|
|
|
Industrial Engines power a variety of off-highway equipment in the Agricultural Specialty, Construction & Forestry and Material Handling markets.
|
|
|
The Funk™ TeamMate II inboard planetary axles are rated at a peak vertical load (per axle) of up to 88,000 lb. (40,000 kg). We're committed to adding value to your equipment and giving you a competitive edge.
|
|
These are the characteristics of the TCD 2012:
Modern water cooled 4- and 6-cylinder in-line engines
Turbocharging with charge air cooler
Robust engine with high power density
Power take-off options integrated into the gear drive
Electronic engine control with intelligent adaptation to drive management
High-pressure fuel injection with DEUTZ common rail system (DCR®)
4-cylinder optional with mechanical injection system up to 88 kW
|
|
Magnalube-G has a variety of applications and is truly designed for use in any situation. The high quality of Magnalube-G is never wasted on an application that may typically require lower-grade grease. The energy savings and machine part protection that arise in sensitive applications are not lost in other applications. Here is a list of a few of the many applications that Magnalube is specially designed for:
Gears, Bearings & Jack Screws
Actuators
Brake Calipers
Computer Components
Construction Equipment
Railroad Couplings
Die-casting Machines
Electric Motors
Electric Switches
Gaskets
Hydraulic Equipment
Laser Equipment
Medical Devices
Mold Release
Office Business Machines
Pneumatic Cylinders
Pumps
Railroad Engines
Seals, Valves & Gaskets
Tools
Trucks & Trailers
Valves
|
|
Leica RedLine
The future of construction positioning
From office to field and back again the new RedlLine product range has the perfect solution for all your construction site design and positioning needs: The unique modular system design allows the same sensors to be used across the entire construction site
* Design and data manipulation
* Control establishment
* Base Station set-up (or use network corrections)
* GNSS rover solutions (set-out and as-built surveys)
* GNSS foreman car/quad navigation
* GNSS machine control (more machines covered)
* Tracker machine control (more machines covered)
* Total station surveys (set-out and as-built surveys, one man, two man options available)
All controlled by the same simple user interface designed specifically with the construction site in mind.
|
|
Modern, high performance vehicles, machines, devices and engines require filters and components with a correspondingly high performance.
The documentation presented here will give you an overview of our air cleaners and the respective accessories – all having the renowned
MANN+HUMMEL OEM quality. Since our customers operate in many varied fields, such as
• construction machines
• agricultural machines
• compressors
• mechanical engineering
• engines and gear units
• commercial and customised vehicles, etc.
MANN+HUMMEL has extensive experience elaborating individual concepts and solutions for your special field of application.
|
|
|
|
|
|
When our construction customers said that they wanted smaller, quieter, more powerful engines for micro and mini designs we brought them 400 Series. The range has been specifically tailored to micro / mini-excavators, skid steer applications, and the smaller sized dump trucks. For the top end of these smaller machines the 800 Series brings the same refinement, but adds more power.
The 1100 Series family of engines provides an engine platform that caters for different emissions legislation in world markets. The 1100A is suitable in non-regulated markets, the 1100D for Tier 3 / Stage IIIA legislation, and the 1100C range satisfying Tier 2 / Stage II. This approach makes life much simpler for manufacturers who wish to sell globally without spiralling re-engineering costs.
1100 Series contains models that can be tailored to Telehandlers, Large dumper trucks, Backhoe loaders and Wheeled or tracked excavators. Similar envelope size, mounting points, fuel, coolant, electrical and gaseous connection positions means a more efficient, lower cost design and installation process for equipment manufacturers. All the important end user benefits of improved NVH, cost of ownership, and productivity are maintained.
|
|
Custom-built heat exchanging solutions
AKG project manages and manufactures custom-built building machinery for a mul-titude of applications and operational conditions, from front-end loaders via hydraulic excavators to tunnel driving machines.
There are system solutions based on single coolers and cooler combinations, in compact constructions, powerful, in individual, application specific optimized designs.
Products
Water-coolers
Coolant-coolers
Charge air-coolers
Fuel-coolers
Hydraulic oil-coolers
Gearbox oil-coolers
Engine oil-coolers
Lubrication oil-coolers
Coolant media-coolers
|
|
Concrete mixers and moving machines use oil cooler
cooling power:6-12kw
oil volume flow:20-80L/m
12V or 24V DC
complete set with fan,shroud and guard.
oil sealing,filter and thermo switch enclosed.
|
|
Looking for a large selection of diamond bits with worldwide service and supply? Then look no further.
Atlas Copco sells Craelius and Hobic, two of the most famous bit names in the world. The two names - with different product profiles, specialties and features - cover all the diamond tools you need for whatever type of core drilling you're doing.
Atlas Copco has these two separate product lines, to respect customer requirements for different technical solutions and the specific traditions that the two names represent.
|
|
Atlas Copco offers a wide range of Down-The-Hole hammers
for any application in the range of 3' to 8' diameter hammer size.
COP34, COP44, COP54, COP64, COP84L, COP84
Working pressure: 6-25 bar (85-360 psi)
Hole/Bit dimension: 95-254 mm (3 3/4' - 10')
COP32, COP42
Working pressure: 6-12 bar (85-175 psi)
Hole/Bit dimension: 85-130 mm (3 3/8' - 5 1/8')
|
|
| ... products without technical information |
| |
The RAM Structural System is the only fully integrated engineering software solution with complete building analysis, design and drafting for BOTH steel and concrete structures!
The RAM/Revit link provides users with the flexibility to work with 3rd party applications.
You can watch a short demo of the link and get the RAM/Revit link for free from the Bentley Structural Team, just contact us!
|
|
|
|
|
|
A comprehensive and integrated finite element analysis and design solution, including a state-of-the-art user interface, visualization tools, and international design codes. Capable of analyzing any structure exposed to a dynamic response, soil-structure interaction, or wind, earthquake, and moving loads.
STAAD.Pro is the premier FEM analysis and design tool for any type of project including towers, culverts, plants, bridges, stadiums, and marine structures. With an array of advanced analysis capabilities including linear static, response spectra, time history, cable, and pushover and non-linear analyses, STAAD.Pro provides your engineering team with a scalable solution that will meet the demands of your project every time.
STAAD.Pro will eliminate the countless man-hours required to properly load your structure by automating the forces caused by wind, earthquakes, snow, or vehicles.
In addition, no matter what material you are using or what country you are designing your structure in, STAAD.Pro can easily accommodate your design and loading requirements, including US, European (including the Eurocodes), Nordic, Indian, and Asian codes; even special codes like AASHTO, ASCE 52, IBC and the US aluminum code can be catered to.
|
|
|
|
|
|
3Muri is a program for analysis of structures in masonry and mixed materials through a non-linear (pushover) and static analysis.
The strengths of 3Muri is its innovative computation method (FME) that is able to give more information on the structure's real behaviour to seismic actions, aside an extreme simplicity of use.
3Muri offers a drawing area for insertion of the structure with intuitive controls, an engine for the creation of computation models and their solutions, and a post-processor for immediate presentation of the results and creation of the computation report.
3Muri: directly from the most advanced research.
3Muri was created by a joint project of S.T.A. DATA and the research group headed by Professor Sergio Lagomarsino, from the Construction Technique department of Genova University.
Along with other specialists (eng. Andrea Penna and eng. Alessandro Galasco from Pavia's Eucentre, and eng. Serena Cattari, Genova University) they finalized the theoretical aspects of 3Muri through laboratory's experiments and analysis on real structures.
That continuous collaboration guarantee an always updated software, completely operative and reliable for the most professional requirement.
|
|
The architecture of the Mercator solution
Mercator acts as an assembly and output engine to any GIS, CAD or even DTP system or combination of these.
Setting up a Mercator workflow happens as follows:
- Design your map symbology interactively in a true WYSIWIG environment (What You See Is What You Get)
- Determine normalization rules for the GIS and/or CAD data sources.
* Scale
* Position
* Object reclassification
* Geometric adjustments
* Etc.
- Determine handling rules for DTP and raster data.
* Size
* Position
* Ink handling
* Cleaning
* Etc.
- Compile a soft or hard copy proof for final approval of workflow results.
- Determine the preferred output settings. By default this will be a PDF. If desired CMYK, RGB, Bitmap or greyscale TIFF images can also be created.
|
|
|
|
|
|
The RAM Structural System is the only fully integrated engineering software solution with complete building analysis, design and drafting for BOTH steel and concrete structures!
The RAM Structural System was developed with one goal in mind: to help structural engineers produce better designs, faster. By providing powerful tools that are automated, integrated, and a complete alternative to traditional design methods, the RAM Structural System has accomplished this goal.
The RAM Structural System is currently increasing the productivity of thousands of engineers worldwide in the design of a wide variety of institutional, commercial, retail, residential and industrial building structures, from one story buildings to some of the tallest structures in the world.
Used by thousands of design firms, steel fabricators, educators, and others; from one-person firms to some of the largest E&C companies in the world, the RAM Structural System is helping to redefine how engineers work!
Unlike most structural software packages that solve only specific and isolated problems, the RAM Structural System is a fully integrated solution. It enhances your work every step of the way, integrating gravity and lateral analysis and design with the creation of detailed and usable CAD drawings.
|
|
STAAD.offshore Tools:
- Wave Loading
- Transportation Loading
- API Code Checkin
Specific benefits to the design of offshore steel structures when using STAAD.offshore:
Full library of standard section profiles, user tables and section property calculator.
Staad.offshore waveload calculator.
Staad.offshore transportation inertia loading.
Static, elastic, seismic and dynamic analysis.
STAAD.Pro meets the rigid requirements of NUPIC/NRC by conforming to the 10CFR PART 50, Appendix B, Section II: "Quality Assurance Program" and ASME NQA-a-2000 (QA requirements for nuclear facility applications) standards.
|
|
|
|
|
|
Bentley Architecture is an advanced, yet intuitive and easy-to-use architectural building information modeling (BIM) application that empowers architects and designers to create with unlimited freedom, to explore more design options, to make better informed design decisions, and to predict costs and performance. Design and construction documents are automatically coordinated, eliminating errors and omissions. So, architectural and AE firms can deliver better buildings on time and on budget, thus improving client services and increasing revenue – business-critical benefits in today’s competitive environment.
Unlike stand-alone architectural applications offered by most vendors, Bentley Architecture is part of Bentley's integrated suite of Building Information Modeling (BIM) applications that provide seamless integration between design, engineering, analysis, construction, and operations for the entire lifecycle of facilities. Used by the world’s leading architectural, engineering, and construction companies on the largest and most complex projects, this unique solution supports multi-disciplinary workgroups and global teams in a managed environment, allowing them to build as one.
|
|
|
|
|
|
Bentley speedikon Architectural is a fast, powerful, and integrated Building Information Modeling (BIM) application for building design and construction documentation of new and existing structures of any size and complexity, such as offices, airports, hospitals, and manufacturing plants.
Task-oriented functionality supports all project phases, from building design to input of as-built data, from detailed construction documentation and quantity take-off with export to tender documentation applications to photo-realistic design visualization.
Available for MicroStation and AutoCAD as well as a stand-alone program for Windows with a virtually identical user interface, Bentley speedikon Architectural is based on the concept of a 3D building model (BIM) with intelligent construction elements, with an option to work in 2D or 3D. At the touch of a button, floor plans, sections, and elevations at different scales and different depth of detail can be generated using the unique speedikon display filter® technology. Supporting a multi-discipline project environment, Bentley speedikon Architectural also allows the creation of information for facility management.
|
|
|
|
|
|
AutoCAD® Architecture software, the version of AutoCAD® software created for architects, supports a faster way of working. Purpose-built features for architectural design and drafting help you create construction documents more efficiently within the familiar AutoCAD environment.
Overview
Up and Running, Right Away
AutoCAD® Architecture software provides AutoCAD-based design and documentation productivity specifically for architects. You now have more tools to automate drafting tasks and create your architectural documentation faster.
- Designed specifically for architects-Work in the familiar AutoCAD environment, using tools that are purpose-built for architectural design and drafting.
- Get immediate productivity-Begin using AutoCAD Architecture software with minimal training, creating documentation, drawings, and schedules faster, with fewer errors, and in a software environment you already know. Make a smooth transition to more advanced features at your own pace.
- Collaborate smoothly-Exchange information easily using the industry-leading DWG™ file format, and use integrated rendering tools to create lifelike design visualizations that enhance communication with clients.
|
|
Bentley’s ProSteel v18 is a 3D modeling environment for structural steel and metal work supporting your construction and planning tasks.
Working on both MicroStation and AutoCAD platforms, you get an intuitive and integrated multi-material modeler perfectly suited to layout complex structures, produce shop drawings, assemble all your connections and manage your bill of materials.
From initial planning and design to assembly, ProSteel is a comprehensive software built by engineers experienced with steel design. Our many years of experience in the field of AutoCAD development and the close contact with our users has contributed to ProSteel becoming an internationally recognized and important application for 3D structural steel and metal work.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
