|
|
|
|
|
|
* 14 bit A/D + 16 bit digital with 50 MS/s
* Optimized for RADAR applications
* acquisition of azimuth and elevation angle
* 32 Bit 66 MHz PCI interface available
* PCI Express x1 interface available
* Up to 2 GSample memory
* 6 input ranges between ±200 mV and ±10 V
* Input offset up to ±200%
* Window/pulse width/re-arm/OR/AND trigger
* Automatic offset calibration
* Synchronisation to multi-board system possible
* Synchronous digital channels and ABA mode available as an option
The both cards of the M2i.40x8 series combine fast A/D data acquistion with the feature to acquire digital data in parallel. With this feature it is possible to either acquire 16 digital bit in parallel from one or more angle decoders or acquiring one or two encoder signals directly by using internal counters. Digital data is either stored continuously and synchronously with the analog data or as an angle marker with each data segment (Option Mutliple Recording needed).
Digital data can be either acquired fully in parallel or as a combination of a counter input and parallel digital data. The acquisition
mode can be programmed by software.
When operating in continuous mode the analog and digital data is stored alternating in the on-board memory. For each 14 bit analog sample there is one corresponding 16 bit digital sample.
When operating in segmented marker mode there is one 16 bit digital sample stored at the end of each acquired segment holding the azimuth
and elevation angle for this segment of analog data.
Acquisition can run with full sampling speed independant of the selected mode.
|
|
|
|
|
|
* 12 bit transient recorder
* 2 synchronous channels with seperate A/D
* 100 MS/s on 2 channels
* Up to 256 MSample memory
* 6 input ranges between ±200 mV and ±10 V
* FIFO mode up to 50 MS/s sum samplerate
* Input offset up to ±100%
* Automatic offset calibration
* Synchronisation to multi-board system possible
* 32 Bit CompactPCI 6U interface
* Compatible with 3,3V and 5V PCI I/O-Voltage
The MC.30xx series offer a wide range of very fast 12 bit A/D converter boards for CompactPCI 6U bus. Due to the well-planned design these boards are available in several versions and different speed grades. That makes it possible for the user to find a individual solution.
These boards offer one to four channels with a maximum sam-plerate of 200 MS/s. As an option 4 digital inputs per channel could be recorded synchronously. The installed memory of up to 256 MSample will be used for fast data recording. It can completely be used by the currently active channels. If using slower samplerates the memory is switched to a FIFO buffer and data will be transferred online to the PC memory or to hard disk.
Several boards of the MC.xxxx series may be connected together by the internal standard synchronisation bus to work with the same time base.
|
|
|
|
|
|
* 14 bit transient recorder
* Two channels with 250 MS/s
* High dynamic range
* 32 Bit 66 MHz PCI interface available
* PCI Express x1 interface available
* Up to 2 GSample memory
* 6 input ranges between ±100 mV and ±5 V
* 50 Ohm/1 MOhm, AC/DC, bandwidth filter software selectable
* Automatic on-board calibration
* Synchronisation to multi-board system possible
The 6 models of the M3i.41xx series are designed for the fast and high quality data acquisition. Each of the input channels has its own monolithic A/D converter and its own programmable input amplifier. This allows to record signals simultaneously on both channels with 14 bit resolution without any phase delay between them. The extremely large on-board memory allows long time recording even with the highest sampling rates. All boards of the M3i.41xx series may use the whole installed on-board memory for the currently activated number of channels. A FIFO mode is also integrated on the board. This allows the acquisition of data continuously for online processing or for data storage to hard disk.
|
|
|
|
|
|
* High-performance 8 bit transient recorder
* 4 simultanous channels with 100 MS/s
* 2 simultanous channels with 200 MS/s
* Systems up to 64 x 100 MS/s 8 bit A/D available
* 32 Bit 66 MHz PCI interface available
* PCI Express x1 interface available
* Up to 4 GSample memory
* 7 input ranges between ±50 mV and ±5 V
* Input offset up to ±400%
* Window/pulse width/re-arm/OR/AND trigger
* Automatic offset calibration
* Synchronisation to multi-board system possible
* ABA mode available as an option
The four models of the M2i.20xx series are designed for the fast and high quality data acquisition. Each of the up to four input channels has its own A/D converter and its own programmable input amplifier. This allows to record signals on all channels with 8 bit resolution without any phase delay between them. The inputs can be selected to one of seven input ranges by software and can be programmed to compensate an input offset of ±400% of the input range.
The extremely large on-board memory allows long time recording even with highest sampling rates. A FIFO mode is also integrated on the board. This allows to acquire data continuously for online processing in the PC or for data storage on hard disk.
|
|
|
|
|
|
* 14 bit transient recorder
* One channel with 400 MS/s
* Monolithic A/D converter (no interlace)
* Two channels with 250 MS/s
* High dynamic range
* Up to 2 GSample memory
* 6 input ranges between ±100 mV and ±5 V
* 50 Ohm/1 MOhm, AC/DC, bandwidth filter software selectable
* Automatic on-board calibration
* Synchronisation to multi-board system possible
* 32 Bit 66 MHz PCI/PCI-X interface available
* PCI Express x1 Interface available
The 6 models of the M3i.41xx series are designed for the fast and high quality data acquisition. Each of the input channels has its own monolithic A/D converter and its own programmable input amplifier. This allows to record signals simultaneously on both channels with 14 bit resolution without any phase delay between them. The extremely large on-board memory allows long time recording even with the highest sampling rates. All boards of the M3i.41xx series may use the whole installed on-board memory for the currently activated number of channels. A FIFO mode is also integrated on the board. This allows the acquisition of data continuously for online processing or for data storage to hard disk.
|
|
16 bits vertical resolution
• 2 or 4 digitizing channels
• 100 or 200 MS/s maximum sampling per channel
• 128 MS to 2 GS on-board acquisition memory
• 65 or 125 MHz bandwidth
• Full-size, single-slot PCI card
• Full-featured front-end, with software control with input ranges, coupling and impedances
• Input ranges between ±100 mV to ±50 V
• 32 bits, 66 MHz PCI standard for 200 MB/s transfer to PC memory
• Ease of integration with External or Reference Clock In and Clock Out, External Trigger In and Trigger Out
• Programming-free operation with GageScope® oscilloscope software
• Software Development Kits available for LabVIEW, MATLAB, C/C# and Linux
The RazorTM family of multi-channel digitizers features up to 4 channels in a single-slot PCI card with up to 200 MS/s sampling per channel, and up to 4 GB of on-board acquisition memory.
Combine several Razor cards for up to 32 channels in a single system.
For Realtime Applications eXpert Options:
• eXpert™ FIR Filtering Firmware Option
|
|
|
|
|
|
Fluke 225C et 215C – ScopeMeter couleur avec test de bus industriels
Les ScopeMeters couleur 225C et 215C offrent toute la palette de fonctionnalités des modèles 199C et 196C. Ils les enrichissent en outre de puissantes capacités de mesure dédiées au contrôle des bus industriels les plus répandus. En mode BusHealth, ces ScopeMeters soumettent automatiquement les signaux électriques véhiculés par le bus à une analyse approfondie. Les paramètres mesurés sont ensuite comparés aux valeurs normalisées prescrites pour le type du bus sous test. L'utilisateur peut aussi sélectionner l'affichage du « diagramme de l'œil » et contrôler visuellement la qualité globale du signal.
Les paramètres mesurés sont automatiquement définis comme « bons », « faibles » ou « mauvais » en fonction des normes correspondantes ou des valeurs de référence définies par l'utilisateur. Chaque paramètre est présenté avec sa valeur actuelle, accompagnée de statistiques MIN-MAX relevées dans le temps. Les valeurs de référence également indiquées aident l'utilisateur à cerner plus aisément le comportement du système. L'appareil mesure notamment l'amplitude des signaux, la tension de polarisation, les temps de montée et de descente, la gigue, la distorsion et les niveaux de bruit (bruit intra-bande et hors bande), selon les spécificités de la norme industrielle concernée.
|
|
|
|
|
|
1 digitizing channels
• 4 GS/s maximum sampling rate
• 8 bits vertical resolution
• 256 MS to 4 GS on-board acquisition memory
• 1.5 GHz bandwidth
• 7.6 bit ENOB
• Full-size, single-slot PCI card
• Full-featured front-end, with software selection of all signal conditioning settings
• 32 bits, 66 MHz PCI standard for 200 MB/s transfer to PC memory
• Ease of integration with Reference Clock In and Clock Out, External Trigger In and Trigger Event Out
• Programming-free operation with GageScope® oscilloscope software
• Software Development Kits available for LabVIEW, MATLAB, C/C# and more
The CobraMax CompuScope family of GaGe ultra high-speed 8-bit digitizers provides the most powerful combination of speed, memory, and bandwidth as well as a wide portfolio of advanced acquisition features.
The GaGe CobraMaxTM family of digitizers features up to 2 channels in a single-slot PCI card with up to 4 GS/s sampling per channel, and up to 4 GB of on-board acquisition memory. Combine several CobraMax cards for up to 16 simultaneous channels in a single system.
|
|
PicoScope handheld oscilloscopes convert your laptop or desktop PC into a powerful oscilloscope, spectrum analyzer and meter without the need for additional probes or power supplies.
The PicoScope 2104 and 2105 are portable handheld oscilloscopes that are ideally suited for use by hobbyists, students, technicians, and anyone looking for an easy-to-use, affordable, single-channel PC oscilloscope.
The small size of PicoScope handheld oscilloscopes makes them ideal for portable use, while still including the powerful features normally found in larger oscilloscopes.
* Ergonomically designed to fit in the hand
* Up to 100 MS/s real-time sample rate
* Up to 2 GS/s repetitive signal sample rate
* Up to 25 MHz bandwidth
* Up to 24,000 sample buffer memory
* Connected and powered by USB
|
|
Looking for something to replace that bulky benchtop oscilloscope?
A high-performance PC Oscilloscope from the PicoScope 5000 Series is your ideal choice.
As well as a 2-channel USB Oscilloscope, the PicoScope 5000 Series can also be used for high-speed data acquisition and includes an arbitrary waveform generator that can generate a waveform of almost any shape.
Other oscilloscopes at this price range force you to compromise on either bandwidth, sampling rate or buffer memory. With class-leading bandwidth, sampling rate and memory depth, and an array of advanced high end features, PicoScope 5000 PC Oscilloscopes give you the features and performance you need without compromise.
When performance is paramount, a PicoScope 5000 high-performance oscilloscope meets your needs.
* 250 MHz bandwidth
* 1 GS/s real-time sample rate
* 128 Megasample buffer memory
* Arbitrary waveform generator
|
|
| ... products without technical information |
| |
With its weight and size, resembling that of a small book, and featuring flexibility allowing you to position it horizontally, vertically or wall-mounted, the Desk Power range, 300 - 650 VA, represents an ideal solution to protect your information systems or PABX area with no disruption to customer premises.
The Desk Power family is available in 300, 500 and 650 VA and represents the most compact UPS product solution in the marketplace.
Its reduced size and weight allows easy integration into office environments. It can be placed virtually anywhere.
Desk Power comes with both RS232 and USB ports for flexible interaction between the UPS and the protected systems. In addition, it offers data line protection, securing internet and LAN connections.
Desk Power is fully compatible with Chloride’s Connectivity Solutions Suite. MopUPS Express software can be downloaded from the web for a safe system shutdown and UPS monitoring.
|
|
|
|
|
|
GE Digital Energy IT Series UL Listed UPS 600VA - 2kVA
Pure Sinewave Output, Line Interactive Tower and Rack Mounted UPS
The Digital Energy™ IT Series Rackmount and Tower UPS provide cost-effective, high quality power protection for a wide range of 19" Rackmount and Tower mount applications. The IT Series is a line interactive UPS that has pure sine wave output, which prevents downtime and equipment damage due to power outages, voltage fluctuations and transient surges. All GE Digital Energy™ IT Series UPS’s are microprocessor-controlled and equipped with AVR (Automatic Voltage Regulation), making them ideal for server, data storage, networking, telecommunications, and point-of-sale applications.
The units are equipped with RS-232, USB and additional communications slots for add-on accessory communications cards. GE offers a wide variety of SNMP and communication cards to enhance the communication capabilities of the IT Series.
All IT Series UPS’s utilize the GE IT Series MONITORing management and monitoring software. The IT Series MONITORing management and monitoring software has the capability to interface with all of today’s software operating system platforms. The front panel, multifunction audible alarms and set of six (6) LED’s allow for quick visual notification of UPS and battery status.
All IT Series UPS’s have hot swappable, user-replaceable batteries. The attractive design of the IT Series allows for front access, facilitating battery replacement. All GE IT Series UPS units come in an attractive, black color scheme and carry a (2) two-year product warranty.
|
|
|
The affordable, compact 3105 UPS system device was designed to deliver the best UPS power management solution for your small office or home office. Ready to switch to UPS battery power any time it detects a power problem within the utility, the 3105 UPS delivers reliable power quality and UPS backup power for wireless phones, small office PBX or key phone systems, home office workstations, small office desktop servers, small network nodes, point-of-sale systems, and computer peripheral devices.
|
|
... see all the products in the category
UPSs
|
|
|
|
|
Rflo-VC211L Electronic Volume Corrector
The VC211L™ is an advanced, high accuracy,
single stream flow computer specially designed to
meet the emerging requirements of gas
distribution utilities.
It defines a new standard for ease of use while
delivering unmatched levels of performance and
flexibility.
The VC211L incorporates wide range of features
which not only meets the local metering
requirements, but also provides a complete
solution for the gas distribution utilities to achieve
fast, efficient and cost effective network operation
and management.
• Approved by NMI for legal metrology
• EN 12405 compliant
• AGA 5, AGA 7, AGA 8, GERG
• ISO 6976 calculations
• Complies with ISO 12213-3
• Certified for use in hazardous locations
• F l e x i b l e gas chromatograph connection
• Remote upload/download of gas information
• 1 year history of Vm, Vc, Vb, M, E, P and T
• Hierarchical alarm and early warning structure
• 64 bit normal and disturbed accumulators
• Min, max, average data storage
• Multi level data safety and security
• Connects to all common turbine types
• Dual high and low pulse inputs
• AGA 7 compliant meter correction
• Allows direct NAMUR sensor connection
• System-wide distribution of gas information
• 4 communication ports
• 1 isolated RS232/RS485
• port for remote connections
• MODBUS master and slave support
• Easy access thru Internet
• Local and remote configuration
• and programming software
• 32 bit RISC based high performance design
• AGA 8 detailed calculations in 30 msec
• Expandable memory
• High isolation, precision I/O
• 24 bit analog input resolution
|
|
|
|
|
|
VC211LL is a durable, maintenance-free, advanced electronic volume
corrector specially designed for applications where power and
communication lines are costly or unavailable.
With its battery powered design and its embedded communications
interface, it meets all types of volume correction and reporting needs
without any maintenance for at least 5 years.
Embedded GSM hardware enables wide area coverage with various
operators worldwide.VC211LL supports GPRS and EDGE, for reporting,
remote access, configuration, and transmission of control commands.
Approved for Legal MetrologyVC211L™ has compatible gas measurements for EN 12405 which is approved by Holland NMI. This approval includes that the product is fully functional and suitable for hard environments.
Broad Calculation RangeMain calculation standards are AGA 5, AGA 7, AGA 8, GERG, ISO 6976 and ISO 12213-3 which include mass, energy, volume, density, calorific value, relative density and compressibility values.
Pipeline MonitoringVC211LL can be used for monitoring critical pipelines, supplying majority of gas to the cities and to prevent seller from loss of money due to different pressure, tempreature and gas content.
Key Customer MonitoringVC211LL is ideal for monitoring, logging and reporting of various parameters of key customers of gas utilities which consume majority of gas such as hospitals, hotels, factories, and industrial zones.
|
|
The Nova-Flow Series of flow computers is a family of highly flexible, modular flow computers designed for
basic rate and total flow display, batch control for liquid and gas flow measurement, as well as for
thermal energy measurement. With more than 500,000 unique configurations possible, the potential
applications for these devices is almost limitless.
|
|
|
|
|
|
The lightning fast Thermo Scientific AutoEXEC flow computer and remote telemetry unit integrates measurement and control functionality for both natural gas and petroleum liquids. This highly accurate hybrid system efficiently calculates flow on four to 32 runs at an unprecedented rate of 10 times per second. It features unsurpassed expandability, USB connectivity and security, giving users unbeatable flexibility and functionality.
Powered by a 32-bit processor, the AutoEXEC natural gas and petroleum liquids flow computer operates at greater than 300 million instructions per second (MIPS), making it the fastest flow computer on the market today. This computational speed, in combination with its 32-bit floating point capabilities, give the system unequalled power. It solves complicated AGA and API equations rapidly and accurately on up to 32 runs simultaneously.
The AutoEXEC features:
- A preloaded default configuration
- USB connectivity via three ports: host, slave-device and on-the-go (OTG)
- Secure access controls, authentication and built-in encryption.
- Built-in lightning protection on each board.
- A processor that operates at the widest temperature range in the industry: -40 C (-40 F) to 85 C (185 F).
- AO accuracies of ±0.1% over the full temperature range.
The standard AutoEXEC includes a CPU board, power supply and an enclosure with six available board slots. Optional boards can be added to increase input/output as necessary and each board has its own 32-bit ARM 7 industrial grade processor, enabling the most rapid communication to the motherboard.
|
|
The flowcom compensates for flowmeter errors due to pressure or temperature variations and computes mass or standard volume flow rates for gases, steam or liquids. It can even do so for a pair monitoring stations. It also computes heat transfer rates and thermal-energy contents for heat transfer media or refrigerants.
As a two channel version, the flowcom can calculate balances between supply and return lines.
A particular advantage of the flowcom: It does not operate based on problematic equations, but integrates a number of permanently stored tables of the mass densities and enthalpies of commonly employed media.
Flowcom will compensate the infloence of temperature and pressure on virtually each flowmeter such as integrating pitot tubes, orifices, venturis, vortex meters, mag meters, ultrasonic flowmeters, PD-meters…
The flowcom communications software runs under Windows.
|
|
|
With more than a quarter of a million units in operation, in applications around the world, Cameron is the undeniable leader in the design and manufacture of totalizers and flow analyzers. The NuFlo MC Family of Flow Analyzers delivers a broad range of functionality and capability from the straightforward MC-II Totalizer, which provides rate and flow, to the MC-III EXP Flow Analyzer, which utilizes Modbus® communications to download extensive archival logs in less than a minute. The MC Family of Flow Analyzers is ideal for use with Cameron's comprehensive line of turbine meters and performs equally well with all turbine brands on the market today.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
