|
|
The ZH 4000-ZH 26000 is the most advanced centrifugal compressor series on the market. It is a unique combination, meeting customer requirements for low installation, operating and maintenance costs with high dependability and ease of use.
No other turbo equals its efficiency and economy and no other is supplied as complete. ZH oil-free turbo power: your guarantee for a consistent and highly reliable air supply carrying the quality label -Atlas Copco.
|
|
Available in four standard frame sizes, our multi-stage barrel compressors provide the oil and gas industry with natural gas gathering, re-injection, lift, depletion, storage/withdrawal and re-pressurisation solutions.
Barrel compressors are the preferred choice for high heads of pressure and low flow rates experienced in these applications.
Rolls-Royce uses advanced techniques to analyse each compression project to select the most flexible and efficient frame and rotor combination. For optimum performance predictability and production economy, each barrel frame size is based on families of standard stage components.
|
|
Atlas Copco integrally geared centrifugal compressors Series and direct driven compressors Series are designed to conform to the latest editions of applicable API standards. Each unit is a custom combination of standardised components tailored to meet project requirements. Provided below is a short listing of standard features and common options:
|
|
|
Cost-effective H-Series air compressors are widely used in automotive, chemical, pharmaceutical, mining and air separation industries. The major components of each H-Series compressor package, the aerodynamic section, interstage coolers, integral gearing, lubrication system and operating controls have been engineered to deliver reliable performance.
|
|
Compressors
Centrifugal Compressor
MAN Turbo’s product range includes a variety of centrifugal compressors. Centrifugal compressors are extremely robust machines that can be built for the compression of various gases.
The casing design determines whether the compressors are categorised as horizontally or vertically split, each type having different attributes and application limits. The advantages and disadvantages of each and the feasibility of using a particular compressor should be considered with regard to the application in question. The specialists at MAN Turbo will be happy to assist you in this.
Centrifugal compressors are used in a wide range of industries. MAN Turbo offers specific solutions tailored to the customer specification for various applications:
* Oil and gas industry (up-, mid- and downstream)
* Air separation plants
* Chemical industries & Petrochemicals
* Iron & steel, mining
* Paper industry.
|
|
|
|
|
|
C-KLR ZEPHYR
Volume flow: 80 - 140 m³/h
Overpressure: +1.0 bar
Vacuum: -0.6 bar
With the innovative, dry-running C-KLR ZEPHYR multi-claw range from Elmo Rietschle, pressure and vacuum can be combined in a single claw stage. All operation points on pressure and suction side work almost independently from each other. The C-KLR ZEPHYR operates economically and highly efficiently thanks to the patented triplelobe design with intermediate charging of air. This new design reduces pulsation in the pipes connected to the pump, and keeps the noise level low. An integrated cooling system for compressed air allows operation in applications, where compressed air
temperatures are of importance.
Advantages:
- High efficiency, dry and frictionless compression
- Low maintenance
- Integrated air cooling without additional cooling medium
- Suitable for multiple applications
This series is also available as vacuum pump (C-VLR ZEPHYR) and compressor (C-DLR ZEPHYR).
Typical Applications:
Printing & Paper, Chemical, Environmental, Packaging, Pneumatic Conveying, Woodworking
|
|
The Mink rotary claw pumps were developed especially for use in industrial applications where constant vacuum or pressure is required, along with totally oil free compression. Mink vacuum pumps or blowers are used in all applications, which require oil-free vacuum or oil-free compressed air.
The Mink is available as a single-stage or two-stage vacuum pump.
Features
* Non-contact operation
* No maintenance
* High efficiency
* Many different sizes and models
* Speed control (option) · ATEX certified (option)
* Version for oxygen delivery
Application
Ideal for use in various industries such as Plastics, Printing and Paper, Food, Beverage, Wood, Pneumatic Conveying, Brick Making, Adsorption and Degassing, Environmental Technology, Metallurgy, Remediation and many more.
|
|
ORKAN 900 - compressor (250 l/65.97gal) stationary
SPECIAL EQUIPMENT
- Reset button
- Starting balance
- Manometer for tank pressure
- Air flow tab
TECHNICAL DETAILS
Motor: 400 V / 5500 W
No. of revolutions:
2800 RPM
No of motor RPM:
1190 RPM
Cylinder: 2
Inlet power: 900 l/min.
(237.75 gal./min.)
Effective output: 620 l/min
(163.84 gal./min.)
Sound level: 78 dB(A)
Max. pressure: 11 bar
(156.2 psi.)
Tank: 250 l (65.97 gal.)
Weight: 168 kg (370.38lb.)
Measurements:
H 1120 (43.68) x
B 1600 (62.4) x
D 500 mm (19.5 in.)
|
|
HIGH PRESSURE type/PDSE,F,G,H,J,K series
Compressor supplying high pressure air
▪ AIRMAN original screw design enable to supply high pressure air.
▪ Suitable for foundation job such as jacking method, down the hole method, and large boring construction.
|
|
|
The P series reciprocating piston air compressors are a versatile, reliable and cost-effective solution for small- to medium-sized needs. The P range includes more than 90 different compact and noiseless models: stationary or mobile, with/without packaged air tank, filters and air dryer, driven by electric motor or gas engine.
|
|
Isotherm Compressor (Type RIK)
Isotherm compressors are single-shaft centrifugal compressors with integrated cooling. They are suitable for process air with minimal energy consumption. Over 1,000 systems have been produced, installed and commissioned to date.
Isotherm compressors are characterised by:
* Low energy consumption
* Low noise emissions
* Reliability
* Compact construction
* Centrifugal compressor inline
* Highly developed aerodynamics
* Cooler bundle in the compressor casing.
There are three types of isotherm compressor:
* RIKT: Centrifugal air compressor with volume flows up to 670,000 m³/h
* ARI: Combination of axial/radial compressor for maximum flow volume
* RIO: Process compressor for oxygen with minimal space requirements
|
|
The SA Double Acting Liquid Ring Compressor was specifically
designed to meet the stringent medical air requirements for providing
oil free medical air. In addition these units are used to provide
instrument air and requirements of clean air, not contamined by oil
smoke, in laboratories, pharmaceutical and chemical industry.
|
|
|
|
|
|
The compressors compress gases from a lower pressure (usually atmospheric pressure of surroundings) to a higher pressure.
PERFORMANCE: -
Max. compression pressure 11 bar
Max. intake volume flow 30.000 m3/h
ONE-STAGE LIQUID RING COMPRESSORS
for compression overloads up to 1.5 bar.
i.e. for: filter-rinsing in the cellulose, pharmaceutical and chemical industries, saturation of sugar juice in sugar factories,electrolysis gases with increased pressure for combustion plants
TWO-STAGE LIQUID RING COMPRESSORS
for compression overloads up to 3.5 bar
i.e. for: organic gas reactors and anaerobic processes, gas compression in the production of plastics
TWO-STAGE LIQUID RING COMPRESSORS
for compression overloads up to 6.5 bar (with double action second stage)
i.e. for: recovery of vapours in the petrochemical field, liquefying vinyl chloride vapour in the plastics industry
MULTI-STAGE LIQUID RING COMPRESSORS
for compression overloads up to 11.0 bar (predominately double acting stages
i.e. for: ozone compression in the bleaching of cellulose exhaust compression in nuclear power stations
|
|
|
Cost-effective Series air compressors are widely used in automotive, chemical, pharmaceutical, mining and air separation industries. The major components of each compressor package, the aerodynamic section, interstage coolers, integral gearing, lubrication system and operating controls have been engineered to deliver reliable performance.
|
|
OIL FREE type/SAD·SWDseries
Compressor supplying clean air excluding oil.
▪ Using special surface treated/ coated twin screw rotor.
▪ By adopting balance piston, exchange cycle of bearing is extended.
▪ Applicable in many fields such as food, medical, precise industry.
|
|
The TANDEM version is a unit made up of two Skid compressors assembled on a single tank as the previous version, with a second compressor and it can work as stock or as support in case the need of air should be higher than the yield of the single compressor.
Particularly suitable for the most common uses requiring air without oil with variable consumption values or requiring a stock.
|
|
|
General's oil less riser mounted air compressors are fully automatic, and virtually maintenance free. OL Series riser mounted compressors are designed to be easily installed either vertically or horizontally to the riser. Units may be installed as air maintenance compressors. All units are UL 2125 Listed. Standard motors are single phase. Three Phase and 50 Hz units are available - consult factory.
|
|
‘Oil free’ single cylinder and bi-cylindrical piston air compressors, also available in silent version with cooler and dryer.
The dry-type (oil-free) OFP series is designed mainly for medical and dental use. This is possible since the compressor group is not lubricated and, on top of that, the generated compressed air is cooled and subsequently dried, in order to eliminate all condensate residue that is produced during the compression process; the air vessel inside surface is treated to avoid any possible contamination
Thanks to the oil free pump the compressor produce high-quality compressed air, without presence of oil residual. With the cooler and dryer version, the air becomes perfectly dry, and therefore eliminates problems with eventual condense.
|
|
Pipeline Compressor
To compensate for the pressure loss that occurs when natural gas is transported long distances in pipelines, pipeline compressors are used to recompress the gas to its original line pressure. In extensively branched pipeline networks in particular, there is a need to vary the amounts of gas transported and the pressure conditions considerably at the compressor stations. This in turn makes high demands on the flexibility of the compressors, which should exhibit a high level of efficiency over a wide range of performance characteristics.
Pipeline compressors are also used in gas collection and gas processing plants as export compressors. The majority of compressors at the stations are driven by gas turbines. However, electric drive motors are being used increasingly as an alternative to turbines.
For these applications, MAN Turbo offers Types RV and Types RM pipeline compressors fully assembled on the base frame.
|
|
Sterling Service has more than 200 specialised service centres around the world. These are supported by a network of manufacturing centres and 50 wholly owned sales operations. All of this ensures the highest level of service is provided to our customers at a local level.
WHATEVER THE SOURCE OF YOUR ORIGINAL VACUUM EQUIPMENT - STERLING SERVICE SUPPLIES THE SOLUTION FOR YOUR PUMPS & COMPRESSORS.
- Replacement vacuum pumps
- Replacement compressors
- Emergency breakdown cover Repair
- Extended warranty
- Refurbishment
- Service contracts
- Original spare parts
- On-site service
- Re-engineering
- Commissioning-
- Installation
|
|
A. FEATURES
* Oil free and with no maintenance.
* Pressure up to 2 bar. Final vacuum up to 100 mbar.
* Pressure relief valve, inlet filter and silencer included.
B. APPLICATIONS
* Water treatment.
* Paper industry.
* Electronics.
* Packaging machines.
* Pneumatic conveyor.
|
|
|
This compressor incorporates simple, dependable, rotating sliding-vane technology to provide sustained performance pressures or vacuums for off-loading liquids. A rotary vane compressor takes in atmospheric air through a high performance inlet air filter, and discharges the compressed air at a higher pressure into a cargo tank. The elevated pressure pushes the liquid out through the discharge piping.
|
|
The compressors are designed as fully integrated, compact silenced packages with drive motor, coolers, moisture drains, reverse osmosis system and filtration along with a controller to ensure optimum efficiency and reliability. The Full Feature versions include the integration of environmentally friendly refrigerant dryers to ensure compliance with your air quality requirements and make the best use of your valuable floor space.
The Integrated frequency converter of the AQ VSD series varies the speed of the drive motor in order to exactly match the changes in your compressed air demand, thus using the minimum amount of energy and more than justifying the additional investment.
|
|
The SF scroll series relies on a radically new technology, ensuring economy in operation, extremely quiet running, minimum servicing and space saving, thanks to its simplicity and compact design. It is equipped with a highly efficient IP55 class F electric motor.
These compressors have a minimum of maintenance requirements, 10,000 running hours practically without maintenance while intermediate routine operations remain restricted and easy to perform.
|
|
|
|
|
|
PROFESSIONAL
The production Thin you/he/she has been thought for covering all the possible professional uses of the compressed air, from the small artisan to the less serious industrial employments. Alternative pressers to pistons lubricated by 0,5 to 20 HP, pressers auto-lubricated by 0,75 to 3 HP on reservoir from 2 to 1000 liters various forms and dimensions, they decidedly offer a possibility of complete choice.
TREATMENT
The portable pressers are endowed with reduction gears of pressure with filter and lubricators to be able to use to the best the specific utensils of the sector. The treatment of the air Thin, recommended for the more serious professional uses, it is composed from refrigeration driers, filters for the separation of impurity, unloaders of it condenses, separators water-oil, reservoirs and everything the necessary to optimize the operation of the presser
USE
For the professional employments, Thin it proposes a vast range of accessories and pneumatic utensils: washing, blowing, inflating guns; sanders and smerigliatrici; professional airbrushes; screwers; serraters; spikers, aimers and so many other.
|
|
HySTAT™ COMPRESSION MODULE
The pressure at which the HySTAT™ Hydrogen Generator module delivers hydrogen is often suitable for direct use in industrial applications however higher hydrogen output pressures are frequently required for vehicle refueling and power applications.
The standard HySTAT Compression Module, which features a diaphragm compressor, raises pressure to 430 bar (620 psi). Other compressor types, including reciprocating, can be integrated into the module as part of an optional package. The HySTAT Compression Module offers many unique features & benefits:
|
|
The SF scroll series relies on a radically new technology, ensuring economy in operation, extremely quiet running, minimum servicing and space saving, thanks to its simplicity and compact design. It is equipped with a highly efficient IP55 class F electric motor.
These compressors have a minimum of maintenance requirements, 10,000 running hours practically without maintenance while intermediate routine operations remain restricted and easy to perform.
|
|
Oil free spiral compressor, single module or multi modules, SPIRALAIR supplies a clan and oil free air, and suits perfectly to installations that require a low noise level, a minimum of maintenance and high air quality.
Power: from 2 to 20 hp
Pressure: from 8 to 10 bar
FAD: from 7.6 up to 95 m³/h
Air receiver: from 32 up to 500 litres
Noise level: from 53 up to 73 dB(A)
|
|
The R Booster Compressor is an electric powered reciprocating booster compressor.
The R55 Booster Compressor delivers 20.3 cu. Meters (700 scfm) of air at 350 psi (24 bar) discharge pressure with mine air pressure at intake of 90 psi (6 bar).
The R110 Booster Compressor delivers 40.6 cu. Meters (1400 scfm) of air at 350 psi (24 bar) discharge pressure with mine air pressure at intake of 90 psi (6 bar).
|
|
It is a unique combination, meeting customer requirements for low installation, operating and maintenance costs with high dependability and ease of use.
No other turbo equals its efficiency and economy and no other is supplied as complete. ZH oil-free turbo power: your guarantee for a consistent and highly reliable air supply carrying the quality label -Atlas Copco.
|
|
|
|
