|
|
Hitachi Mould Case Circuit Breaker ( Fuse-Free Breakers ) & Earth Leakage Breakers are designed for circuit protection of low-voltage distribution systems. They are suitable for applications as main breakers, protection of branch, feeder circuits and connected apapratus.
Quick contact inspection/ Easy contact replacement.
Easy wiring/ High safety/ High Reliability.
DIN rail mounting mechanism
|
|
(TFS140E)For Space and Military applications:
- Full set of SAW design principles for customized products
- Low volumes supported
- Internal matching ability
- Introduction of additional production steps for high reliability
|
|
Used in Communication & Comsumer Electronics 173.325MHz~687.25MHz Tube or T&R
Used in FM Broadcast System(1) 100.70MHz~106.50MHz Tube or T&R Used in FM Broadcast System(2) 106.70MHz~111.10MHz Tube or T&R Used in FM Broadcast System(3) 111.20MHz~115.20MHz Tube or T&R Used in FM Broadcast System(4 86.50MHz~118.70MHz Tube or T&R
|
|
- The 12F446Q is a low-loss, compact, and economical surface-acoustic-wave (SAW) filter in a low-profile metal F-11 case for FRS & PMR.
- The 12F914Q is a low-loss, compact, and economical surface-acoustic-wave (SAW) RF filter in a low-profile metal F-11 case with center frequency 914.5 MHz.
|
|
IF Filter for Intercarrier Application; IF Filter for Audio Application
IF Filter for Intercarrier/Multistandard Application;IF Filter for Video Application ; Bandpass Filter for DigitalTV&VOD;Bandpass Filter for Digital Radio;Filter for DigitalTV;IF Filter for Quasi/Split Sound Application
IF Filter For Video Application
|
|
Crystal filter is a crystal device that is used to pass through and or cut off frequency range within a frequency band.
SAW filter is a SAW device that is used to pass through and or cut off frequency range within a frequency band.
|
|
Using piezoelectric materials such as Lithium Tantalate（LiTaO3）and Lithium Niobate（LiNbO3）, Fujitsu provides SAW Devices for various applications.
SAW Devices of Fujitsu realize compact size, high performance, and high reliability, utilizing original design technologies, advanced micro-processing technology, and construction technology.
|
|
1.SCOPE
This specification shall cover the characteristics of 1-port SAW resonator used for remote-control security.
|
|
| ... products without technical information |
| |
Standard Features:
- Digital Auto-Temperature Controller
- Compact, heavy duty construction
- Cleanable aluminum air filters
- High-capacity filter assembly
- Forklift Access
- For coolant or non-sulphur oil duty
Optional Features:
- Self-priming circulation pump
- Installation Kit
- 460 VAC
- Non-copper units for sulphurized oil
- Casters for mobility
|
|
APEX high-perfprmance water coolers are freestanding and compact. Thy are designed and installed to control specialist processes ( electro-spindles, linear motors, laser, electron guns, vacuum pumps, etc ).
Special coolers have been developed for coolant fluids (emulsion and cutting oil).
RLC and RLCE range : 3 - 60 KW cooling power.
|
|
A system based on tapping chuck ant tap adapters for complete new concept.
The simplicity of mounting the tap, the rigidity and the perfect centering makes syncronized tapping easier to manage.
AVAILABLE IN:
HSK DIN 69893
DIN 69871
DIN 69880
DIN 1835 B+E
MAS BT
|
|
Briney BT Flange Tap Holders Rigid
Briney BT Flange Tap Holders T/C
Briney NMTB Flange Tap Holders T/C
Briney Straight Shank Tap Holders Rigid
Briney Straight Shank Tap Holders T/C
Briney Tap Adapters Positive Drive
Briney Tap Adapters Torque Control
Briney V Flange Tap Holders Rigid
Briney V Flange Tap Holders T/C
|
|
No influence on setting length if the pressure of coaling liquid is equal to or less than 70 bar.
Most of the torque caused by the threading will be taken up by the square in the bottom. The hydraulic will take up the axial force.
For smaller threads than M16 you must use reducing sleeves and reducing adapters for the squares.
|
|
Techniks quick change tapping products lower your overall costs by providing a quick way to produce threads.
This tapping system is the most productive in the world. Change taps and tap sizes in only 5 seconds.
|
|
|
|
|
|
Series KSN
The tap holders of our KSN series are designed especially for use in CNC machining centers, CNC turning machines and other machine tools. The tap holders type KSN/Softsynchro are mainly used in CNC machines with synchronous spindles, due to their special constructional design. Owing to the very different requirements a tap holder has to meet, the KSN series can be divided into the following six types:
KSN for conventional thread cutting, marked with a yellow ring on the shell.
KSN/IKZ(Z)/MMS for thread cutting operations with internal coolant supply and minimum quantity lubrication (MMS) up to 10 bar (140 psi), marked with a green ring on the shell.
KSN/HD for thread cutting operations with internal coolant supply up to 50 bar (700 psi); marked with a red ring on the shell.
KSN/ICS for thread cutting with control of the thread cutting cycle.
KSN/Synchro for thread cutting on machines with a synchronous control system, for tap clamping with steel collets.
KSN/Softsynchro By installing a minimum length compensation on compression and on tension, small pitch differences between spindle and tap which would lead to high friction forces on the thread flank are compensated. An eventual increase of axial force during the thread cutting cycle is reduced to a minimum.
|
|
|
Chumpower is a Taiwan Manufacture. We offer a complete range of Tapping Chuck. Such as DIN371,JIS,ISO for different systems and with or without torque tapping collet chuck. For detail information, please click the PDF catalogs and feel free to let us know your inquiries. We will send our reply mail as soon as possible.
|
|
WFLC-WFLC..K
Quick Change Tapping Chuck, available as a monobloc or modular version, for operation on mechanically and numerically controlled machines, manufacturing centres and FMS. Extremely smoothrunning length compensation and optimal initial cutting pressure even under the most difficult conditions.
: M3-M48
|
|
DSPL-D
Tapping Chuck with wide range double chucking head for tapping on reversible drilling, tapping and turning machines.
: M3-M42
TA../MK..
Self reversing tap holder for use on drilling machines which have only manual feed facilities and which do not have a reversible spindle.
: M3-M20
GNCN,GNCK
High performance tapping attachment with integral reversing gear for tapping applications in machining centres and FMS.
: M3-M20
|
|
| ... products without technical information |
| |
The HLT4500 is an industrial high power CO2 laser with an output power of 4500W and has integrated the best mode for sheet and plate cutting. Gas consumption is low as 20Nl/h and has a footprint of only 1600x1600x1600mm³. The laser is controlled by a Siemens controller equipped with standard teleservice via internet, is designed for ease of maintenance, the laser is standard delivered with integrated beam shaping optics for matching to the resonator and the application. This laser is the ideal source to be integrated on an excisting or a new laser machine or as stand alone unit for all kind of laser applications.
On top this laser equiped with highest standards for optical and electrical standards is economically low priced and has a world-wide after sales service back-up.
|
|
HLT3500 is a high-power, Class IV CO2 laser with a rated output power of 3500W and a maximum of 4kW. The laser radiation has a wavelength of 10.6mm and as such is invisible to the human eye. To facilitate alignment with external mirrors, a visible Class IIIA green laser diode pointer is standard and pre-aligned with the main beam. The visible beam is only present with closed shutter, and hence no accidents can occur since the main beam is always blocked when the pilot beam is visible.
|
|
|
The HLT8000 is in a design phase and will be optimised for maximum power. It has a single-layer, larger-bore resonator. It will be suited for high-speed, deep-penetration (keyhole) welding, cladding and laser surface treatment.
|
|
|
The HLT6000 is currently running reliability tests. It has a rated output power of 6kW and a maximum of 7200W. Due to its long, slim resonator it produces a low-order, high quality beam suitable for sheet and plate cutting. Attached to a high-dynamics machine, it can be used to exploit the advantages of increased processing speed in sheet metal. Alternatively, it can be interfaced to a large-area plate cutting machine.
|
|
|
|
|
|
Compact Series
Power and solutions at the service of the steel plate market
- Innovative laser resonator design with DCSS DOUBLE CINEMATIC SUPPORT SYSTEM
- Power up to 6000 W
- Modular power supplies
- Low operative costs
- Long maintenance intervals
- Flexibility of integration
- Single oil - free radial compressor
The new generation of laser resonators of the Compact series with powers up to 6 kW encloses the decades of experience of El.En. in the field of high power CO2 laser sources. The large range of powers available allows cutting and welding of high thickness metals, with high quality, high performances, high productivity and low operative costs.
Stability: innovative DCSS
DOUBLE CINEMATIC SUPPORT SYSTEM (PATENT PENDING)
The great thermo-mechanical stability of the El.En. laser resonator allows use in the most extreme industrial conditions. The innovative double cinematic support system guarantees total disjunction between the laser performances and the mechanical and thermo-mechanical movements of the chassis.
This patented solution gives to the resonator an exceptional stability and repeatability in long and short term.
Oil free radial compressors
The laser sources of the Compact series are equipped with oil free radial compressors that guarantee long maintenance intervals.
|
|
|
ROFINs well proven high-power CO2 lasers are always a good choice: whether cutting paper or welding gear wheels; the high availability, low service requirements, and excellent beam quality make ROFIN lasers an essential tool in any production environment.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
