|
|
DYNAMIC series
Power class: 65-370 kWOil-free compressed air at the best possible cost-benefit ratio! The DYNAMIC series offers an oil-free, two-stage turbocompressor series in the power output range of 65 to 370 kW with volumetric flow rates of between 9.7 and 65.5 m³/min and 9-bar final compressing pressure.
The DYNAMIC series is particularly suitable for applications in the medium to large industry sector, for example petrochemicals, refineries, the steel and automotive industries. In other words, wherever an even and extemely reliable compressed air supply is required; and particularly economical to boot!
Advantages:
100% oil-free compressed air
Clearly defined operating costs
Extremely low energy costs for plant operation
Very compact design with extremely high delivery quantity
User-friendly micro processor control
Minimum maintenance cost
Available as an open system or in a sound-insulated version
|
|
The compressors are designed as fully integrated, compact silenced packages with drive motor, coolers, moisture drains, reverse osmosis system and filtration along with a controller to ensure optimum efficiency and reliability. The Full Feature versions include the integration of environmentally friendly refrigerant dryers to ensure compliance with your air quality requirements and make the best use of your valuable floor space.
The Integrated frequency converter of the AQ VSD series varies the speed of the drive motor in order to exactly match the changes in your compressed air demand, thus using the minimum amount of energy and more than justifying the additional investment.
|
|
The SF scroll series relies on a radically new technology, ensuring economy in operation, extremely quiet running, minimum servicing and space saving, thanks to its simplicity and compact design. It is equipped with a highly efficient IP55 class F electric motor.
These compressors have a minimum of maintenance requirements, 10,000 running hours practically without maintenance while intermediate routine operations remain restricted and easy to perform.
|
|
|
Food, pharmaceutical processes which require an air without any oil trace. From 1,5 to 900 kw, the compressors Atlas Copco bring a sure solution. Ranges Z with not lubricated screws are certfiées ISO 8573-1 Classe O attesting the complete absence of oil in the produced air.
|
|
The SF scroll series relies on a radically new technology, ensuring economy in operation, extremely quiet running, minimum servicing and space saving, thanks to its simplicity and compact design. It is equipped with a highly efficient IP55 class F electric motor.
These compressors have a minimum of maintenance requirements, 10,000 running hours practically without maintenance while intermediate routine operations remain restricted and easy to perform.
|
|
Analyze Up To 2 Samples A Minute
Today, there are numerous requirements for the analysis of oil based materials. Some of the more frequently employed include: the measurement of wear metals in lubricating oils, the measurement of additive packages in lubricating oils and the measurement of the elemental content of edible oils. Although the specific requirements of each of these analysis are quite different, the analytical approach used is very similar.
Typically, laboratories interested in measuring the elemental constituents of edible oils have fairly conservative sample analysis requirements; perhaps only 10 to 100 samples per day. Most of these labs chose the Profile Plus Oil Analyzer for this application.
Laboratories for which the primary application is the analysis of wear metals often have extreme sample throughput demands; often in excess of 1,000 samples per day. High throughput wear metals labs typically chose one of our simultaneous oil analyzers, such as the Profile HT or Prodigy HT for this task. A system like the Profile HT is capable of analyzing in excess of 2 samples per minute.
|
|
Leakwise Oil on Water Monitor
Leakwise Oil on Water MonitorLeakwise Oil-on-Water Monitoring and Detection Systems from GE Analytical Instruments provide early, reliable, low maintenance warning of hydrocarbon leaks and spills 24/7 without false alarms. A Leakwise system consists of a wire or wireless signal processor and one of more sensors, depending on the application.
Leakwise oil detection sensors use high frequency electromagnetic energy absorption floating sensors, which enable reliable monitoring of hydrocarbon on water regardless of dirt or oil coating of the sensor or change in water level or water salinity. Advantages include:
%u2022 Provides reliable coverage 24/7 with no false alarms
%u2022 Operates virtually maintenance free for years
%u2022 Detects oil layer thickness (as little as 0.3 mm)
%u2022 Offers an affordable solution for oil leak detection
Applications include oil leak monitoring at refineries, petrochemical plants, pipelines, gas stations, power plants, underground transmission, remote substations, transformer switchyards, marine ports, airports, steel and aluminum manufacturing plants, offshore rigs, groundwater and stormwater runoff, wastewater treatment plants and more.
Leakwise is also an ideal tool for strengthening Spill Prevention Control and Countermeasure (SPCC) plans, as required by the USEPA.
|
|
|
Oleotrol is an automatic alarm system for water streams which operates continuously so as to prevent damages from oil leaks. It uses a physical property-light reflection from a film of oil on the water surface - to signal small amounts of oil in water streams which are normally oil-free.
|
|
Model 6600 Oil-in-Water Analyzer System
Teledyne's Model 660/661 was the industry standard in oil-in-water analysis for 30 years. The microprocessor based 6600 / 6610 improves upon our proven analog circuitry and the sample handling system. The new, compact modern design incorporates many new features at a significantly reduced cost. Critical features include:
Folded optical system optimized for excellent signal-to-noise ratio and stability
Increased reliability by eliminating many moving parts
New sonicator homogenizes oil (in-line) in water instantly (less than one second)
Improved auto-zero filter system prepares zero fluid for calibration and zeroing without long sparging cycle
Specially developed software with auto calibration features
Automatic self-cleaning sample cell suitable for high pressure and temperature
Manual calibrations done easily with collected zero fluid from sample system using the gravity fed reservoir
Manual or automatic span sensitivity easily checked with internal span flag once field calibrated
Faster response time
Modular design configured to meet specific application requirements
|
|
| ... products without technical information |
| |
The strong point of the threephase model OIL 440 is that it can separate the vacuumed swarf and liquid and return the filtered liquid to the machine tool where it can be used again.
The machine is equipped with an ejection pump , so the liquid can be expelled during the vacuuming operations, in this way using the vacuum is fast and efficient ("E" version) in the same time.
|
|
Thanks to the 40-years of experience in this specific industry, RIBO designs and manufactures reliable and robust industrial vacuum cleaners, partcularly fit for all the cleaning and maintenace operations of metal working/cutting machines.
In fact, RIBO industrial vacuum cleaners can vacuum solid and liquid materials, also simultaneously, allowing to pre-separate materials inside the container, in order to facilitate wasting/recovering operations of vacuumed materials.
Reaffirming the well-established characteristics of QUALITY, RELIABILITY and ROBUSTNESS, RIBO gives to its machines 3 YEARS WARRANTY for single-phase machines and 5 YEARS WARRANTY for three-phase machines.
|
|
|
The Tecnoil range is especially designed to suck up, clean and recycle the oil and coolant on machine tools. Single and three-phase models from 3 to 15 HP, capacities from 150 to 700 litres.
|
|
- Power: between 6 and 11 kW
- Air flow: 660 to 1220 m3/h
- Vacuum: 5700 to 6500 mm/CE
- Filtering surface: 12 to 32m²
- Capacity: 100L
|
|
| ... products without technical information |
| |
Application
Diaphragm pumps of the NT-series are oilfree dry running pumps for the generation of vacuum as well as the delivery and evacuation of gases and vapours. In chemical laboratories they are the more powerfull and modern alternative to water jet pumps, because they are more friendly to the environment at minimized operation and maintenance costs. Typical applications: on vacuum drying chambers, for distillation, drying, and vacuum filtering but also as backing pump for turbo-molecular pumps, gas transfer and the like. The pumps produce little noise and vibrations and are therefore ideal for installation in sensitive devices (e.g. chemical analysis).
Advantages
There are one-, two- three- and four-stage pumps available. The vacuum performance has been increased considerably, which expands the application field for both laboratory and industrial use. The one-stage pumps are designed for an ultimate vacuum of 70 mbar, the two-stage pumps for 7 mbar, the three-stage pumps for down to 1 mbar and the four-stage pumps for 0.5 mbar. International Protection code for all NT models is IP 42 (except those with switchable dual-voltage motors). The NT pumps are designed very compact and are exceptionally quiet and smooth-running. Smooth housing surfaces (except for the two-cylinder aluminium version) make the NT diaphragm pumps easy to clean. On the whole the pumps work almost maintenance-free. All models have easily changeable valves and diaphragms.
|
|
For applications requiring extremely quiet, highly efficient operation and simple maintenance, our oilless linear pumps have found widespread use in the medical, industrial, chemical, environmental, and scientific industries.
Smooth air flow makes these models ideally suited for applications requiring consistent air flow
Electromagnetic oscillation eliminates sliding parts, minimizing power consumption, offering high efficiency and long-term continuous operation
Oilless operation means exhausted air is always clean and particle-free
Low noise level due to innovative design considerations in the pneumatic circuit and mechanical construction
|
|
Product Features
* Quiet Operation
* Low Power Consumption
* Low Starting Current
* Oil-less, Contamination-free exhaust air
* Long Life
* Automatic Pressure Limitation
* C.E. Compliant and U.L. listed Models
* U.L. Outdoor Rating on HP Series
* Easy to Service
* Custom OEM Models
* Thermal Protection
* Aerobic Wastewater Treatment
* Aquaculture Aeration
|
|
|
Their special design with low weight and small dimensions make the UVD units extremely compact and reliable. This is achieved through the direct assembly of rotor on motor shaft and a powerful centrifugal fan for cooling. UVD vacuum pumps are suitable for evacuation of small, closed systems with residual pressure of up to 120 mbar.
|
|
VANTAGE
DC fuel transfer pumps
The all new DC pump for plant equipment featuring new innovations in design and compact in size, incorporating a new level of pump intelligence allowing the pump to monitor its own activity and performance.
Studies have shown that, in the majority of cases, fuel-transfer pumps break down because of improper handling by users, including excessive or extreme use, accidental start-ups, or simple carelessness, that can leave the pump running for hours on end. Breakdowns translate into loss of time and money while waiting for the pump to be repaired. These difficulties are overcome with VANTAGE. Thanks to new, internationally patented technology, VANTAGE automatically prevents situations from becoming critical.
|
|
High speed delivery system
Direct current motors 12 V and 24 V
Maintenance free
Self priming Simple to install
Can also be used for pumping water
|
|
The diesel fuel pump for construction machinery is maintenance-free and robust, operating extremely reliably at temperatures to -20° C. The pump is available either with 12 V DC or 24 V DC motors.
|
|
SA.3 - SA.3TV
Oil free vane vacuum pumps
Limited weight and dimensions are possible by the monobloc industrial design type with the rotor directly assembled on the motor shaft.
Mainly built with light-weight alloys, they can be fitted where there is limited space, provided there is good ventilation. Perfect leak tighteness is achieved by Model TV thanks to the special design combined with FKM gaskets.
Standard equipment includes:
Silencer at the exhaust (SA.3)
Thermal protector (130°C) (1~only)
Model SA.3 is suitable for use as a compressor; see technical features and accessories on page 26 and 31.
|
|
|
|
see the results for the following category
