|
|
ENVIRO WASH a fountain of degreasing which combines the properties of a powerful solution of cleaning of neutral pH and the principle of biological breakdown of the organic stains.
It makes it possible to regenerate the grease-remover uninterrupted by transforming oils and greases into water and CO2 by the action of bacteria of class 1.
This concept relieves the stresses of management relating to the use of solvents
Moreover, ENVIRO WASH contributes to the reduction of the emissions of COV in the atmosphere
ENVIRO WASH is voted by plebiscite by the largest actors of industry: manufacturers and subcontractors car, leaders of aeronautics, the plasturgie, agro-alimentary,...
|
|
|
Modern plastic producers spend ever-increasing amounts of money on more and more complicated tooling which still has to be cleaned to maintain product quality. Techne approached this problem some years ago and now have a range of equipment designed to remove unwanted material from production hardware without damage to the part(s) being cleaned. The Fluidised Bath is a thermal process that degrades plastic residues to carbon and comes away from the bath as CO2. This fast cleaning process enable costly machinery to be put back into production with the minimum delay. Baths operate from a factory air supply or if required inert gases such as nitrogen, full range of fume treatment apparatus is available.
|
|
The Platinen-Cleaner Evomat 05
cleans blanks, tailored blanks, moulded blanks or aluminium blanks before the infeed into a press line.
The Evomat is a Cleaner that is placed on a chassis that also serves as an oil and debris collector. The Cleaner will effectively remove particles that damage the surfaces during the deep-drawing and the pressing processes. It will not degrease the surface. However, the wiping movement of the linear brushes will homogenise the basic grease layer on the blanks' surfaces.
Due to its narrow footprint and the possibility to adapt to different transport speeds, the Evomat Cleaner may also be integrated into existing press lines. It is available in different working widths.
The initial and maintenance costs of an Evomat Cleaner are considerably lower than the respective costs of a traditional washing machine.
|
|
Cleaning machine GTR
for pre- and fine cleaning
effective aspiration
feed roll for uniform product distribution
robust and quiet running eccentric drive
|
|
ROTARY BLOWING AND FEEDING TABLE SA1200
The standard ROTARY BLOWING TABLE SA1200 is provided with:
- Stainless steel feeding plate for placing of bottles.
- Stainless steel rotary plate that transfers the bottles to a vertical star wheel for cleaning operations. It includes a stainless steel plate on which the operators loads the bottles.
- Star wheel with horizontal axe that handles the bottles during the cleaning operation. During the wheel rotation a set of special nozzles blow filtered compressed air in the bottles.
- Automatic discharge of the bottles.
- Safety guards with interlock micro-switches at doors.
- Strong and solid stainless steel machine frame, adjustable in height and provided of feet with pads and caster wheels.
- Driving group with adjustable speed.
- Electrical plant and suitable controls.
- Filtered compressed air circuit for internal bottle cleaning. It includes a filter housing made of stainless steel and cartridge filter.
|
|
|
|
|
|
The Mistral Series of blowing tables are suitable for the dry cleaning of bottles and containers that do not need cleaning with water or detergents but rather the removal of solid granular or dusty solids by a sterile air jet.
The Series includes machines from medium to high speed capacity, up to 340 pcs/min.
The MISTRAL X12 blowing table is designed for the dry cleaning of sample tubes and at the same time it performs the function of feeding the containers to downstream machines or to a complete processing line.
Output up to 120 pcs/min.
MISTRAL Y16/Y20 models feature a particular blowing cycle due to the possibility of placing the containers upside down with the mouth fit on the suction bushings.
During the continuous turret rotation, blowing needles are inserted into the overturned containers, while the suction bushings, coaxial with the needles, close off the mouth and allow the immediate withdrawal of air and impurities.
The blowing action is intermittent, in order to obtain a more thorough cleaning.
MISTRAL Y16 can reach an output of up to 250 pcs/min while MISTRAL Y20 reaches a speed of 417 pcs/min.
MAIN CHARACTERISTICS
- Automatic in-feed system from bulk for plastic bottles
- Automatic feeding systems from turning table or hopper loading for unstable containers
- Possibility of applying cleaning and simultaneous suction of impurities to any type of cylindrical containers, either glass or plastic
|
|
| ... products without technical information |
| |
Biochrom Anthos Fluido 2 Microplate Washer
The Fluido 2 microplate washer combines ease of use and excellent performance for both absorbance based and luminescence based assay procedures.
Superb wash performance with a minimum residual volume of less than 1 µl/well. The built-in software is easy to use and has 20 different cycles, 50 diferent procedures and can run many different plate types.
-Two manifolds come as standard.
-Quiet operation- no noisy vacuum pump.
-Built in safety features include aerosol protection and emergency stop.
-3 different manifolds (wash heads) available 8, 12 way for 96 well plates and 16 way for 384 well plates.
-Two configurations of liquid lines are avalable allowing users to use two or four bottles- ideal for applications requiring up to 4 wash buffers.
-Optional liquid level sensors and warnings.
Excellent washing performance, quiet operation, reliability and attractive pricing make the Fluido2 an ideal choice for Enzyme Immuno Assay (EIA) applications.
|
|
|
|
|
|
Biochrom Asys Atlantis Microplate Washer
The Atlantis microplate washer combines ease of use and excellent performance for both absorbance based and luminescence based assay procedures.
Superb wash performance with a minimum residual volume of less than 1.5 µl/well. The built-in software is easy to use and has 20 different cycles, 50 diferent procedures and can run many different plate types.
-Two manifolds as standard.
-Quiet operation- no noisy vacuum pump.
-Built in safety features include aerosol protection and emergency stop.
-3 different manifolds (wash heads) available 8, 12 way for 96 well plates and 16 way for 384 well plates.
-Two configurations of liquid lines are avalable, Atlantis 2 allows users to use two bottles and Atlantis 4 is ideal for applications requiring up to 4 wash buffers.
-Optional liquid level sensors.
-Optional extra manifold
The Atlantis is a reliable microplate washer designed for laboratories running microplate based applications such as ELISA and requiring a quiet efficient solution to washing microplates.
See www.biochrom.co.uk for a video demonstration.
|
|
HeoloS industrial suction units of the HSE series are suitable for the suction of all kinds of fluids and emulsions; thanks to the reversed flow system, standard on the entire HeoloS range, it is possible to discharge the sucked fluids in just a few seconds.
The filtering unit is effectively protected by a laminar structure, with tangential inserts which means that only the dusts touch the cartridge filter.
The HSE series is fitted with an elimination unit through which, after the reverse of flow, it is possible to quickly and safely empty out the large 100 liter tank.
The stainless steel structure, standard on the entire HeoloS range, is an extremely important feature, because in the long term, the frequent contact with fluids does not lead to corrosion.
|
|
| ... products without technical information |
| |
|
|
|
|
The Anthos Instant Microplate Solution (AIMS) from Biochrom contains ALL the microplate instrumentation you need to run ELISA and other microplate based applications, in a single package, at a great price. It is ideal for laboratories that handle a large number of absorbance based assays that also need flexibility for future techniques. AIMS includes:
The Anthos Zenyth 200st Microplate Reader with cuvette UV/Vis spectrophotometer. A versatile monochromator based instrument that reads 6-384 well plates at any wavelength between 190-1000nm, with temperature control. The built-in spectrophotometer saves bench space, and there are pre-programmed cuvette methods for nucleic acid and protein measurements.
The Anthos Fluido 2 four channel microplate washer handles up to four different wash buffers, up to 50 different programs and 20 different plate types-including strip plates and round bottom wells.
In addition, the AIMS package contains ADAP Prisma PC analysis software and a laser printer free of charge.
AIMS includes the “top of the range” Anthos microplate instrumentation and software. All Anthos instruments are designed to give reliable results in busy multi-user laboratories for many years.They are CE marked and manufactured under a rigorous quality system.
Building on Anthos’ 25 years experience in microplate instrumentation, AIMS represents new thinking for the next generation providing total flexibility for microplate absorbance applications.
|
|
Destined for use by those professionals with very low cleaning frequency or intensity such as single employee tradesmen, or the smallest farms for occasional cleaning of equipment and vehicles, the POSEIDON 1 offers an attractive price, great compact design – and yet the quality and versatility of true professional spray equipment.
The POSEIDON 1 stands for:
• Great compact design
• Cleaning performance
• Unbeatable ergonomics
• Versatility of true professional spray equipment
The POSEIDON 1-20 XT comes equipped with versatile and easy to use
professional equipment:
• 15m DN6 hose
• Flexopower lance with high and low pressure functions
• Tornado Plus nozzle
• Turbohammer lance
• Ergo 1000 spray gun incl. hose swivel
|
|
Mazzoni’s range of cold water high pressure washers includes machines from 7 to 21 lts / min and from 120 to 200 bar.
For these machines the offer is particularly addressed to professional users but you even could find some commercial and hobby models.
This line includes a stainless steel fixed station with dampner that can be easily used for the cleaning of hard and large surfaces especially in the food industry.
Four models of petrol engine units with motor Honda and electric or manual starting complete this range of products.
Professional pumps and elastic coupling always complete our high pressure washers.
|
|
|
|
|
|
The Nilfisk-ALTO NEPTUNE range spans the compact to the very heavy duty lines and is fit for any imaginable application in automotive, industry or agriculture. Even the most compact units offer the customer the benefit of some of the most powerful innovations on the market.
The NEPTUNE 2 is the newest offering in our compact class, destined for use by garages, car dealers, tradesmen, small to medium farms and small construction companies.... It comes in a new, vertical design that not only significantly reduces footprint and storage space, but also enables the products to be wall-mounted as semi-stationary units.
The NEPTUNE 2 can be easily stored and transported. In a workshop, the small footprint allows the machine to be easily placed in a corner - or on a wall - well out of the way. The new, versatile design can be placed vertically or horizontally during transport - ideal for a commercial van or station wagon. The optimally studies design with large wheels and good ground clearance can be easily tipped and pushed or pulled along uneven ground or up steps.
Design is one element. Technical performance, low cost cleaning and reliability are further key criteria.
The new NEPTUNE 2 is characterized by:
-26% smaller footprint than competition giving new storage and transport possibilities
-16% lower fuel consumption - a major benefit as fuel prices soar
-27% longer run time on a full fuel tank reduces machine down time
-100% mobility
Plus all the traditional Nilfisk-ALTO values:
-Reliability
-Unbeatable ergonomics
-Excellent cleaning performance
|
|
Mazzoni proposes a complete range of hot water high pressure washers.
Its offer, especially addressed to the professionals, also includes models for commercial and hobby use.
Available from 7 to 30 lts / min and from 120 to 250 bar, all Mazzoni hot water high pressure washers are equipped with professional pumps and elastic coupling.
All the models are sturdy but easy to handle and allow an intensive use even in unfavourable conditions. The heaviest versions, for example, have been equipped with a fifth jockey wheel that facilitates the displacement and also with a painted iron chassis to make them adapt to be used in the yards.
Several models of stainless-steel static machines for the cleaning of tools and machineries and anywhere it is necessary a regularly cleaning (food industry, motor shows, workshops, service areas).
Mazzoni is able to rapidly answer to all your needs also with personalised products able to satisfy the most particular demands.
|
|
|
|
|
|
Stationary installations from Nilfisk-ALTO are the answer to your cleaning needs. Machines can easily be installed in any location around the site. A carefully planned and optimized piping system will then ensure that you can easily and quickly clean at any area of your installation.
The Nilfisk-ALTO SOLAR BOOSTER 5 series is adapted to general use in light industry, vehicle cleaning and even self-service. The Nilfisk-ALTO SOLAR BOOSTER 7 series is optimal for tough and intense cleaning applications in heavy industry, transport and food industry. The famous C3 pumps used in the 7 series will just run and run… providing a valuable partner for the toughest jobs.
All Nilfisk-ALTO SOLAR BOOSTERS come equipped with galvanized steel frames and cabinets for ease of maintenance, and is easy to service. All units are equipped with Nilfisk- ALTO’s expandable control technology – meaning any standard machine can be turned into a personalized solution, thanks to a wide range of factory mounted options.
Diesel powered stationary heating for maximum efficiency Diesel powered stationary heating for maximum efficiency in the automotive, industrial and shipping sectors.
Electrical powered stationary heating for maximum efficiency in the automotive, industrial, food and shipping sectors.
Gas powered stationary heating for maximum efficiency in the automotive, industrial sectors.
|
|
Dynajet 150t
Compact, powerful and well thought out of right down to the last detail. Ideal for cleaning professionals, refurbishing experts and all users requiring the greatest cleaning performance from the combination of water pressure, amount of water and optimum water temperature. These professional machines are run with powerful diesel engines.
|
|
Dynajet 500th
Ideal for cleaning and refurbishing professionals as well as all users who have high demands in cleaning. The Dynajet 500th offers an optimum combination of water pressure and water flow rate and an optimum water temperature. Due to its design, the Dynajet 500th can be transported to the work place completely ready for operation. The speed of the diesel engine can be adjusted manually. Both the high pressure pump and the two high pressure burners operate independently of an external electrical power supply. Thanks to the integral water tank it is possible to carry out cleaning work flexibly and without a stationary water supply. Ideal for cleaning facades, old buildings, vehicles, construction machines, form-work, scaffolding, etc. as well as refurbishing facades, balconies and old buildings
|
|
|
|
|
|
The versatile Hannay PW-2 Series reel is designed to quickly mount to almost any type of pressure washer. It is ruggedly constructed of 12 and 14 gauge steel, with a black powder coat finish. It is designed for all mobile and portable pressure wash equipment as well as steam cleaning, spray and washdown applications.
The PW-2 Series reel has a pressure rating of up to 4000 psi and has an adjustable split bearing brake assembly allows for an infinite number of tension settings. The PW-2 Series also features a permanently attached direct crank rewind. A variety of optional mounting kits and accessories are also available..
Hannay Reels is the leading manufacturer of durable hose and cable reels for both OEM and aftermarket applications, offering thousands of standard models along with a wide range of custom design capabilities. The company’s superior manufacturing techniques, consistent quality, outstanding service and unmatched value result in the most dependable, best-engineered reels in the business. This formula has successfully allowed Hannay to help companies around the world improve the productivity, efficiency and safety of their operations since 1933. Hannay’s industry-specific expertise comes from decades of experience with a variety of markets, including firefighting, aviation, industrial, processing, audio/visual and transportation. For additional information, visit http://go.hannay.com/PR or email catalogs@hannay.com.
|
|
Kärcher high-pressure cleaners fulfill every demand and are used in the widest variety of fields. In agriculture, crafts and trades, industry, or municipalities – we are in our element wherever large areas must be cleaned daily.
Cold water high-pressure cleaners
Clean machines, vehicles and buildings daily: with high pressure and a high flow rate, cold water high-pressure cleaners remove even stubborn dirt. Ideal for large areas.
Hot water high-pressure cleaners
High pressure cleaners clean even better with hot water with the same amount of pressure. Kärcher machines are convenient to use, and they feature state-of-the-art technology.
Stationary
Kärcher stationary high-pressure cleaners are suitable wherever it is necessary to clean and disinfect several areas in a space-saving manner.
|
|
|
Hand-held or semi-automatic tools for cleaning and paint stripping on large-scale surfaces, such as ship hulls, storage tanks or engineering structures.
|
|
|
|
|
|
Industrial series:
a very ample and complete range that understands models to cold and warm water and with tensions both in singlephase that threephase. To use him in every sector for the cleaning with tall pressure and tall temperature with the possibility to mix, to application, a chemical additive. In the standard versions the powers reach 400 cafes with courses up to 60 lts. / min. In the water versions warm the temperature is adjustable up to 150° with possibility to produce vapor. With the specific kit it is possible to use her as hydrosandblasters. Thanks to the use of pomps and tested boilers and components to the state-of-the-art one our high pressure are how much of can offer better the market. Reliability, constructive quality and safety, are at the base of our products. We prepare of numerous used revised guaranteed.
Special series:
to application we are able to plan and to realize special groups with particular preparations. Our technical office is to your disposition.
Semiprofessional series:
numerous models both to warm water and to cold water for demands hobbyand for small interventions. They understand numerous accessories that make her functional for varied demands: kit uncork, kit sanding, rotating brush…
|
|
|
|
|
|
Overview
The unique GPW-1000-P Air Powered Hi-Pressure Washer can be used safely in all areas. It is ideal for applications where electric or gasoline powered units are prohibited due to hazardous conditions such as in refineries, and chemical, paint and nuclear plants.
GPW-1000P-50 Air Powered Hi-Pressure Washer.
Specs
. Motor Power: Up to 2 HP (1.9 kW) depending on air pressure and volume
. Air Requirements: Minimum 80 PSI at 75 CFM (5.5 BAR at 2.1 m3/min), Maximum 100 PSI at 85 CFM (7 BAR at 2.4 m3/min)
. Output Water Pressure: 1,000 PSI at 2.2 GPM (70 BAR at 8.3 LPM)
. Pump: Twin-piston cast iron
. Dimensions: 37" (940mm) high x 20" (510mm) wide x 17" (430mm) deep
. Weight: 67 lbs (30 kg) net dry
Features
. Air powered - shock resistant
. Stainless steel construction - long life
. Steel reinforced hose - rugged
. Stainless steel wand - durable
. Five quick disconnect nozzles - matches application
. Can use hot water - additional cleaning power
. Soap container - easy injection of chemicals
|
|
PRAMAC PW 3000
Main features
Maximum pressure : 200 bar
Flow : 15 l/min
Drive : Gearbox
Engine manufacturer : Honda
Starting system : Recoil
PW Series
Easily transportable and ready to use, this is the ideal machine for the myriad of professional and residential uses.
|
|
| ... products without technical information |
| |
|
Concepts using of the elastic discs of recovery to produce chucks of recovery inter or exter. Modularity, precision and great expansion.
|
|
|
|
see the results for the following category : 
