|
|
| ... products without technical information |
| |
With BL ident the user is free to choose interface modules in IP20 or IP67.
Interface modules with PROFINET-DP (DPV0 and DPV1), DeviceNet, Ethernet/Modbus TCP/IP, Ethernet/Profinet and Ethernet/IP with up to 8 channels are available.
Programmable gateways enable decentral and fast signal processing.
The modular concept allows the user to add input and output modules to the interface at a later stage.
All channels operate in parallel allowing data to be transmitted simultaneously.
The diagnostics for the fieldbus, the supply voltage and the individual channels is carried out via LEDs and complemented by fieldbus-specific diagnostic messages.
Standard function modules are available for simple integration in the control and fieldbus environments.
The application of the BL ident simple module (BL20-2RFID-S, BL67-2RFID-S) is also possible. This way the communication is built on the basis of an 8-byte I/O module. The programming effort is reduced considerably. The user has the freedom to link BL ident to all standard control systems without using function modules. |
|
Escort Memory Systems is known within the industry for products that support virtually every industrial communication protocol making them ideal for integrators and end users facing real life scenarios.
Our selection of interface modules for HF RFID systems feature a high level of connectivity to Industrial Ethernet networks and PLCs (Allen Bradley, Modbus and more).
Recently Escort Memory Systems has introduced several new Ethernet Gateways and Hubs for use with the Cobalt HF Series Antenna Controllers.
These modules features include:
- Easily integrate RFID data directly into an Ethernet host(standard and industrial)
- Build RS485 networks of multiple Controller/Antennas
- Industrial I/Os that can be linked to the Controller/Antennas to control stack lights conveyers etc. |
|
The RF identification system for production control.
- DTS125: Industrially compatible identification system in 125 kHz technology.
- Coding of workpiece carriers in routing conveyors.
- Quick and easy set-up: Plug and play.
- Read/write head requiring little space due to narrow design.
- Compact and at a low cost: Antenna and evaluation in one housing.
Innovation in production control
The constant increase of the degree of automation in modern production plants is increasingly supported by identification systems. Their tasks include for example the control or release of production steps or the assignment of information about each product. |
|
| ... products without technical information |
| |
* 19 Series Modular Auto On-Off Relay 10 A.
* 38 Series Relay Interface Modules 6 A
* 38 Series Relay Interface Modules 0.1 - 2 A
* 48 Series Relay Interface Modules 8 - 10 - 16 A
* 58 Series Relay Interface Modules 7 - 10 A
|
|
| Demonstrated quality and knowledge base on many applications. A wide range to answer all your requirements. |
|
1 pole 12 / 16 A, 2 pole 8 A, 1 CO contact or 2 CO contacts
DC- or AC coil
Sensitive coil 400 mW
Reinforced insulation, protection class II (VDE 0700)
5 kV / 10 mm coil-contact
1pole 12 A with 3.5 or 5 mm pinning
Recycleable packaging
RoHS compliant (Directive 2002/95/EC)
Applications
Panel boards, mechanical engineering |
|
| ... products without technical information |
| |
... see all the products in the category
Relays
|
The TCIC is Low cost high speed 8 channels thermocouple measurement interface board with USB and RS-232/485 interface. The TCIC supports thermocouple types J,K,E,R,S,T or ±500 millivolts at 1 microvolt resolution.
Main features:
On board cold junction compensation
On board temperature conversion functions enable stand-alone operation
USB interface as standard or USB + RS-232 /RS-485 (option)
Multiple boards may be connected via USB or RS485
8 opto-isolated outputs configurable as setpoints, latching alarms or user outputs
Comes with very useful software package and data logger
|
|
From simple Component Mounting Functions to more complex electronic operations, Connectwell can do the interfacing for you.
Our Standard range of interfaces includes:
- Relay Interfaces
- IDC/DSUB Connector to Discrete Converters
- Component Housings
- Power Distributors for Electronics
|
|
| ... products without technical information |
| |
* USBscope50 is a tiny PC based oscilloscope which connects via the USB port, combining the ease of use, portability and economy of PC based scopes with high performance normally associated with much larger bench oscilloscopes.
* USBwave12 is a new concept in USB function generator products. PC based function generators offer many user benefits including flexibility, ease of use and economy.
The USB interface has developed into probably the best and most widely implemented PC peripheral connection method and is a natural choice for the function generator.
* USBpulse100 is a new concept in USB Digital Pulse/Clock Generator products. PC based pulse generators deliver many user benefits including flexibility, ease of use and economy. They are an invaluable tool during design and debug of digital circuits and can be used to quickly test the behaviour of a circuit under different input frequency and duty cycle conditions.
* USBcount50 is a PC based frequency counter designed for maximum flexibility, ease of use and economy. It is an invaluable tool during design and debug of digital circuits and can be used to quickly to verify generated frequencies, pulse widths and duty cycles. |
|
Memory Card Explorer ("MCE" & "MCE/NT") is a graphical Windows software package which provides direct access to the data stored in flash, SRAM and ATA PCMCIA memory PC Cards. It allows the binary "image" of the card data to be saved to or loaded from the hard disk drive in simple and fast operations. Data between any two address blocks can be copied and edited.
The format of the data on the card is unimportant - it could be a TFFS style format, or it could be a proprietary format written by a logger or portable instrument, or it could contain a mixture of formats. In all cases MCE can access the data. Also included is a card viewer that allows direct hex display of the data on the card. |
|
The TCIC is Low cost high speed 8 channels thermocouple measurement interface board with USB and RS-232/485 interface. The TCIC supports thermocouple types J,K,E,R,S,T or ±500 millivolts at 1 microvolt resolution.
Main features:
On board cold junction compensation
On board temperature conversion functions enable stand-alone operation
USB interface as standard or USB + RS-232 /RS-485 (option)
Multiple boards may be connected via USB or RS485
8 opto-isolated outputs configurable as setpoints, latching alarms or user outputs
Comes with very useful software package and data logger
|
|
The ifm temperature sensors are based on a PT 1000 which converts the measured quantity of temperature into a signal as a result of the change in resistance. A microprocessor controls the evaluation of the electrical signal. For the efector 600 the system temperature is directly indicated on the unit by an LED display.
The electronic circuitry is made in film technology, i.e. a flexible, temperature-stable and extremely resistant polyimide film is used as a carrier for the SMD components. In conjunction with a special potting compound this leads to a high shock and vibration resistance. The microprocessor and the display make the handling of the efector 600 very simple. By means of programming buttons the values for switch point, hysteresis, switching frequency and delay time can be set electronically without the system temperature being present. This enables the installation of the efector 600 in a few minutes. The values are saved in an EEPROM independently of the supply voltage. |
|
OPTISPARK is the integrated control system developed in cooperation with Cannon AUTOMATA. It consists of two sections: an integrated control system and the user panel (Human Machine Interface).
The integrated control system performs many functions usually carried out by several components such as steam pressure, water level, alarm data acquisition, and it sees to thermal efficiency with the aid of the most advanced control systems: combustion control through electronic cams, control of the oxygen trim, of the flue gas re-circulation and of the air fan by means of an inverter.
The H.M.I. features are: synoptic screens with multi-language
texts; high-resolution colour touch screen display; real-time and historical tracking of selected process trends; alarm reports log; navigator system; multilanguage editor.
OPTISPARK connects to the modern communications systems: it sends SMS and e-mail in case of alarms event; it is displayed on both the Intranet and the Internet; it connects to supervision systems via OPC server.
OPTISPARK's main benefits are: the performance equivalent to the most advanced DCS systems at a lower cost, the optimised combustion, the reduction of environmental impact, of fuel and energy consumption, and of the time for starting and checking the boiler. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| Very High speed load cell interface that was especially designed for WIM application either trucks or trains. The LCIC-WIM comes with embedded application calculates "on the fly" the axle weight, axle speed and distance between axles. With 52000 samples per second high resolution A/D and powerful DSP that runs the WIM application on board, it consider to be the fastest and most intelligent Load Cell Interface that is available today in the market. The LCIC-WIM equipped with USB and RS232/485 and comes with drivers and full examples on how to communicate with the board and our monitoring package that helps to analyze the scale behavior under different speeds. |
|
| ... products without technical information |
| |
|
|
see the results for the following category
