|
|
|
IPTE develops test equipment, test handlers and turn-key solutions for the automation of testing and adjustments of PCB's and electronic products
|
|
Features
Integrated test system
Compact footprint
Fixtures compatible with TCIL-P and TCIL-TS
Compact PLC for internal controls
Visualization and tester interface on external PC (e.g. tester PC) via USB interface
Stand alone operation
Manual width adjustment
SMEMA Interface
Compatibility with all standard test systems
Options
Product specific fixtures
ESD covers
Safety automatic door
|
|
|
SIM-Small Instrumentation Modules-is a compact test and measurement platform for a wide range of applications. Unlike other modular systems, SIM offers complete front-panel as well as remote operation, allowing you to choose between manual and computer control. Up to eight instruments share the same mainframe which provides power, clock synchronization, communications, and module status. For additional versatility, you can cascade mainframes or other RS-232 instruments, and even operate modules outside the mainframe.
|
|
|
|
|
|
The GX1110 is a high performance, single-channel PXI arbitrary waveform generator that offers function generator and arbitrary waveform generator functionality within one instrument. Built-in waveforms are available for use with both the DDS or AWG modes of operation and include Sine, Triangle, Ramp, Noise, Gaussian pulse and Sinx/x. A flexible sequencer is also available as part of the AWG's architecture, supporting the generation of complex waveforms.
The GX1200/1201 is a single-channel PXI-based Arbitrary Waveform Generator. The GX1200/1201 is a high performance waveform generator that combines many powerful functions in one small package.
The GX1200/1201 is a single-channel PXI-based Arbitrary Waveform Generator. The GX1200/1201 is a high performance waveform generator that combines many powerful functions in one small package.
The GC1300 is a single-channel PCI-based Arbitrary Waveform Generator. It is a high performance waveform generator that combines many powerful functions in one small package. Supplied free with the instrument is Arbconnection software, which is used for controlling the GC1300 and for generating, editing and downloading waveforms from a remote computer.
|
|
The GP1616H function generator is a programmable instrument capable of generating predefined Sine, Square, Triangle, Ramp, Haversine, Haver triangle and Pulse waveforms as well as a programmable DC output. The firmware is customized to be fully compatible with the Hewlett Packard 8116A GPIB command set. Software test procedures using the original HP8116A instrument require no code modification when upgrading to the GP1616H.
|
|
The GP1550 series features:
- pulse widths from 10nS to 10S
- delays from 0nS to 10S with up to 6-digits resolution.
- Output levels are from -10V to +10V, with pulse amplitudes from 0.5V to 10Vp-p into a 50 Ohm load.
The GP1612H features:
- variable pulse widths from 10 ns to 10 s,
- delays from 0 ns to 10 s with up to 6 digits resolution
- adjustable output levels from -8V to +8V, with pulse amplitudes from .1V to 16Vp-p into 50 ohms load (.2V to 32Vp-p into open circuit).
These Pulse Generators also feature selectable complementary pulse and double pulse, in continuous, triggered, gated and counted burst modes.
They allow selection of predefined amplitude and offset for critical stimulus and testing of major semiconductor technologies as TTL, CMOS and ECL.
|
|
|
The GC1300 is a single-channel PCI-based Arbitrary Waveform Generator. It is a high performance waveform generator that combines many powerful functions in one small package. Supplied free with the instrument is Arbconnection software, which is used for controlling the GC1300 and for generating, editing and downloading waveforms from a remote computer.
|
|
The GTX22x0 family of universal time interval counters provides all the features of stand-alone counters in PXI form factor. There are three versions of the PXI counters, GTX2210, GTX2220 and GTX2230. The GTX2210 support frequency range up to 225MHz, the GTX2220 to 1.3GHz and the GTX2230 covers frequencies up to 2GHz.
The GTX22x0 series counters have two signal input channels via BNC connectors, an external timebase, arm input, and a gate signal output. The separate input signals can be used for Arming and Gating the circuitry, and controlling the timing of the analysis (start/stop duration) for more meaningful measurements.
The GTX22x0 series counters are universal in that they provide many measurement functions of other frequency counters, including frequency, period, and time interval. The GTX22x0 series also have event counting and timing functions over a single channel, such as totalize and ratio between channels.
|
|
|
|
|
|
The ETA-GT II geometrical tester is a compact measurement system for all stages of disc manufacture - including stamper verification, half-disc and bonded discs.
It enables all relevant geometrical data to be determined, including the inner hole and the lead-in and lead-out diameter. The disc tray permits measurement of disc eccentricity relative to the inner groove (lead-in) as well as to the outer groove (leadout). With its easy-to-use, intuitive user interface, it provides a graphic representation of accuracy for measured geometrical data such as eccentricity, unroundness and layer shift of optical
discs or stampers.
While the ETA GT II serves CD as well as DVD, the ETAGT II / Blue provides one measurement system for all formats CD/DVD/BD.
KEY BENEFITS
- Geometrical tester for all stages of disc manufacture,
from stamper verification to molded CD or half discs to
bonded DVD and BD (optional)
- Measuring all cases: Prerecorded, recordable and
rewritable
- Ready for Blu-Ray single and dual layer discs (ETA-GT II
/ Blue)
- ETA-GT II (CD/DVD) upgradable to ETA-GT II / Blue
(CD/DVD/BD)
- Evaluation of eccentricity and unroundness
- Layer shift evaluation for dual-layer DVDs and BDs
- Evaluation of inner hole, plus inner and outer groove
diameter
- Indicator axes for adjustements to compensate eccentricity
|
|
|
|
|
|
The MicroDock II is the world’s most advanced, compact and affordable automatic calibration, testing and data management system for portable gas detection equipment. Compatible with BW’s GasAlertMicro 5, GasAlertMicro 5 PID, GasAlertMicro, GasAlertMicroClip, GasAlert Extreme and GasAlertClip Extreme family, the MicroDock II is expandable to up to 10 docking modules (including up to 6 charging units).
- Fully automatic “hands-free” calibration & functional bump test
- Automatically verifies performance of audible and visual alarms
- No computer required
- Entirely self-contained
- Fully portable
- Lightweight and mobile
- Operates via line power or a set of four C-cell batteries
- Add additional self-contained docking modules to system via simple, plug-in connections-no external pressure transducers or gas lines necessary
- Simplify record keeping
-Verify proper performance
- Reduce maintenance costs
- Multiple MicroDock II systems can be connected via a LAN
- Multi-language support in English, French, German, Spanish, and Portuguese
|
|
The new CheckBox IMH automates the routine gas (bump) testing, calibration and management of Crowcon portable gas detectors and facilitates the traceability and routine maintenance of instruments. Capable of operating with up to 10 instrument interfaces, CheckBOx IMH is available for use with the Tetra, Triple Plus Plus and Gasman products.
* Automatic gas (bump) testing
* Automatic calibration
* Can use single gases or quad mixtures
* Up to eight gas inlets
* Five or ten instrument interfaces
* Accommodates pumped or non pumped instruments
* Data and event file uploading
* Stores and controls configurations
* Records all activities
* Provides reports and certificates
|
|
The DS2 Docking Station provides the ultimate flexibility for managing your gas monitors wherever you use them. The DS2 gives you all of the benefits of consistent automated calibration, record keeping, battery recharging and instrument diagnostics for your monitors to limit your liabilities and safety hazards. Two way wireless and/or ethernet connectivity enables you to link up to 100 stand-alone Instrument Docking Stations (IDSs) from remote locations anywhere in your facility and relay the data back to one central database for total instrument management. A graphical user interface tool (DSSAC) allows an administrator to view operations on each Docking Station from a network computer, making it easy to track instruments, print reports, set events and change parameters for any location.
|
|
GasCal 1100 Gas Dilution Calibrator
The Ecotech GasCal 1100 Gas Dilution Calibrator performs precise
gas dilution calibrations, ozone analyser precision checks and gas
phase titrations using an optional internal ozone generator. It is
ideal for stand alone use or incorporation into ambient air or emissions
monitoring systems.
• Single and multipoint calibrations can be performed using precise mass flow controllers
• Perform gas phase titrations (U.S. EPA Method) and ozone precision checks using an internal ozone generator (option)
• Parameter setup and output via inbuilt LCD and keypad or an external PC
• External remote control possible via data acquisition system or suitable gas analyser
• Mass flow controller zero stability drift less than 0.6 % full scale per year
• Optional Carry case allowing the GasCal-1100 to be securely carried from location to location
• Optional purge facilitates flushing of calibration gas lines
|
|
The wide range of specimen preparation machines provides complete solutions for fast and correct use of the material testing instruments in plastic and metal fields.
These devices are designed and realized to meet needs of flexible and compact solutions that can be easily integrated in the laboratories.
|
|
|
|
|
|
What if you could maintain and manage your fixedpoint gas monitor fleet without leaving your desk?
The advantages would be significant. Manually calibrating every fixed monitor in a facility is a time consuming distraction from your core business. The units may be in hard-to-reach places creating additional safety hazards. These and other obstacles make it difficult to follow industry best practices for routine testing and calibration.
iTrans™ DS2 Docking Station™ is the first system to automate calibration, record-keeping and instrument
diagnostics for fixed-point gas monitors. Hands-off maintenance and a snapshot view of your entire gas
monitor fleet allow you to:
• Maintain your gas monitors more safely, efficiently and reliably
• Increase equipment reliability
• Eliminate safety concerns
• Save money on calibration and testing
• Focus more resources toward your core business
A graphical user interface tool allows an administrator to view operations on each Docking Station from a network computer. From here, you can initiate calibrations and instrument tests remotely, print reports, set events, and run diagnostics for any or all instruments at any location.
The DS2’s flexible architecture minimizes installation costs, whether you’re managing one instrument or an entire fleet of fixed-mounted or portable instruments.
|
|
Rack Mounting Applications
* The high I/O systems are ideal for rack mounting applications
* Can be used on a Vertical Hinged Mounting Frame to access wiring and instrumentation
* Time saving with rapid changeover
Pre-Wired InterConnect Adapters
* Pre-wired InterConnect adapters act as a compact funnel for wiring directly to VXI cards
* Plug the connectors on the back of the funnel to the VXI card and the test system is ready to use
* Different connector plates are available to cable out of the InterConnect Adapters
Standard ITA’s
* Buy our ITA’s with our standard enclosures, or attach them to your custom enclosure
* Guaranteed a precise fit to VPC receivers
* Have us customize our enclosure to fit your testing needs
Easy Wiring with Cable Assemblies
* Combine our VXI Pre-wired InterConnect Adapters with cable assemblies to have the most rapid setup time
* Cable Assemblies can be created by VPC based on your testing instrumentation needs
* Standard cables are also available
|
|
Block Heaters
A block heater provides a source of precise heating for many sensitive analytical procedures. Through choice of block, a wide variety of tubes and vessels can be accommodated in a standard unit.
The Stuart range of block heaters are available in two or three block versions and dual control models, where two blocks can be held at independent temperatures. Digital models are available in 130°C or 200°C versions, with an analogue 130°C version also available. For users who are looking to improve the speed of sample concentration, the Stuart sample concentrator is available, where a gas chamber delivers an inert gas into the sample tubes to reduce vapour concentration in the tube and encourage evaporation.
|
|
The Atlas Weather Station, an outdoor instrument, is ideal for customers who have their own test site. The new Weather Station can be used to map various geographical climates.
Customers can choose from a range of sensor specifications including rain gauge, wind speed & direction, temperature, humidity and total solar radiation. Customers may also customize their Atlas Weather Station with a black panel.
The Atlas Weather Station is available in three options:
Option A
Includes the Weather Station support mount, a UV and global radiometer, data collection capabilities and remote solar power
Option B
Includes Option A plus a temperature and humidity probe
Option C
Custom made per specified requirements
|
|
|
|
|
|
The Atlas LS-200 Full Spectrum Monitoring device helps customers show objective evidence that they are in compliance with test specifications during ISO 17025 quality audits. The LS-200 has been specifically designed for use in Ci Series Weather-Ometers® to precisely measure the SPD output of the xenon lamp. Validation tests have shown that this device has excellent correlation to the spectroradiometers used in the Atlas Calibration Laboratory.
"With the advent of performance-based standards which identify the spectral power distribution and not specific filter combinations, users have had no way to verify that they are actually meeting the test method they are running," says Matthew McGreer, Product Manager for Atlas Material Testing Technology. "The LS-200 will allow our customers to now do that simply and more affordably than has ever been available in the past."
The device is easily mounted on the specimen rack, and the output is measured over a short amount of time (30 minutes is sufficient). The data can be downloaded and exported into a common spreadsheet program and analyzed to quickly and easily determine compliance to the performance-based standard you are running.
There is no need to retrofit the device for older Ci Series instruments. The LS-200 works with any generation of Weather-Ometer. For labs that may not have the resources to purchase the
device, Atlas' Technical Service group offers measurement of your instruments, in addition to normal preventive maintenance and calibration services.
Atlas is planning to adapt the LS-200 device to be used in any Atlas xenon weathering instrument, including the Xenotest® and SUNTEST® lines.
|
|
The Atlas Weather Station, an outdoor instrument, is ideal for customers who have their own test site. The new Weather Station can be used to map various geographical climates.
Customers can choose from a range of sensor specifications including rain gauge, wind speed & direction, temperature, humidity and total solar radiation. Customers may also customize their Atlas Weather Station with a black panel.
The Atlas Weather Station is available in three options:
Option A
Includes the Weather Station support mount, a UV and global radiometer, data collection capabilities and remote solar power
Option B
Includes Option A plus a temperature and humidity probe
Option C
Custom made per specified requirements
|
|
The V-Lap F6 is standard equipped with a range of grinding and centre plates for grinding and lapping any type and size of ‘flat’ seat up to 6” / DN150 mm. The centre plate keeps the grinding plate in position, but also gives an eccentric rotation ensuring constant and complete coverage and absolute flatness.
Abrasives
The V-Lap F6 is completed with a large consumer quantity of polyester based, self-adhesive Aluminum Oxide round foil tips in grains rough, middle and fine. The foil tips can be used dry and on all common seat materials.
Drive machine
The V-Lap F6 is standard equipped with a battery drive machine and is delivered with 2 battery’s. The low weight and good balance of the machine increases the grinding performance and makes it easier to attain high quality flat ‘results’.
The complete set is packed in a robust, but light weight carrying case.
|
|
|
|
|
|
PORTABLE GRINDING AND LAPPING MACHINE FOR GATE-, PARALLEL SLIDE-, CHECK- & GLOBE VALVES 4 – 40” / DN100 – 1000 mm.
The ORBIT 24 is a robust, but light weight grinding and lapping machine for ‘in-situ’ or ‘in-shop’ repair of damaged valve seats. The unique set up and construction makes the versatile ORBIT 24 suitable for all sorts vertical seats (Gate-, Parallel slide-, Check Valves) and horizontal mounted seats (Globe-& Safety valves) in the range 4 – 40”
GATE- & PARALLEL SLIDE VALVES
The ORBIT 24 is suitable and equipped for grind¬ing and lapping the faces on both the Gate valve seats and wedge. Both seats inside the valve body are quickly machined in one setting of the mounting bracket. The standard included Gate valve wedge bracket allows you to accurately machine both faces of the wedge.
GLOBE AND SAFETY VALVES
Within seconds the ORBIT 24 is prepared for machining the flat seats of both Gate-, Parrallel Slide, Globe and Safe¬ty valves. The ball – joint construction in the arm ensures a very easy alignment and accurate control of the force.
|
|
|
|
|
|
* USBscope50 is a tiny PC based oscilloscope which connects via the USB port, combining the ease of use, portability and economy of PC based scopes with high performance normally associated with much larger bench oscilloscopes.
* USBwave12 is a new concept in USB function generator products. PC based function generators offer many user benefits including flexibility, ease of use and economy.
The USB interface has developed into probably the best and most widely implemented PC peripheral connection method and is a natural choice for the function generator.
* USBpulse100 is a new concept in USB Digital Pulse/Clock Generator products. PC based pulse generators deliver many user benefits including flexibility, ease of use and economy. They are an invaluable tool during design and debug of digital circuits and can be used to quickly test the behaviour of a circuit under different input frequency and duty cycle conditions.
* USBcount50 is a PC based frequency counter designed for maximum flexibility, ease of use and economy. It is an invaluable tool during design and debug of digital circuits and can be used to quickly to verify generated frequencies, pulse widths and duty cycles.
|
|
The Schmidt Roll Hardness Tester determines the hardness of large rolls of paper, film and foil. It provides fast, accurate, non-destructive hardness profiles of rolls to assure smooth and efficient printing. Rolls that are too hard, or too soft, rolls that are unevenly wound, or rolls with different moisture contents can cause difficulties during the printing process. The Schmidt Roll Hardness Tester is often used in conjunction with the Smith Roll Tightness Tester (TMI 40-54-00) to provide a complete profile of roll properties.
FEATURES
- Self-contained, Lightweight, Portable, Quick Readings
- A convenient carrying case provides safe, easy transport of these portable, lightweight units and accessories.
|
|
IEDScout is a universal client to IEC 61850 servers - such as substation IEDs - and a publisher/subscriber for GOOSE messages. It provides numerous useful functions needed in the substation or the laboratory.
As an IEC 61850 client it supports many functions, from generic reading/writing of data attributes to using the self description of the IED and producing SCL files from it. It detects GOOSE messages on the network and monitors them. The IEDScout also simulates GOOSE messages. With IEDScout, the protection engineer has new options to enhance the depth and quality of testing.
Applications
- Testing
- Troubleshooting
- Commissioning
- IED Development
Download a free evaluation version on www.omicron.at
|
|
|
The Seraphin skid prover system is made up of a precision volumetric stainless steel Prover connected to a pump-off system and mounted on skid. The prover drain valve is plumbed to piping that can be routed via butterfly valves to a gravity drain or to the pump. A manual hose reel, with hose and nozzle, is connected to the pump. The hose is used to route the petroleum to an above ground storage tank or up into a tank truck.
|
|
|
Designed to slip easily into the bed of a pick-up truck, Seraphin® Slip-On Volumetric Calibration Unit can speed the job of calibrating multiple fuel dispensing units, while at the same time, enhancing safety. The unit consists of three 5 gallon or 20 liter NIST compliant bottom drain provers individually plumbed to 80 gallon stainless steel transfer tanks. The 80 gallon configuration allows for up to 48 calibration tests before returning to the fuel station's storage tank for dumping.
|
|
Description
The GX7600 Series mainframes are compact, 9-slot PXI chassis that can accommodate up to 8 instruments as well as an embedded single slot PXI Express controller such as the GX7940 or a PXI Express external bus controller such as the x1 or x4 MXI - PXI Express interface. The GX7600’s compact 3U form-factor occupies only 9x18 inches of bench space, making it ideal for benchtop or space constrained applications. And when combined with 8 peripheral slots, integral Smart functions, and the bandwidth of PXI Express, the GX7600 represents a new level of performance, capabilities and value for PXI mainframes.
|
|
Description
The GX3500 is a user configurable FPGA 3U PXI card which offers 160 digital I/O signals for specific application needs. The card employs the Altera Cyclone III FPGA which can support clock rates up to 150 MHz and features over 55,000 logic elements and 2.34 Mb of memory. The GX3500 can also accept an expansion card assembly which can be used to customize the interface to the UUT – eliminating the need for additional external boards which are cumbersome and physically difficult to integrate into a test system. The design of the FPGA is done by using Altera’s free Quartus II Web Edition tool set. Once the user has compiled the FPGA design, the image can be loaded into the FPGA via the PXI bus interface or via an on-board EEROM.
|
|
|
|