|
|
- A wide range of options available for your specific applications
- Excavate at remote locations or in tight urban areas
- Quickly & safely excavate around foundations & elevator pits
- Fastest, most accurate way to expose underground utilities
- Dig utility and other pole holes with speed, safety & consistency
- Year-round use to easily slice through dense clay or frozen soils
- Unmatched performance and durability from over 34 years of industrial vacuum design and manufacturing expertise
|
|
The Supersucker® M-Class offers state-of-the-art vacuum technology incorporating a modular design that provides low maintenance, heavy duty vacuum efficiency, super airflow, and the best performance in the industry.
M-Class stands for Modular design that gives you flexibility in selecting the correct body size and number of separators and baghouses to meet your particular job requirements. Supersucker® is known throughout the industry as the easiest vacuum loader to Operate, Clean & Maintain.
|
|
FAUN sewage vehicles
FAUN sewage vehicles provide the most efficient means for the optimal and economic disposal of your liquid waste.
The entire spectrum of vehicles for liquid waste is available from FAUN:
* High-pressure washing vehicles
* Combined high-pressure washing and suction vehicles
* Combined high-pressure washing and suction vehicles with water reclamation facility
* Suction pressure tanker vehicles for liquid waste disposal
Naturally, vehicles can be adapted to meet special requirements. The following page demonstrate the wide availability of this range of FAUN products.
|
|
Our company produces kinds of special-purpose vehicles such as sewage suction vehicle with different chassis, of which the Dongfeng chassis models including long head Dongfeng 5t, flat head Dongfeng 5t, and flat head Dongfeng 8t
Its main functions are sucking and transporting manure sludge, stone and bigger floating mixture and more for city environmental protection departments
Parameters:
Power: 132kW
Rated payload: 7,550kg
Kerb weight: 7,350kg
Chassis model: EQ1141KJ2
Engine model: ISDe180 30
Tank working volume: 8.0cbm
Vacuum pump rated rotation speed: 500r/min
Maximum vacuum degree: 99.6%
Theoretical pumping speed: 45L/S
Working suction lift: ≥4.5m
Online Order NoBrochure
|
|
MISTRAL 16T
16T chassis-cab
6.4m3 tank
High pressure jetter : 100 litre/mn, 180 bar
Blower type vacuum pump 'VTB810' : 1000m3/h
Moving partition-Boom 3/4"2 axis-main hose reel
MISTRAL 19T
19T chassis-cab
8.5m3 tank
High pressure jetter : 212 litre/mn, 190 bar
Blower type vacuum pump 'VTB820' : 1300m3/h
Moving partition-Boom 1"2 axis-main hose reel with guiding screw
MISTRAL 26T
26T chassis-cab
12.3m3 tank
High pressure jetter : 212 litre/mn, 190 bar
Blower type vacuum pump : 1300m3/h
Moving partition-Boom 1"2 axis-main hose reel with guiding screw
MISTRAL 32T
32T chassis-cab
15.9m3 tank
High pressure jetter : 212 litre/mn, 190 bar
Blower type vacuum pump : 1300m3/h
Moving partition-Boom 1"2 axis-main hose reel with guiding screw
|
|
|
|
|
|
BLIZZARD 6.5T
6.5T chassis-cab
2.7m3 tank
High pressure jetter : 55 litre/mn at 150-250 bar
Vane type vacuum pump : 400 m3/h
1/2" diam. hose reel + RGOS
Odour trappind device
BLIZZARD 10T
10T chassis-cab
4.6m3 tank
High pressure jetter : 59 litre/mn at 250 bar
Vane type vacuum pump : 672 m3/h
Fixed partition
1/2" diam. hose reel
BLIZZARD 12T
12T chassis-cab
5m3 tank
High pressure jetter : 75 litre/mn at 180 bar
Vane type vacuum pump : 670 m3/h
1/2" diam. hose reel
BLIZZARD 16T
16T chassis-cab
6.6m3 tank
High pressure jetter : 100 litre/mn at 180 bar
Vane type vacuum pump : 770 m3/h
Moving partition
3/4" diam. 2-axis hose reel
BLIZZARD 19T
19T chassis-cab
9.8m3 tank
High pressure jetter : 212 litre/mn at 190 bar
Vane type vacuum pump : 1210 m3/h
1" diam. 2-axis hose reel with guiding screw
Moving partition boom
BLIZZARD 26T
26T chassis-cab
14m3 tank
High pressure jetter : 212 litre/mn at 190 bar
Vane type vacuum pump : 1250 m3/h
1" diam. 2-axis hose reel with guiding screw
Moving partition boom
|
|
OASIS 19T
19T chassis-cab
7.8 m3 tank with water recycling facilities
High pressure jetter : 310 litre/mn at 160 bar
Blower type vacuum pump : 1500 m3/h
Boom 1" diam. main hose reel with guiding screw.
OASIS 26T
RENAULT 26T chassis-cab
12.2 m3 tank
High pressure jetter : 380 litre/mn at 160 bar
Rotary piston drainage pump : 1500 m3/h
1" diam. 2-axis hose reel with guiding screw.
3 recycling compartments
Rivard patented water recycling facilities can also operate as a traditional combined jettig/suction unit.
OASIS 32T
32T chassis-cab
14.7 m3 tank
High pressure jetter : 400 litre/mn at 175 bar
Rotary piston drainage pump : 2500 m3/h
Boom 1" diam. 2-axis hose reel with guiding screw.
Rivard patented water recycling facilities
|
|
CLEANFOS 16T
16T chassis-cab
8.8m3 tank
High pressur jetter : 45 litre/mn at 300bar
Vane type vacuum pump : 770 m3/h
80 m capacity jetiing reel
30 m capcity rear suction reel
radio control (optional)
CLEANFOS 19T
19T chassis-cab
12m3 tank
High pressur jetter : 45 litre/mn at 300bar
Vane type vacuum pump : 770 m3/h
80 m capacity jetiing reel
30 m capcity rear suction reel
radio control (optional)
CLEANFOS 26T
26T chassis-cab
14.5m3 tank
High pressur jetter : 45 litre/mn at 300bar
Vane type vacuum pump : 770 m3/h
80 m capacity jetiing reel
30 m capcity rear suction reel
radio control (optional)
|
|
|
|
|
|
The tipping horizontal pressure tank O.ME.P.S. type CM 25 is manufactured of Peraluman 45 R light alloy to transport powdery foodstuff (flour) for a total capacity of 25 m3. It is tested at 2 bar pressure according to the standard PED 97/23/CE.
The vertical discharge system is equipped with:
n° 03 load manholes with 3 wing nuts’ closing;
atoxic and polyvalent unloading system;
n° 1 aluminium bottom for the product unloading, complete of butterfly valve, Ø 150 mm;
atoxic rubber pipeline;
accident protection (n° 1 anti-slip ladder, n° 1 gangway with a pneumatic safety handrail) according to the standard C.M. 294/93;
n° 2 unloading hoses, Ø 100 mm, 6 m long, complete of their hosetubes;
tank chassis in S 355 JR steel, equipped with n° 2 saddles for the tank support;
hydraulic system compound of tipping cylinder, valves group for the control, hydraulic circuit with pipeline and connectors, hydraulic oil tank, rear stabilizing legs, kit hydraulic pump
Tank painting: unique tint O.ME.P.S. WHITE (different colour/logo application on demand)
Structure guarantee: 24 months.
The tank is homologated in accordance with the standard PED 97/23/CE
* Supply and assembly of N° 1 GHH - RAND COMPRESSORS TYPE CG 80, PTO not included (supply by your side).
|
|
|
BELLOJET® ZC Loading Bellows are used for efficient dust controlled discharging of dry, dusty bulk solids into open lorries / trucks. The spouts are provided with inner tapered cones to contain the flow of material and an outer double bellow to provide for dust removal.
|
|
Mobile Truck Lance
Series 616
The Mobile Truck Lance by Dynamic Air Inc. is specifically designed to be inserted into a standard "Sea Bulk Powerliner" so it can be filled with dry bulk granular materials quickly, easily and safely. The mobile truck lance has the ability to not only move forward and backward, but it can also raise upward or downward, as desired. This critical adjustment of the lance itself is necessary to meet the specific location of each and every truck which, dimensionally, may be different from time to time. The lance, made of stainless steel, is perforated to allow the bulk container to be filled to optimum capacity without having to move the lance from its original position after insertion. The mobile truck lance is mounted on a horizontal track and attached to a heavy-duty conveying hose and dust extraction line, so that everything operates together in a simple movement.
|
|
XP Bulk Material Loading Spouts
All Sly XP bulk material loading spouts have internal stacking cones to direct material flow. When used with a negative pressure dust collection system, it is truly dust-free. Applications include: truck, rail car, tote bin, flexible bulk containers, carton, and drum. In addition to the standard options found on the PV series, the XP bulk material loading spouts can be custom engineered to meet the most demanding load out environments requiring: explosion proof, abrasion resistant or stainless construction and many others.
Options to increase Sly XP bulk material loading spout performance include slack-cable limit switches, and the patented EZView™ lower weldment, which provides viewing ports that permit the spout operator to see the fill status without having to raise the spout above the loading point. This feature helps avoid spills as well as provides the necessary make-up air required for fugitive dust removal.
|
|
Loading spout for open truck
The loading spout for tank trucks is made of 2 ducts: a central one to transfer the product from the silo to the truck and an external one to collect dust emissions. According to the applications, the central duct can be different: flexible duct, mild steel cones or telescopic tubes.
The lower part of the loading spout will inch up progressively as required, so as to properly load the product into an open truck or directly on the ground (as required by the application).
A command and control cabinet ensures an automatic loading that complies with normal security requirements ie : motor overheating, automatic lifting, etc...
|
|
|
|
see the results for the following category : 
