|
|
BROADBAND AMPLIFIER
10 - 3000 MHz, 20 dB Gain, 13 dBm P1dB
Product ID: PE1513
FREQUENCY RANGE: 10 MHZ TO 3 GHz
GAIN: 14 dB (Min)
NOISE FIGURE: 2.7 dB (Min)
OUTPUT P1dB: 9 dBm (Min)
OPERATING VOLTAGE: 9 TO 15 VDC |
|
| The DSP Lock-In Amplifier provide high performance at a reasonable cost. The SR830 simultaneously displays the magnitude and phase of a signal, while the SR810 displays magnitude only. Both instruments use digital signal processing (DSP) to replace the demodulators, output filters, and amplifiers found in conventional lock-ins. The SR810 and SR830 provide uncompromised performance with an operating range of 1 mHz to 102 kHz and 100 dB of drift-free dynamic reserve. |
|
| The widest bandwidth lock-in amplifier available. It provides uncompromised performance with a frequency range of 25 kHz to 200 MHz and up to 80 dB of drift-free dynamic reserve. The SR844 includes the many features, ease of operation, and programmability that you've come to expect from SRS DSP lock-in amplifiers |
|
| Many measurement tasks in the field of industrial test benches and automatic production/assembly processes can be solved very simply and reliably with HBM industrial measurement amplifiers. Force, pressure, displacement and torque transducers based on different technologies can be connected to these analog and digital amplifiers. |
|
interface technology
The TURCK interface product portfolio comprises a large variety of devices for isolation, conversion, processing and conditioning of analogue signals.
The housing designs comply with industrial standards:
series interface module (IM) in modular housings
series multimodul (MK) in modular housings
series multisafe® (MS) in modular housings
series multicart® (MC) on 19’’ card
Interfacemodule Cartridge (IMC) series for the IP67 area
|
|
| The measuring amplifier with comparator outputs works as a DC amplifier for DMS measuring bridges. Three downstream comparators having one adjusting potentiometer each allow for the setting of three different switching thresholds that correspond to a certain load of connected DMS force transducer. Each comparator output controls one relay and one indicator LED. |
|
RF Amplifiers For Industrial Applications :
Every day, the uses and applications for AR Worldwide - Modular RF products in industries around the world grows. Whether used in RF testing and calibration, ultra-sonic inspection or materials analysis, all AR Worldwide - Modular RF amplifiers offer:
- High load tolerance
- Custom feedback loops
- Specialized configurations
- Fast time-to-market |
|
RF broadband power amplifiers rated at or above 10W continuous output are supplied by Credence Technologies, Inc.
Our RF Power amplifiers have fixed gain, low distortion with excellent stability over a wide range of VSWR.
|
|
The SM2325-53LD is a 2300-2500 MHz* LDMOS amplifier designed for multiple wireless communications and RF heating applications in medical devices.
Features
- Mis-Match Protected
- Single Power Supply
- Temperature Compensation
Options
- Forward/Reverse Power
Detection
- Logic On/Off Control
- Heatsink |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
Multi channel charge amplifier and thermocouple amplifier in an industrial housing. Consult data sheet for selecting the appropriate charge amplifier.
Applications
Integration into injection molding maschines for connecting piezoelectric cavity pressure sensors and temperature sensors for visualization and control. |
|
| The industry standard circulator for decades, Series 100 is still the one by which most others are judged. With well over 10 million units installed, the Series 100 remains a leader in applications such as hydronic heating and domestic hot water circulation. Series 100's three-piece, oil lubricated design provides for easy field service with bearings, shaft and seal all housed in an assembly which can be easily repaired or replaced. The Series 100 oil lubricated motor is specifically designed for the Series 100, and its resilient mounting provides quiet, dependable service with minimum annual lubrication. UL and CSA listings are standard. The design of this motor, coupled with its overall hydraulic performance, allows the Series 100 to overcome system related noise caused by valves, fittings, or piping. |
|
WILO booster pumps are installed as boosters for water supply and circulating systems.
They provide enough water pressure for high buildings, elevated parts of cities and municipalities as well as in industrial applications.
Booster pumps can be installed vertically, up to a certain number of stages, also horizontally. In case of vertical installation the space requirement of the pumping installation is very low, in case of horizontal installation the complete pipework is laid at one level |
|
| The BOGE Booster Compressor takes in pre-compressed and pre-treated compressed air from an existing network or from a low-pressure compressor and compresses it to the required final pressure. |
|
The LASERGAS nitrogen generator is a truly high range generator thanks to sophisticated technology and exceptional performance.
This unique gas generator is capable of producing nitrogen at very high pressure. It is available in various versions with different outputs, purity and pressure ratings.
The LASERGAS nitrogen generator can be used in any area of industry requiring a medium or high pressure nitrogen supply, or whenever intermittent demand requires large reserves of nitrogen to be kept ready for rapid consumption. |
|
The LASERGAS nitrogen generator is a truly high range generator thanks to sophisticated technology and exceptional performance.
This unique gas generator is capable of producing nitrogen at very high pressure. It is available in various versions with different outputs, purity and pressure ratings.
The LASERGAS nitrogen generator can be used in any area of industry requiring a medium or high pressure nitrogen supply, or whenever intermittent demand requires large reserves of nitrogen to be kept ready for rapid consumption. |
|
Pressure range up to 1250 bar / 18,000 psi
Suitable for Air, Nitrogen, Argon, Helium and a wide range of other gases
Provided with Resato air-driven single acting, double acting or two-stage gas booster
Water-cooled Oxygen boosters available
All stainless steel construction |
|
Digital Fiber Amplifier with Two Independent Outputs.
High speed 60 micro second response.
APC Function (Auto Power Control):
The APC function ensures precise sensing even when there are changes in the temperature or environmental conditions. |
|
The Photoelectric Amplifier series consists of a wide selection of single channel photoelectric amplifers which are to be used in conjunction with Telco's line of remote photoelectric sensors, that may be used in thru beam or diffuse proximity. A selection of the amplifiers provide high penetration power which are suitable for applications with contaminated environments. The series can achieve sensing ranges of over 70 m in thru beam and 5 m in diffuse proximity. All the photoelectric amplifiers are housed in enclosures with an 11-pole DIN socket connection.
Supply voltage can be selected between AC and/or DC, and the output can be selected between a transistor and/or relay output. The series offers a choice betweem automatic and/or manual sensitivity adjustment, with or without on/off time delay adjustment via integral potentiometers located on the front panels of the amplifiers. Light or dark function, and long and short range is switch selectable. A selection of the models offers sensor LED drives which powers optional monitor LEDs (power-on and output) available on the remote sensors. |
|
Referenos: AF CLARYS 2, 3, 4
Sensing distance with plastic fibre or glass fibre: see "Plaslic Optical Fibres' or "Glass Optcal Rbres
High resolution up to 5100th mm
2, 3, 4 channels + logical output AND/OR
Modeb: output P, output N
Optional: Analogical output
Smpfe feactvin: 1 or 2 thresholds
Timer OWOFF delay: 0 to 10s
Dimensions: 99x45x325 mm
Resolution 5/100th mm with 2000 points
Applications:
Level controls: high and bw
High precision detection of movement
Presence cdetection, up to 4 units simultaneously
Up to 4 beams barrier
Mark detection |
|
Order Code Z-SG
Input: analog sensor (strain gauge load cell); digital (weighting)
Output: current, 0..20 / 4..20 mA; voltage, 0..5 / 0..10 V
Precision: 0.01%
DIN guide back side bus connection and RS232
(ModBUS) front communication jack
ModBUS RTU slave protocol, half duplex
Converter for load cells, mounting guide Din 46277, isolated to 1500 V (input-output-power supply). The transducer acquire signals from load cells (6-wire) and transmits the value with analogue standard (mA / V) and serial (ModBUS Rtu) output. It accepts up to N. 4 load cells (350 ohms) and also has a contact that can be configured as alarm or weighing stable (weighing in motion).
Extremely fast (sampling frequency set by 12.53 Hz at 151.71 Hz), it measures with sensibility from 1 to 128mV / V, and also has remote reset tare via serial or digital input.
Ideal to be used for weight complex measures, result of the action of multiple cells in parallel or with moving loads.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
|