|
|
|
The Power Wizard™ power meter from Synrad offers a unique solution to the measurement of laser power and serves as a service tool to ensure maximum laser performance at any time. Designed to measure power levels from 1-250W, the PW-250 provides accurate measurement of average laser power, which is displayed on an easy-to-read LCD screen.
|
|
The QPM Family
Gentec-EO’s QPM Series is a fully automatic laser power probe that calculates laser power by measuring temperature dynamics using a microprocessor. Its measurement and acquisition technique determines the time needed to carry out a measurement. Data acquisition is triggered and stopped by detecting set heat parameter thresholds. This technique is virtually error free and allows for multiple measurements without absorber forced cooling.
Power Range
Six models cover the full-scale powers from 500 mW to 10 kW. Their innovative measurement concept cuts the time to measure and display down to ten seconds on all probe models providing:
# Excellent accuracy (± 3 to 4%)
# Repeatability (± 1 to 2%)
# High resolution
|
|
|
|
|
|
General description :
Coherent offers the broadest line of laser power meters and laser energy meters available anywhere. In addition, as the world's leading producer of laser systems, we thoroughly understand the practical requirements and challenges of using laser measurement tools. This puts Coherent in a unique position to configure a laser measurement system that provides the right combination of performance, features and cost for your particular needs. The modularity of the Coherent system also ensures that your investment will be protected as your needs evolve or change.
Our standard product line consists of four types of meters:
- Laser Power Meters
- Laser Energy Meters
- Laser Power and Energy Meters
- OEM Power and Energy Modules
Power-only and energy-only meters offer simplicity and economy. However, certain advanced capabilities are only available in dual (power and energy) meters, so these products should be considered, even if your use is purely for a single measurement type (power or energy).
|
|
|
Melles Griot offers a wide variety of power and energy meters. Our integrated, broadband power meter uses thermopile technology, has a flat response from 200 nm to 20 µm, and can measure output power from 10 µW to 2 W. Our modular power meter system is based around two control units and a plethora of calibrated, interchangeable, thermopile, semiconductor, and pyroelectric detector heads capable of measuring cw and pulsed output power ranging from a few picowatts to 50 watts.
|
|
|
|
|
|
Features
-NIST traceable calibration
-Measures power and wavelength with ILX Power/Waveheads
-Integrating sphere-based power measurements
-Measurement heads cover a wide wavelength range from 350 to 1700nm
-Power measurement up to 10W
-Free-space and fiber measurement heads
-Easy test system integration with standard GPIB interface
The OMM-6810B is the only power meter capable of measuring the optical power and wavelength of semiconductor lasers including short wavelength lasers, high power pumps, and fiber lasers. A variety of measurement heads cover wavelength ranges from 350 to 1700nm for power only or power and wavelength measurement.
In addition to precision power and wavelength measurements, the OMM-6810B is loaded with standard features such as log/linear display modes, auto ranging, user calibration, and reference measurement capability. All of these features plus an analog output and IEEE-standard GPIB interface combine to make this instrument a cost-effective laser diode development or production test tool.
|
|
|
Bi-Directional Insertion Loss Test System or multi-mode or single mode with either singlemode or multimode internal source.
|
|
|
Multichannel optical power meter with internal individual power meter modules for concurrent data acquisition with higher data acquisition rate.
|
|
Fastest Monitor in our Product Range!
The S-LINK-2 is Gentec-EO’s first Multi-Channel, PC-Based, Power and Energy Monitor. Faster than any other monitor in our product range, with 10 kHz of REAL TIME data transfer for each channel, with no missing points. That’s right, you get every single pulse transferred directly into your PC, at 10 000 times per second!
Features
# 2 Channels
# Reads Pyroelectric Metallic Absorbers up to 6 kHz
# Real Time data Transfer of 10 kHz/Channel, No Missing Points or Averaging!
# Communication Through USB or Ethernet
# True measurement of RMS & PTP Stability, Repetition Rate and # of Pulses with Pyroelectric Detectors
# External Trigger
# Compact Design
# Competitive Price
|
|
The SOLO 2 is our next generation SOLO monitor; making it our most complete handheld power and energy meter. You will find all the useful functions you liked on the SOLO PE, with improved performances and speed. Take a look at the main features of the SOLO 2:
# Reads both power and energy detectors
# Fast 200 Hz data transfer rate
# Reads fast energy detectors up to 3 kHz
# Large 78 x 58 mm LCD screen with backlight
# Full statistical functions in real time
# Unequalled 225 000 points data storage
# Fast prediction algorithm for accelerated power measurements
|
|
OAI's Model 306 UV Power Meter is a highly reliable direct reading Instrument designed expressly for measuring light intensity at the wafer plane of mask aligners, UV curing light sources, and any other UV light source. Special probes enable measurement of light in the visible range. Calibration accuracy is within +/- 3% and is NIST traceable. Measurement repeatability is within /- 1%. It is auto ranging from 0.1 to 1999 mw/cm2 full scale and has 1% linearity in this range. This instrument features meter to meter matchability.
|
|
|
These UV power meters are designed to measure and monitor the absolute optical power (mW/cm2) in the UV to vacuum UV region. These UV meters allow accurate UV measurement and control based on NIST standards for applications such as surface reforming and UV sterilization using excimer lamps or low-pressure mercury lamps, UV curing and semiconductor photolithography. UV power meters come with 6 types of sensor heads according to the wavelength needed.
|
|
| ... products without technical information |
| |
PM100-G - Fiber Optic Power Meter
Simple optical power and loss measurement
PM100-S - Fiber Optic Power Meter
Simple optical power and loss measurement
PM200 - Fiber Optic Power Meter
Link certification and reporting tool
FO600 - FiberMeter Optical Power Meter
FO610 - High Power FiberMeter Optical Power Meter
Ideal for testing and certifying in both Multimode and Single Mode applications
|
|
Ideal for link qualification, the FiberBasix 500 series comprises the ELS-500 Light Source and the EPM-500 Power Meter. These instruments come with pass/fail thresholds (LED indicator) and a memory capacity of 1000 data items.
Applications
Link-loss characterization (ELS-500 Light Source)
LAN/WAN certification (ELS-500 Light Source)
Link-loss characterization and LAN/WAN certification (EPM-500 Power Meter)
Key Features and Benefits
Error-free testing features: automatic wavelength recognition, and no offset nulling required
Data transfer to a PC via USB connection
One-touch storage of results for all wavelengths at once (on the EPM-500)
Complete reporting software
|
|
|
The OP510 was specifically designed for applications where cost effective solutions for measuring, monitoring and logging of insertion loss or power fluctuations are needed. The OP510 is a small (4"x2"x1.25") desk friendly module designed such that minimal movement and bending of the reference- and test cables is necessary. This results in stable, accurate and repeatable measurements.
|
|
The 236, 237, and 238 Source-Measure Units (SMU) are fully programmable instruments, capable of sourcing and measuring voltage or current simultaneously. These systems are really four instruments in one: voltage source, current source, voltage measure, and current measure.
Related Applications:
- MOSFET measurements
- GaAs measurements
- Bipolar measurements
- Diode characterization
- Oxide characteristics
- Electromigration testing
- Research and electronic manufacturing applications
|
|
The 236, 237, and 238 Source-Measure Units (SMU) are fully programmable instruments, capable of sourcing and measuring voltage or current simultaneously. These systems are really four instruments in one: voltage source, current source, voltage measure, and current measure.
Related Applications:
- MOSFET measurements
- GaAs measurements
- Bipolar measurements
- Diode characterization
- Oxide characteristics
- Electromigration testing
- Research and electronic manufacturing applications
|
|
Time to make a move to the new Schonstedt XT, the greatest innovation in magnetic locating since the celebrated "yellow stick". In its holster, the XT leaves both hands free on the way to the job site, then gives you the freedom to do your best work with one hand tied behind your back.
- One hand operation
- Operates in both retracted and extended modes
- Fingertip control of volume and sensitivity
- Quick change battery compartment
- Battery indicator on both models
|
|
|
|
