|
|
| IPTE develops test equipment, test handlers and turn-key solutions for the automation of testing and adjustments of PCB's and electronic products |
|
ATE QT2256-320PXI system is designed as a Combination Board Tester capable of testing highly complex and dense PCBs employing various test techniques on a single platform.
It can perform Board Level Functional Test through edge connectors of a PCB, and guided probe diagnostics utility to reliably repair Digital/Analog and Mixed Signal PCBs of various complexities for conventional PCBs.
It is an In-Circuit Device / cluster tester when High Current Pin Driver options are installed and interfaced to the UUT either through clips / probes or nail bed. Standard configuration is 64 Channels high current Pin Drivers.
It has in-built 20MHz 12bit Analog Driver / sensors synchronized with digital drivers for covering analog / mixed signal devices.
Integrated Boundary Scan Test controller (Up to 4 Chains) and software package can be used to test today’s PCBs with high density / high pin count devices. Uses latest technology Boundary Scan hardware with RAM based drivers / sensors in synchronization with ATE digital and analog pin drivers.
To effectively test CPU based boards without excluding the CPU from the test, the system offers optional Qmax patented Bus Cycle Signature System. |
|
| ... products without technical information |
| |
SMD FUSES FF 470
The Bussmann SMD Tron is designed to EIA-PD-100, DWG SOPM-7243.
A high temperature body material is capable of surviving a 60 second exposure to a temperature of 215°C. Because the SMD Tron is totally sealed, it can be subjected to cleaning by a wide variety of aggressive solvents.
PICOFUSES PF 257
The PF 257 fuses are designed to safely interrupt 50A at 125V ac. This excellent performance is achieved at power factors as low as 97%. Competitive components claim similar short circuit interrupting ratings, but at 100% power factor - a condition that rarely exists in real world applications. In addition PF 257 fuses are capable of interrupting a 300A fault at 125V.
MICROFUSES FF 785
At 250V ac, the 0.5 to 3A PC-TRON can safely interrupt 50A; at 125V ac, the 0.5 to 5A versions can interrupt 10.000A.
This high breaking capacity makes the PC-TRON subminiature fuse ideal for line-side protection of power supplies.
CYLINDRICAL FUSES CT 515
5x15mm glass fuses are available with axial leads. The fuse is available with an optional sleeve of flexible fluoropolymer (UL flammability rating VW-1). The tube will self-extinguish within one minute. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
The XC31B series are ultra small CMOS temperature sensor ICs. As a bandgap type temperature sensor is built-into the
XC31B, linearity, in comparison to thermistor type temperature sensors, is much better.
The operating temperature range of the series is from -30°c to +80°c.
The XC31B comes in a mini molded SOT-25 and
USP-6B packages with a supply current of only 7µA
(@VOUT=2.0V) and as such, is suitable for use with various portable devices. Output voltage is selectable in 100mV
increments within a range of 2.0V to 6.0V (at 25°c). |
|
The automation of odd-form component placement is economically justified when a variety of components need to be placed at high production rates. The flexibility of our equipment provides the automation capability of odd-form components even for variable batch sizes and a number of different component shapes to be placed.
|
|
Board level, or PCB-mountable pressure sensors use piezoresistive silicon die technology and are suitable for air or non-corrosive gases for pressure ranges from 1 to 500 PSI. Board level sensors are used for medical applications, air flow, HVAC, leak detection and other test and industrial applications.
|
|
Model 101A
General purpose ICP® pressure sensor, 100 psi, 50 mV/psi, 3/8-24 mtg thd with Jamb Nut, ground isolated
Measurement Range: (for ±5V output) 100 psi (689 kPa)
Sensitivity: (±10mV/kPa) 50 mV/psi (7.3 mV/kPa)
Low Frequency Response: (-5%) 0.5 Hz
Resonant Frequency: >=250 kHz
Electrical Connector: 10-32 Coaxial Jack
Weight: 0.39 oz (11 gm)
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
- PCB Mountable
- Starting Voltage up to 3000 Vrms
- Boost Current Operation for Cold Starts
- For High Pressure Automotive Type Lamps
- Fully Encapsulated for Resistance to Shock, Vibration and Humidity
- Operating Range of -30 to +85 C
- External Control and PWM Dimming |
|
| With the integrated capture, simulation and layout environment of the National Instruments Circuit Design Suite, engineers have a complete PCB design and validation environment. With the integration with NI LabVIEW, measurements can be easily introduced into the design flow, with simulation results improved with real-world data (a concept called virtual prototyping), and the transfer of simulation data to the test environment to compare real vs. theoretical. |
|
* 30 Series Sub-miniature D.I.L. Relays 1.25 A.
* 32 Series Miniature P.C.B. Relays 6 A
* 34 Series Ultra-slim, P.C.B. Relays 6 A
* 34 Series Ultra-slim, P.C.B. Relays 0.1 - 2 A
* 36 Series Miniature P.C.B. Relays 10 A
* 40 Series Miniature P.C.B. Relays 8 - 10 - 16 A.
* 41 Series Low-Profile P.C.B. Relays 8 - 12 - 16 A.
* 43 Series Low-Profile P.C.B. Relays 10 A.
* 44 Series Miniature P.C.B. Relays 6 -10 A.
* 45 Series Miniature PCB Relays 16 A.
|
|
... see all the products in the category
Relays
|
| Very compact EMI suppression components can directly be mounted on printed circuit boards of low-power office, medical, telecom and IT equipment, DC/DC converters and power supplies etc. Ideal low cost solution for manufacturers who have planned for EMC compliance throughout the equipment design process already. |
|
|
