipe IP67 Watertight Lens Assembly
Flexible Light Pipe Infrared Lens Assembly
Flexible Light Pipe Lens
Flexible Light Pipe Through-Hole Assembly
Flexible Light Pipe SMD LED Assembly
Rigid Light Pipes
90 ° Multi-level SMD Style
Panel Mount Light Pipe Rear-Mount
Panel Mount Light Pipe Front Mount
Panel Mount Light Pipe Dual Lens Style
90 ° Variable Centerline SMD
Vertical Board Mount Round SMD
Vertical Board Mount Rectangular SMD
|
|
| ... products without technical information |
| |
New LED light source:
- with lithium-storage-battery
- light intensity stepless adjustable
- battery-supplied and rechargeable
- extraordinary compact design (27 x 89 mm, 90 g)
- ACMI-connection - almost unlimited compatibility
- no bulb exchange necessary due to LED technique
- 45 minutes operating time at maximum power
- at least 100 lm light output
- 2 h charge time
Furthermore we offer a lot of other lighting accessory items, aimed at your individual requirements:
Light source metal halide MS-24:
- short arc lamp, 24 watt
- compact design (length=114,3mm, width=83,8mm, length 83,8mm)
- light illumination ≥ 70.000 Lux
Halogen-light source:
- 100 or 150 Watt
- stepless adjustable
Light guides:
- with different diameters and lengths
- with bonded or fused fibres
Further information about the several product groups and their particular advantages you can find on our webpage.
|
|
KARL STORZ only uses cold light projectors with its endoscopic products. With this technology, light from the cold-light projector is transmitted through a fiberoptical or fluid lightguide to the endoscope tip.
Cold-light technology offers many benefits:
• Very bright light
• Heavy-duty, robust technology
• Compact size of fiberoptical lightguide
• Does not contain any significant heat radiation
Cold light is suitable for testing in potentially explosive environments. KARL STORZ cold light projectors are available with a choice of different lamp systems and performance levels, enabling us to provide you with the optimum light source for any conceivable application.
|
|
Xenon light projectors
The light projectors from Richard Wolf GmbH from 180W to 300 W are especially matched to endoscopic applications and are for interdisciplinary use. Automatic light regulation optimises the luminous flux and ensures ideal light conditions.
Our local medical product advisor will be pleased to provide you more details about our products, or simply request our catalogue.
|
|
|
Portable Xtreme LED light sources are a convenient, easy to use, substitute for bulky halogen or metal halide light sources. These Xtreme light sources feature a high intensity 3W LED, which produces well over 50,000 Lux of illumination, and an adjustable intensity control lever, to vary the illumination for different inspection areas, or areas with reflective surfaces.
|
|
|
The light sources are in fact external boxes which produce illumination intended to clarify the inspection area. These boxes allow a beam of light to pass through a fibre optic to the point to be inspected. At FORT, a full range of sources is available with different types of lamps and levels of power in order to meet the needs of a variety of working environments.
|
|
high intensity light source for endoscopy, video documentation and image processing
Advantage:
highest light intensity and colour realness for continious process control and recognition of smallest defects
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
|
|
|
|
Get the attention you need with LKEH series signal tower with voice message/audible alarm hybrid unit.
* Available in voice message type (LKEH-FV) and 32 pre-recorded sounds type (LKEH-FA/FC/FD/FE)
* Size: 100mm diameter
* Available in 24V DC, 100V AC and 220V AC versions
* Volume is adjustable from 0 to 105dB at 1 meter
* Continuous or flashing light
* Colors available: red, amber, green, blue and clear/white
* LED modules are interchangeable and stackable after purchase (up to 4 modules)
* Units are shipped completely pre-wired and pre-assembled
LKEH-FV (Voice synthesizer)
* Voice message or sound data is field-programmable with SD card (SD card is sold separately)
* Total recording time of 64 seconds (64kbit/s) can be divided up to 5
channels by bit input or 31 channels by binary input
LKEH-FA/FC/FD/FE (32 pre-recorded sounds)
* 32 sounds are pre-recorded in one unit. 4 sound types are available
* Select one sound group to play back 8 sounds by bit input or 32 sounds can be played back by binary input
Available by Special Order
* PNP open collector transistor type
|
|
|
|
|
|
Pick-to-Light System
This paperless pick-to-light system (order picking systems) may be used for directed picking (pulling) product or directed putting (placing) product as an economical alternative to manual picking or putting (placing) of product for lower volume operations. It is designed to electronically assist sorting personnel in pulling (pick) or placing (put) SKU's to meet order requirements. It removes the thinking and reading aspect at the pick or put level by using a scanner or other input to identify an order and lights and numbers to identify product and pick/put quantity.
System Benefits of Pick-to-Light System
-Sorting and picking productivity is more than doubled over manual picks.
- Substantially reduced interpretation errors since orders and bar codes are scanned and not read.
- Sortation and picking accuracy is greatly increased due to directed picks/puts.
- Real-time order tracking.
- Seamless integration with the overall processes
Common Features of Pick-to-Light System
- Windows graphical user interface
- Seamless integration with existing Warehouse Management Systems and Conveyor Control Systems
-Modular design for growth
- Open database connectivity for easy creation of reports
- Low cost automated solution
|
|
|
|
|
|
M3 Picking
M3 picking shelving is formed by vertical frames and horizontal shelves, and enables individual products to be stored in small boxes. Various accessories permit levels to be divided up and drawers to be fitted in order to classify single products, such as archives, folders, hanging items, etc.
Advantages:
- Basic manual storage and archiving system for medium or light loads.
- Easy to assemble.
- Multiple units that adapt to the most demanding requirements.
The ideal solution for offices, shops and spaces where a more attractive appearance is needed.
One or more gangways giving access to upper levels can be installed. The shelving can also be mounted on mobile bases.
Simplos shelving
An excellent storage solution for medium and light loads. A wide range of accessories is available to increase functionality: drawers, dividers, side panels, back panels, plinths. etc.
Advantages:
- Quick and easy to assemble, excellent loading capacity and stability.
- Smart and attractive design which blends in with any setting.
|
|
Shelf G3 galva
OF Professional SHELF
economic and general-purpose Shelf.
Resist corrosion thanks to the galvanized completion.
The amounts Heights standards: 2000 to 12000.
Cross-pieces 20, 30, 40, 50, 60, 70, and 80 cm of depth.
Each level consists of two cross-pieces.
It is the only shelf on the market with being evolutionary in time: flexible in its depth, its loads, its height.
|
|
- Shelving for storage and protection of goods or small parts.
- Shelving adapted to suspended files, archives boxes, pull-out drawers, ...
Many accessories.
|
|
9T36 Shelving, 4-Shelf Unit
Store, organize and transport in style with durable and attractive shelving units.
- Smooth contours add hi-tech appearance; won't snag clothing.
- Aluminum uprights are stylish and non-corrosive.
- Steel reinforced shelving enables 800 lb (362.9 kg) total weight capacity.
- Stable footing prevents tipping.
- Mobile shelf available with 4 or 5 shelf configurations 60" to 72" (152.4 cm to 189.2 cm) high.
- X-tra Mobile Shelf Trucks have 5" (12.7 cm) diameter, locking and non-marking swivel casters that aide mobility.
- Shelving resists rust, dents and chips.
- Solid shelves have perimeter lip to contain items and catch spills.
- Stationary shelves have sturdy feet designed to enhance stability and appearance.
- All shelves are reinforced with metal supports.
|
|
|
|
|
|
EZ-LIGHTTM Pick-to-light solutions
K50 Series
Indicates pick status of part bins, using a large translucent dome
- Housed in a completely self-contained unit
- Rated IP67 to withstand harsh environments
- Available in fixed-field background suppression, long-range retroreflective and push-button models
PVD Series
A one-part array with solid or blinking job lights for part picking assemblies
- Equipped with diffuse or retroreflective sensing modes in the same unit
- Features automated setup and wide beam pattern for easy alignment
- Offers compact unobtrusive package size of 30 x 16.4 mm
PVA Series
A two-part array with extended long distance sensing range
- Features an asynchronous emitter and receiver
- Operates with up to 2 m separation
- Offers indication on both sides of the picking target
VTB Series
An effortless and ergonomically safe push button alternative
- Ergonomically designed to eliminate physical stress
- Useful as an automated call for parts system
- Immune to ambient light, EMI and RFI interference
|
|
|
|
|
|
Of your buildings of files to your workshop, the tubular shelf light ProfilTUB will answer the whole of your needs for installation for the storage of small volumes.
Its high level of completion (epoxy painting) like its strong modularity (great choice heights, depths and lengths) make of it an accessory impossible to circumvent of the arrangement which will follow you into your office.
Spare parts, stock-plug, supplies, consumable, files will thus find their place on flexible shelves in height with the step of 50 mm and having a capacity load going up to 250 kg.
A complement of locking of the levels is done by a plastic pin of safety avoiding any risk of unhooking.
Many supports of shelves are at disposal:
- Fiberboards compressed,
- PS white shock,
- galvanized floorings or
- above wire out of coated with zinc steel fabric.
Composition:
- Kit Departure: 4 amounts - 5 shelves - 5 tops
- Kit Continuation: 2 amounts - 5 shelves - 5 tops
Dimensions:
- Length: from 1000 to 1200 mm
- Depth: from 300 to 1000 mm
- Height: from 2000 to 2200
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
