|
|
Advantages
Excellent removal water up to 99.99%
No filter element replacement
Less pressure loss
No effect in performance by time, flow rate, moisture proportion
Simple design and No moving parts
No electric power required
|
|
|
Atlas Copco proposes a broad range of compressors (screws, pistons, spirals, lobes, centrifugal) for the workshop, the industrial sites and the building sites. Lubricated or without oil, they answer any problems compressed air starting from 0,5 kw.
|
|
|
Food, pharmaceutical processes which require an air without any oil trace. From 1,5 to 900 kw, the compressors Atlas Copco bring a sure solution. Ranges Z with not lubricated screws are certfies ISO 8573-1 Classe O attesting the complete absence of oil in the produced air.
|
|
|
|
|
|
SULLAIR has extended the SMART PRESSURE range.
Practical experience, and customer feed back have all been taken into consideration in the new Pac 80E. With the economy of somany countries currently struggling, this new product will provide the ability to carry out some jobs without the expense of traditional compressors and tools. Smart Pressure range utilise an alternative pressure to the most common 6-7Bar compressors and hand held tools. Engine size has also been reduced from the common 20-30hp diesel engine to a 6.5hp petrol engine. Footprint size has been drastically reduced, so much so that it will now easily fit into a small van or hatchback car. Fuel economy is greatly
enhanced, thereby reducing the daily running costs.
The Smart Pressure range of tools includes a 22kg Paving Breaker, 10kg Demolition Tool, and now a 5kg chipping hammer. All produce power, and production performance equivalent to the same sized standard pressure tools. In addition, and to help protect the operator, Vibration is significantly reduced. Storage, when not in use has been enhanced by having the ability to be stacked, again an important issue for Rental
Companies. It is, for certain, that the standard pressure range of portable compressors and tools will continue from Sullair. The increased Smart Pressure range of tools with Pac 80E will give all purchasers the opportunity to increase their product offering to their customers based on the actual requirement of the job. By doing this it will enhance the utilisation of all the models in their fleet, this will include standard pressure equipment.
|
|
Screw compressors produce the required air delivery, which is stored in a compressed air receiver. This compressed air is then compressed to the required 40 bar operating pressure by booster compressors and is then stored in a high-pressure receiver.
Except for the screw compressor fitted upstream, the complete FLEXPET system with booster(s), switch cabinet, adsorption dryer, receivers and high-pressure filters is fitted firmly onto the base-frame and comes completely wired and piped.
|
|
|
|
|
|
Ingersoll Rand offers a wide range of innovative solutions designed specifically to address the production challenges of PET bottle blowing industry. Today you can choose between several highly advanced air compression technologies that best meet the unique production requirements of your plant.
At the heart of our product line we offer a range of innovative 4-stage centrifugal and reciprocating compressors that provide a perfect blend of efficiency, performance, and durability. Why? Because relentless innovation drives productivity and our advanced compressor solutions give you the edge to compete successfully in the global marketplace. Companies like yours must keep production lines running smoothly, production interruptions whether scheduled or unscheduled are costly.
So, with a thorough understanding of the dynamics in todays strenuous production environment, Ingersoll Rand unveils ground-breaking 4-stage centrifugal technology and 4-stage reciprocating technology for unmatched reliability and performance. Together with our other highly regarded reciprocating solutions, these superior technologies offer the PBM Industry:
|
|
|
ELGI's new generation PET air compressor features many technical advances that combine to enhance operation with superior efficiency and durability, along with rugged performance in the demanding bottle-blowing environments. The uniqueness of Elgi PET is that the suction unloader is of a simpler design compared to the diaphragm type versions which require periodic maintenance. The compressor, with in-built moisture separator, is also integrated with down- the- line filters and dryers to ensure the air is completely dry and clean.
|
|
|
The greenhouse effect, ozone layer and the planet's changing climate are just a few of the issues that have interested public opinion in recent years bringing environmental protection and energy saving to light. Companies who efficiently produce and use compressed air can contribute to environmental protection through energy savings, as well as decreasing their operation costs. Mattei, as a compressor manufacturer, is also fully aware and involved in these environmental aspects and has based its research on the improvement of the efficiency of its compressors, reaching a higher level of energy saving.
|
|
The medium range compressors of JAB do not pretend to be sophisticated low-pressure compressors, but individual devices that have been developed with the knowledge we gained during the construction of our compressors with a performance up to 350 Bar.
The main characteristics of these machines are oil pressure lubrication, oil pressure control, oil pressure monitoring, shut down in case of lack of oil, oil and water separation with automatic discharge and condensate separation as well as very low noise emitting values.
|
|
|
MATTEI has been a leader in the field of air compressors for industrial use for more than 80 years due to the attention it has always given to research and to the specific requirements of its customers. Mattei Rotary Compressors are a result of careful and continuous technological development with the achievement of excellent performance in every industrial area.
|
|
Mattei has been a leader in the field of air compressors for building industry for more over 70 years, renewing its range with even more efficient and compact machines.
These rotary vane compressors have been tested to operate in the most heterogeneous and hardest conditions. The main characteristics are low fuel consumption, reduced maintenance, high performances and reliability.
|
|
The A series, with capacity ranges from 37 to 2037 m3/h, provides both high performance and flexibility for medium-ranged industrial applications.
Complying with the majority of international regulations for environmental safety and ergonimics, the A series ensures considerable energy savings, low noise levels, and easy, trouble-free operation at a reduced life cycle cost.
|
|
|
Cost-effective Series air compressors are widely used in automotive, chemical, pharmaceutical, mining and air separation industries. The major components of each compressor package, the aerodynamic section, interstage coolers, integral gearing, lubrication system and operating controls have been engineered to deliver reliable performance.
|
|
OIL FREE type/SADSWDseries
Compressor supplying clean air excluding oil.
▪ Using special surface treated/ coated twin screw rotor.
▪ By adopting balance piston, exchange cycle of bearing is extended.
▪ Applicable in many fields such as food, medical, precise industry.
|
|
The TANDEM version is a unit made up of two Skid compressors assembled on a single tank as the previous version, with a second compressor and it can work as stock or as support in case the need of air should be higher than the yield of the single compressor.
Particularly suitable for the most common uses requiring air without oil with variable consumption values or requiring a stock.
|
|
|
General's oil less riser mounted air compressors are fully automatic, and virtually maintenance free. OL Series riser mounted compressors are designed to be easily installed either vertically or horizontally to the riser. Units may be installed as air maintenance compressors. All units are UL 2125 Listed. Standard motors are single phase. Three Phase and 50 Hz units are available - consult factory.
|
|
Oil free single cylinder and bi-cylindrical piston air compressors, also available in silent version with cooler and dryer.
The dry-type (oil-free) OFP series is designed mainly for medical and dental use. This is possible since the compressor group is not lubricated and, on top of that, the generated compressed air is cooled and subsequently dried, in order to eliminate all condensate residue that is produced during the compression process; the air vessel inside surface is treated to avoid any possible contamination
Thanks to the oil free pump the compressor produce high-quality compressed air, without presence of oil residual. With the cooler and dryer version, the air becomes perfectly dry, and therefore eliminates problems with eventual condense.
|
|
|
|
|
|
PROFESSIONAL
The production Thin you/he/she has been thought for covering all the possible professional uses of the compressed air, from the small artisan to the less serious industrial employments. Alternative pressers to pistons lubricated by 0,5 to 20 HP, pressers auto-lubricated by 0,75 to 3 HP on reservoir from 2 to 1000 liters various forms and dimensions, they decidedly offer a possibility of complete choice.
TREATMENT
The portable pressers are endowed with reduction gears of pressure with filter and lubricators to be able to use to the best the specific utensils of the sector. The treatment of the air Thin, recommended for the more serious professional uses, it is composed from refrigeration driers, filters for the separation of impurity, unloaders of it condenses, separators water-oil, reservoirs and everything the necessary to optimize the operation of the presser
USE
For the professional employments, Thin it proposes a vast range of accessories and pneumatic utensils: washing, blowing, inflating guns; sanders and smerigliatrici; professional airbrushes; screwers; serraters; spikers, aimers and so many other.
|
|
The R Booster Compressor is an electric powered reciprocating booster compressor.
The R55 Booster Compressor delivers 20.3 cu. Meters (700 scfm) of air at 350 psi (24 bar) discharge pressure with mine air pressure at intake of 90 psi (6 bar).
The R110 Booster Compressor delivers 40.6 cu. Meters (1400 scfm) of air at 350 psi (24 bar) discharge pressure with mine air pressure at intake of 90 psi (6 bar).
|
|
|
|
|
|
Continuous Air Systems' new line of high pressure boosters offers the latest in technology and cost efficiency.
All four models - 375B, 705B, 1125B and 1500B have revolutionized mining efficiency. They can increase penetration of in-hole drilling by 100% or more, and are capable of boosting present mine air pressure up to 350 P.S.I.G., for straighter drill holes, maximum bit life and faster drilling.
Continuous Air Systems boosters offer the latest computer controlled instrumentation, with easy to read gauges and lights for diagnosis of mechanical shut down problems. The 1125B and 1500B feature manual bypass switches which allow operation of any selection of compressors on the unit. This permits continued operation at reduced capacity if any compressors are shut down for maintenance. All boosters are designed to meet your high productivity requirements and come with a two year compressor warranty.
All CAS air boosters have gone through extensive on-site testing. Any necessary modifications were made when the "B" Series of CAS air boosters was released. Recently, Continuous Air Systems amalgamated all divisions of its company into one location, so that everything from production and design to inventory and sales is under one roof.
|
|
|
|
|
|
A revolutionary "customer-oriented" concept
ZD fixed-speed models: 1160 to 4018 m3/h - 40 bar(e) - 683 to 2365 cfm - 580 psig
ZD VSD: 6 variable speed drive models: ranging between 500/1152 m3/h and 1584/3957 m3/h 40 bar(e) - 295/678 cfm and 932/2329 cfm - 580 psig
ZD Xtend plus and ZD VSD Xtend plus: 40 bar (580 psig) + available 7 bar (101 psig) for labeling or capping machines or for instrument air
ZD HAT & ZD VSD HAT: for high ambient temperatures
ZD Xtend RI plus & ZD Xtend RI plus VSD : adaptation to reinjection
Versions : 50 Hz and 60 Hz
A reliable technology:
ZD is the combination of the ZR screw compressor with MD dryer and a fully integrated D-booster. It has been engineered as a single machine with centralized management.
ZD is true innovation based on a "customer-oriented concept" resulting in real savings and benefits:
high quality air, class 0 as per ISO 8573-1, certified by TV
installation without foundations
silencing canopy
compact and integrated equipment
very few connections
caring for energy
|
|
The ZL serie incorporates proven Atlas Copco industrial rotary technology, providing optimum performance, high reliability, long lifetime and reduced maintenance requirements.
Total integration of components such as silencers and drive system results in a complete air system, including all connections and outlet check valve. Combined with low noise levels this makes the ZL the perfect air solution for any industry.
All the benefits of Atlas Copco experience in design and manufacture of industrial compressors are combined in the ZL blower.
|
|
Advantages of JAB - High Pressure - compressors
Compact construction style
Most effective cooling system
Low compressed outlet temperature
High volumetric efficiency
Maintenance free oil and water separator for all pressure stages with automatic discharge
Oil pressure lubrication including pressure control
Pressure gauges for all stages and oil pressure
Safety valves for all pressure stages
Long life time of valves
Vibration free 3-point assembly
Suitable for air and neutral gas
High quality, robust and reliable
Efficient, economic, easy maintenance
|
|
HIGH PRESSURE type/PDSE,F,G,H,J,K series
Compressor supplying high pressure air
▪ AIRMAN original screw design enable to supply high pressure air.
▪ Suitable for foundation job such as jacking method, down the hole method, and large boring construction.
|
|
|
The P series reciprocating piston air compressors are a versatile, reliable and cost-effective solution for small- to medium-sized needs. The P range includes more than 90 different compact and noiseless models: stationary or mobile, with/without packaged air tank, filters and air dryer, driven by electric motor or gas engine.
|
|
The Micro Dia-Vac pump is the smallest pump offered by ADI providing exceptional quality, reliability and affordability. Available with general purpose shaded pole or brush/ brushless DC motor options. Maximum performance range: 0-13 LPM, 0-28Hg, and 0-30 PSIG.
Single Head Micro Diaphragm Pump (B161-FP-AA1 shown here)
|
|
|
The compressors and boosters high pressure Atlas Copco provide compressed air from 25 to 40 bars in standard version, and to 100 bars in overmeasure manufacture. For the FART applications, a special range, named PETPACK, is proposed.
|
|
|
Pneumatic handling, water treatment and any application air low pressure, the compressors and boosters Atlas Copco bring a powerful solution starting from 100 millibars.
|
|
| ... products without technical information |
| |
|
|