|
|
|
Industrial Engines power a variety of off-highway equipment in the Agricultural Specialty, Construction & Forestry and Material Handling markets.
|
|
|
The Funk™ TeamMate II inboard planetary axles are rated at a peak vertical load (per axle) of up to 88,000 lb. (40,000 kg). We're committed to adding value to your equipment and giving you a competitive edge.
|
|
These are the characteristics of the TCD 2012:
Modern water cooled 4- and 6-cylinder in-line engines
Turbocharging with charge air cooler
Robust engine with high power density
Power take-off options integrated into the gear drive
Electronic engine control with intelligent adaptation to drive management
High-pressure fuel injection with DEUTZ common rail system (DCR®)
4-cylinder optional with mechanical injection system up to 88 kW
|
|
Magnalube-G has a variety of applications and is truly designed for use in any situation. The high quality of Magnalube-G is never wasted on an application that may typically require lower-grade grease. The energy savings and machine part protection that arise in sensitive applications are not lost in other applications. Here is a list of a few of the many applications that Magnalube is specially designed for:
Gears, Bearings & Jack Screws
Actuators
Brake Calipers
Computer Components
Construction Equipment
Railroad Couplings
Die-casting Machines
Electric Motors
Electric Switches
Gaskets
Hydraulic Equipment
Laser Equipment
Medical Devices
Mold Release
Office Business Machines
Pneumatic Cylinders
Pumps
Railroad Engines
Seals, Valves & Gaskets
Tools
Trucks & Trailers
Valves
|
|
Leica RedLine
The future of construction positioning
From office to field and back again the new RedlLine product range has the perfect solution for all your construction site design and positioning needs: The unique modular system design allows the same sensors to be used across the entire construction site
* Design and data manipulation
* Control establishment
* Base Station set-up (or use network corrections)
* GNSS rover solutions (set-out and as-built surveys)
* GNSS foreman car/quad navigation
* GNSS machine control (more machines covered)
* Tracker machine control (more machines covered)
* Total station surveys (set-out and as-built surveys, one man, two man options available)
All controlled by the same simple user interface designed specifically with the construction site in mind.
|
|
Modern, high performance vehicles, machines, devices and engines require filters and components with a correspondingly high performance.
The documentation presented here will give you an overview of our air cleaners and the respective accessories – all having the renowned
MANN+HUMMEL OEM quality. Since our customers operate in many varied fields, such as
• construction machines
• agricultural machines
• compressors
• mechanical engineering
• engines and gear units
• commercial and customised vehicles, etc.
MANN+HUMMEL has extensive experience elaborating individual concepts and solutions for your special field of application.
|
|
|
|
|
|
When our construction customers said that they wanted smaller, quieter, more powerful engines for micro and mini designs we brought them 400 Series. The range has been specifically tailored to micro / mini-excavators, skid steer applications, and the smaller sized dump trucks. For the top end of these smaller machines the 800 Series brings the same refinement, but adds more power.
The 1100 Series family of engines provides an engine platform that caters for different emissions legislation in world markets. The 1100A is suitable in non-regulated markets, the 1100D for Tier 3 / Stage IIIA legislation, and the 1100C range satisfying Tier 2 / Stage II. This approach makes life much simpler for manufacturers who wish to sell globally without spiralling re-engineering costs.
1100 Series contains models that can be tailored to Telehandlers, Large dumper trucks, Backhoe loaders and Wheeled or tracked excavators. Similar envelope size, mounting points, fuel, coolant, electrical and gaseous connection positions means a more efficient, lower cost design and installation process for equipment manufacturers. All the important end user benefits of improved NVH, cost of ownership, and productivity are maintained.
|
|
Custom-built heat exchanging solutions
AKG project manages and manufactures custom-built building machinery for a mul-titude of applications and operational conditions, from front-end loaders via hydraulic excavators to tunnel driving machines.
There are system solutions based on single coolers and cooler combinations, in compact constructions, powerful, in individual, application specific optimized designs.
Products
Water-coolers
Coolant-coolers
Charge air-coolers
Fuel-coolers
Hydraulic oil-coolers
Gearbox oil-coolers
Engine oil-coolers
Lubrication oil-coolers
Coolant media-coolers
|
|
Concrete mixers and moving machines use oil cooler
cooling power:6-12kw
oil volume flow:20-80L/m
12V or 24V DC
complete set with fan,shroud and guard.
oil sealing,filter and thermo switch enclosed.
|
|
Looking for a large selection of diamond bits with worldwide service and supply? Then look no further.
Atlas Copco sells Craelius and Hobic, two of the most famous bit names in the world. The two names - with different product profiles, specialties and features - cover all the diamond tools you need for whatever type of core drilling you're doing.
Atlas Copco has these two separate product lines, to respect customer requirements for different technical solutions and the specific traditions that the two names represent.
|
|
Atlas Copco offers a wide range of Down-The-Hole hammers
for any application in the range of 3' to 8' diameter hammer size.
COP34, COP44, COP54, COP64, COP84L, COP84
Working pressure: 6-25 bar (85-360 psi)
Hole/Bit dimension: 95-254 mm (3 3/4' - 10')
COP32, COP42
Working pressure: 6-12 bar (85-175 psi)
Hole/Bit dimension: 85-130 mm (3 3/8' - 5 1/8')
|
|
| ... products without technical information |
| |
- Handy EDM head
- Extended internal memory (max.50000 points)
- High accuracy and long measuring range
- Complete application programs
- Convenient data management system
- Electronic auto compensator
- Long-time working battery
- Superior waterproof and dustproof
- Laser centering and laser directing
- Reflectorless distance measurement available
|
|
|
|
|
|
Leica TPS400 Series - easy, quick, reliable
The TPS400 is specifically designed for the construction site. They are very easy to use and impress by a high level of functionality. It requires minimum time to learn operating the TPS400.
The optimized concept with simplified operational procedures sets new standards. Now with the new TCR400ultra versions reflectorless measurements up to more than 1000 m are possible.
Classes of accuracy: 3", 5", 7"
To meet your individual requirements
Software that runs onboard the TPS400 instruments:
Survey with coding
Tie Distance
Free-station / Resection / Orientation
Hidden_Point
Area (3D), Volume
Target Offset
Reference Line
Construction
Stake-out
Height Transfer
Hidden Point
Auto-start Routine
Remote Height
Cogo
direct.dxf
With Direct.dxf functionality, data can be read directly from the instrument in dxf-format and read into AutoCAD® on a PC without any intermediate steps. Coordinates and point numbers can be stored in different layers.
Theft protection
The PIN-code feature prevent unauthorized persons from using the instrument. This increases your data security. Without correct code, the equipment cannot be operated, data erased and makes it unattractive to steal. This protects you from having damages, increases your safety and possibly low-ers your insurance rates.
Multilingual function
Does your crew speak different languages? Ours does.The Leica TPS400 is the only instrument of its class with multiple languages onboard.
|
|
Leica RedLine
The future of construction positioning
From office to field and back again the new RedlLine product range has the perfect solution for all your construction site design and positioning needs: The unique modular system design allows the same sensors to be used across the entire construction site
* Design and data manipulation
* Control establishment
* Base Station set-up (or use network corrections)
* GNSS rover solutions (set-out and as-built surveys)
* GNSS foreman car/quad navigation
* GNSS machine control (more machines covered)
* Tracker machine control (more machines covered)
* Total station surveys (set-out and as-built surveys, one man, two man options available)
All controlled by the same simple user interface designed specifically with the construction site in mind.
|
|
|
|
|
|
The Leica GPS900 uses Leica Geosystems’ proven GPS technology. Consisting of a Leica RX900c Color Controller and a Leica ATX900 GG GNSS Antenna the all-on-the-pole GPS900 RTK rover is ideal for one-person stakeout and topographic tasks.
With its flexible, easy-to-use onboard software, Leica GPS900 is the ideal solution for a wide range of jobs including foundation and drainage work, alignment stakeout, topographic and as-built surveys. For the one-man-team, Leica GPS900 is easy to setup and use.
Control/Reference Line
Stakeout and measure relative to lines and arcs. Enter offsets and heights. Control/Reference lines can be defined using the map-view. Set checks for quality control. Ideal for buildings, drainage, foundations etc.
Stakeout
Stakeout points and digital terrain models (DTMs) with the stakeout program. Navigate directly using the map-view or using the large bull’s-eye.
Topographic Survey
Record points with or without code and attribute information. Set criteria and measure points automatically. View the survey in the large, graphical map-view display. Use the Survey program for detail, topo, title surveys etc.
Alignment
Stakeout relative to a 3D alignment using the RoadRunner option. Points can be staked out at any chainage (stationing) and offset. Work with any combination of geometric elements.
Easy-to-use
The Leica GPS900 is easy to use. The GPS900 rover is lightweight and optimised to reduce operator fatigue. The icon-based, graphical onboard software can be easily operated using the ¼ VGA touchscreen. Import and export functionality allows the instrument to be compatible with Leica TPS400, Leica TPS800 and System 1200 TPS and GPS.
|
|
Sokkia's construction total stations bring you everything you need. The required applications, lightweight and compact body design and easy operation of the instrument.
It's up to the user to select the right model selecting between reflectorless or non-reflectorless models and/or simple or full alpha-numeric keyboards. Do you need illuminated keyboards or even a wireless keyboard? Wireless data communication with Bluetooth wireless technology? Sokkia can offer everything you.
All Sokkia reflectorless total stations feature the unique RED-tech EDM, the best and most accurate distance meter in the surveying industry. RED-tech stands for high-accurate pinpoint distance measurement using laser light.
For more information, visit the Sokkia website.
|
|
|
|
|
|
Simply Rugged, Simply Accurate, Simply Trimble: Trimble M3 Total Station
The Trimble® M3 mechanical total station combines tough construction with practical hardware and software functionality. When you arrive on the job site, just pull the Trimble® M3 Total Station out of its ruggedized case and get to work. This rugged and reliable mechanical total station delivers fast, accurate measurments whatever the conditions.
The Trimble M3 Total Station is also extremely easy to use. Its intuitive software and workflow mean your crew won't lose time and productivity on a steep learning curve.
By the Surveyors at Trimble for Surveyors Like You
Only a surveyor knows what a surveyor needs. And at Trimble, qualified surveyors develop products they know will help surveying professionals like you get the job done ... every time. So when you're investing in a total station, Trimble is the name you can trust. The Trimble M3 Total Station gives you access to Trimble's long reputation in developing the highest quality surveying instruments. And our 24/7 worldwide support means you're never alone; the surveyors at Trimble are ready to lend a hand whenever you need it.
|
|
The Trimble® SPS710 and SPS610 Robotic Total Stations help contractors perform layout tasks significantly more efficiently than with conventional mechanical systems for residential and building construction. Designed specifically for concrete and general construction contractors, the Trimble SPS710 and SPS610 total stations offer construction-specific functionality and one-person operation so you can perform all jobsite layout and measurement tasks for maximum flexibility and cost savings.
Applications:
* Layout of control
* Checking or typing into property boundaries
* Layout of excavation lines
* Layout of concrete forms and anchor
* As-built checks
* Layout of control lines on concrete paid for subcontractor
* Light topographical measurements
|
|
|
The Sokkia Series 30R Reflectorless Total Station is able to do pinpoint, high accuracy measurements at locations that are difficult to reach. Measurements to corners of objects, high-voltage electricity wires and a building face survey are examples of the precision this series can offer, all with the convenience of Bluetooth wireless technology.
|
|
|
|
|
|
MIKROFYN 3D
- Machine Guidance
In short – a MIKROFYN Machine Control and 3D Guidance System will improve your productivity.
It will ensure a more accurate and faster working procedure.
This will result in fever mistakes and reduction of the subsequent costly corrective actions. You will experience that downtime is reduced considerably, that survey costs will drop and that your productivity and best off all – your profit will be significantly improved.
All MIKROFYN Machine Control Systems are prepared for adding on a 3D guidance system comprising a rugged computer, 3D modeling software and 3D positioning of the machine by either RTK GPS or a robotic total station. The modular design of all MIKROFYN Machine Control Systems will enable the user to move a 3D guidance system between different machines, equipped with any MIKROFYN Machine Control System.
A MIKROFYN Machine Control System provides control with the highest possible accuracy. In combination with a 3D guidance system you will gain absolute control of the machine position and attitude in all three dimensions.
|
|
|
|
|
|
The robust Trimble LR400 receiver combined with the GL700 transmitter is designed specifically for earthmoving applications performed with larger machines like dozers, scrapers and excavators. The receiver features center on-grade for use with dozers and scrapers and an "excavator mode" for use with excavators and backhoes. Using the excavator mode, more above-grade information is displayed making it easier for the operator to lower the bucket and cut to the correct grade.
Features & Benefits:
-Large LED display arrows indicate "high" or "low" with amber lights and "on-grade" with green lights so the operator can quickly and easily move the cutting edge to a desired elevation, especially on larger machines such as excavators, dozers and scrapers, for improved productivity.
-Adjustable accuracy bandwidths and distinct modes for specific applications and equipment provide flexibility to meet the machine needs and the accuracy requirements of the job.
-Selectable "on-grade" location and accuracy indicators provide improved efficiency and allow customization of the receiver to each unique application.
-Rugged, waterproof magnesium housing withstands tough jobsite conditions.
-Powered using its own battery or using the machine's battery.
Applications:
Site prep
Building pads
Sewage and storm drains
Landfill sites
Balancing materials
|
|
Mikrofyn Laser Receivers
A laser receiver system consists of two primary components - a rotation laser and a laser receiver mounted on the machine. MIKROFYN offers just the right receiver for your needs, and they are all very simple to operate.
The MD 40 and MD 10 Laser Receivers can be combined with our various Machine Control systems.
In a number of countries we can also deliver the MD 3 Laser Receiver, which features plum indicators for increased accuracy.
|
|
The RL-H3A/H3B series is rotating lasers that inherit the features of RL-HA/HB which enjoyed a high reputation because of accurate detection of control positions by automatic leveling, waterproof design and other features. The new series features reinforced basic performance and functions.
Horizontal accuracy particularly is boosted to ±8″ for RL-H3A and ±10″ for RL-H3B for more reliable leveling in interior finishing work, architecture, construction and civil engineering. A higher work efficiency is assured when level sensors are used.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
