|
|
|
|
|
|
Modular in design, ASGCO Weigh Belt Scale performs in a wide variety of conveyor styles and structures in English or metric. Versatile ASGCO Weigh Belt Scale installs in series to create a 2 or 3 idler weigh bridge - minimum of 2 load cells.
- Easy to Install - ASGCO Weigh Belt Scale which typically takes less than 2 hours for complete installation and start up!
- Virtually Maintenance Free - because its low profile minimizes build-up areas where dust and dirt accumulate.
- User Friendly Software Powers the ASGCO Totalizer - requiring input of only 5 field parameters before initial calibration.
- The Totalizer is Automated - because belt length and speed are automatically calculated and entered.
- Totalizer Provides a Wide Variety of Outputs - to drive printers, chart recorders, PLC devices and controllers.
- ASGCO Weigh Belt Scale is Simple - consisting of a speed sensor standard encoder - no expensive housings or assemblies
- A wide selection of Options are Available: wheel mount kit for speed sensor, cross tube kit for heavy duty / high belt loading applications, low capacity load cells for light duty applications and field wiring installation kits.
|
|
Conveyor beltweighers weigh and control continuous flows of bulk materials accurately and without inconvenient interruption.
Careful adaptation to the respective product characteristics is the basis for repeatable results.
• Flexible product range for almost all common belt widths; designs for use in legal metrology also available
• Adjustment, batching and loading control extend the field of application and provide optimized product flow and handling
|
|
|
|
|
|
The scale operates while the conveyor is in motion and is intended for the weighing of individual boxes, cartons, cans or -unpackaged products such as large cuts of meat. It is ideally suited to checkweighing, straight weighing and weight accumulation operations.
Fully automatic - Dual photo electric cell arrangement allows maximum accuracy in weighing randomly sized products. Excellent for feeding meat production lines or for checkweighing boxes, cans, cartons etc. Detect weight problems in-line.
Self-contained - Freestanding, self-powered design operates independently of existing belt conveyor. Unaffected by idler friction or belt tension and requires no damping device. Installs easily in new or existing facilities.
Stainless or carbon steel construction - Provides a cost effective choice based on material handling requirements. Stainless steel scales are matched with a stainless steel indicator to meet NEMA 4X standards for washdown and corrosion resistance.
Belting - USDA approved acetal flush grid with 31% open area for easy maintenance. Special belting available.
Weigh Bar accuracy and reliability - Weigh-Tronix patented weighbar design cancels out side, end and torsional forces to provide a true downward load. Fully electronic design eliminates moving parts that may be affected by wear or misadjustments.
|
|
Model S4a :
The belt conveyor scale of "S" line is a microprocessor based equipment specifically designed for industrial plant applications. Typical applications may be: Stock pile plant handling, belt feeder flow control, blending and batching systems.
MAIN FEATURES :
- No modifications to the conveyor structure
- Weighing area spans from 1 to 4 idler stations
- Pulse generating speed transmitter
- Optoisolated RS485 serial ports
- Optoisolated 4-20 mA flow rate output
- Failure alarm hardware output
- Optoisolation of all digital inputs/outputs
- Periodic self corrections of thermal drift
|
|
|
|
|
|
Ramsey Series 14 Belt Scale System
The Thermo Scientific Ramsey Series 14 Precision Belt Scale System is specifically designed for high accuracy or basis-of-payment applications requiring certification by government and regulatory agencies. It is extremely accurate to within 0.125% and is the most widely certified belt scale in the world. It lets you monitor production output and inventory, or regulate product loadout, while providing vital information for the effective management and efficient operation of your business.
Product Detail
The Thermo Scientific Ramsey Series 14 Precision Belt Scale System from Thermo Fisher Scientific is specifically designed for high-accuracy or basis-of-payment applications requiring certification by government and regulatory agencies.
The Thermo Scientific Ramsey Series 14 incorporates the Ramsey 10-14 low-deflection, full-floating unitized weighbridge and the Ramsey 61-12C Belt Speed Sensor. Both are well-proven on hundreds of precision belt weighing installations.
It also utilizes the Ramsey Micro-Tech 2301 or Ramsey Micro-Tech 3301 Electronic Integrator and the Ramsey 2301-D Load Cell Exciter/Digitizer, which are the products of 50 years of design and application experience with high-accuracy belt scales.
Applications
The Thermo Scientific Ramsey Series 14 Precision Belt Scale System represents the world standard of accuracy and performance for loadout, inventory monitoring and fee-holder type applications requiring certification.
Certification
As the most widely certified electronic belt scale in the world, the Thermo Scientific Ramsey Series 14 has received its Certificate of Conformance in the United States as issued under the National Type Evaluation Program (NTEP) of the National Conference on Weights and Measures. Outside of the US, it is certified by OIML and EEC Class I standards.
Performance Guarantee
On factory-approved installations, we guarantee that the Thermo Scientific Ramsey Series 14 Precision Belt Scale System will weigh and totalize to a value within ±0.125% of the test load at flow rates between 25% and 100% of the scale system's calibrated capacity when calibrated against an actual weighed material test. Furthermore, we warrant that the scale system will repeat to within 0.1% of consecutively run, simulated calibration tests.
|
|
For new conveyor installations or retrofit existing conveyors. Weigh Legs have adjustable height and capacities from 250 to 1,000 lb per Weigh Leg frame.
Weigh legs allow you to save steps and increase productivity with in-line weight measurement and checkweighing.
The Weigh Leg frame is an integrated assembly, incorporating two supporting legs, two Weigh Bars, junction box and cabling. The finish is a heat-fused powder paint, which provides a high level of corrosion protection.
|
|
| ... products without technical information |
| |
Chatillon crane scales and dynamometers deliver optimum performance for weighing tension, traction and weight. We offer mechanical and digital readout scales that are ideal for industrial applications, warehouses, shipyards, terminals, etc.
|
|
Phantom Crane Scale
Phantom crane scale is one and first crane scale with loadcell,indicator,control unit and design , produced in Turkey.Its 1-2 and 5 tones.There are remote control unit and serial printer output as option.It is used for any material weighing on the crane.
Checkweigher
Checkweigher, offers the weigher control of packaged products carried on the conveyor belts. After weighing, the packages wich have less or more weight are removed from the belt manuallty or by means of air. As the measurement is completed, all results are recorded for reporting.
Depending on the application, the system might included one belt or three belts as infeed, weighing and outfeed belt. Checkweigher with three belts are used to separate the products from each other and to organize them at the exit. It is easy to install and use with its user friendly interface and an ideal tool for quality control departments.
|
|
Around the world, cranes are used to load ships, vehicles and containers. Casting and charging cranes handle material flows in foundries and steelworks. These materials must be frequently, reliably and accurately weighed, and without any delay.
Schenck Process supplies the perfect solution: electromechanical crane scale systems for all required classes of accuracy, customised for specific projects and applications, from systematically planned standard solutions through to customised design.
|
|
|
From 50kg to 400T, these autonomous devices of weighing offer a display of weighing very legible. They have an excellent reliability and allow a large repetitiveness combined with many options which make easier the reading and the functioning (printer, sum of weight, return on PC, deported display…).
|
|
1 apparatus = 3 capacities of lifting.
Conceived for the measurement and the control of loads.
Portable, light, with triple scale of reading, bill-poster LCD of 25 mm to 6 digits, keyboard seals with 4 keys, automatic waking state, precision + 0.03% on the most precise scale, manilles galvanized, Indice of protection IP 54, infra-red remote control .....
Available on request:
Professional range: of 150 kg to 9 tons, version stainless with protection IP 65 and version for crane
Range high capacity: from 12 to 55 tons
Range ATEX: of 600 kg to 35 tons
|
|
|
|
|
|
Warning: Models HTS with Max >= 3.000 kg only available on pallet
10 tare memory units, 10 unassigned memory units, e.g. for weight increments or identification numbers, summation storage, adds up all individual weighing processes (TOTAL)
Charge condition indicator for rechargeable battery, visual by means of LED
Adjustment program CAL. External test weights available at an additional price
Rechargeable battery pack internal, standard. Operating time approx. 150 h, charging time approx. 15 h. Models until incl. Max = 1.500 kg internal, through mains adapter, For models from Max = 3.000 kg external. Batteries can be reordered at any time
Luminescent LED display. The intensity can be adjusted in 2 stages to preserve the battery. Models with Max until 1.500 kg incl., digit height 25 mm, with Max from 3.000 kg, digit height 30 mm
Infrared remote control standard. Range approx. 15 m. All functions are selectable. Input via numeric key pad, incl. protective case WxDxH 200x80x28 mm, batteries Size AA (2 x 1,5 V) included
Hook with safety catch, revolving
Standby function. Automatic switch-off of the display after 5 min without a change of load. Reactivation of unit with the touch of a key
|
|
Lifting accessory in accordance with CE directives N°89/392 - 91/368 - 93/68 and European Standards N° EN 292 - EN 55 022 - EN 50 082.2
Display with red light-emitting diodes (LED)
Height of digits : 25 mm
Ambient temperature range : -10°C to +50°C
Weatherproof and dustproof : IP65
Material : body in aluminium alloy
Finish : painted
Top suspension shackle - Bottom hook with catch
Power supply : 6 V, 12 AH rechargeable battery.
Power consumption : variable, depending on the setting of the functions
Battery life : 15 hours, but variable, with fully charged batteries (alkaline)
Accuracy : +/- 0.2% of capacity, or better.
|
|
|
|
|
|
Today's metal service centers and similar facilities require more accurate weight data for the products they ship and receive. They also want to move their products faster and less expensively.
Bushman AvonTec combines the two processes, joining our rugged material handling equipment with the most advanced electronic load weighing equipment to give you fast, accurate and repeatable digital weight information.
Incorporating the load weighing equipment directly into the material handling gear results in:
- Eliminating the need for floor scales, thereby increasing usable floor space
- Limiting product handling significantly reduces product damage
- Increasing throughput by reducing material handling time up to 50%
Features Include:
- Accuracy from plus or minus 0.1% to 0.3% of actual load within the resolution of the display
- Proven, commercially available electronic components
- Calibration settings saved in memory even during loss of power
- All Bushman AvonTec products conform to the latest revision of ASME Spec. B30.20 and BTH-1: Design of Below-the-Hook Lifting Devices.
|
|
RON Industrial crane scales are used for weighing during lifting and for overload prevention.
The RON 3025 series are compact crane weighers and digital crane scales.
The RON 3025 digital crane scale has a robust extruded aluminum body. Absolutely no castings in the unit.
The digital crane scale's large LCD display can be read at a considerable distance, even in sunlight.
The compact dimensions of the crane weighers ensure minimum headroom loss.
All digital crane scales are factory-tested and supplied with a test certificate, including a fully traceable calibration chart.
2000 hour battery life - applicable to all RON crane scale, dynamometer and load cell series and load cells with built-in amplifier:
RON Crane Scales excel in high quality, are based on the latest technologies and comply with the strictest safety standards.
All RON Crane Scales are made of the highest quality, aerospace steel.
|
|
Crane weighers
Measuring range 0 - 12 t
The crane weighers TKA and TWF are compact measuring devices for the weighing of loads.
- with digital display model TKA
Features
- High accuracy
- Lightweight design
- Easy-to-read display
- Easy to use
- Excellent quality
- Robust design
- Housing swivelling 180°
- Retains the peak value to memory
- Rechargeable, with integrated storage battery
|
|
| ... products without technical information |
| |
|
|
|
|
Glass scale gratings are available in a variety of configurations. They are intended for applications where the user provides the scanning unit and the electronics to create a customized measuring or detection system. The quality glass gratings are available as linear scales up to 3400 mm length, as disco shaped scales with diameters up to 400 mm, or in special geometric configurations.
Material
Substrate material selected float glass
Thickness of substrate 1; 1,5; 2,0; 2,5; 3; 4; 5; 6 mm.
Tolerance of glass thickness ±0,1 mm
Length/ width diameter tolerance ±0,1 mm
Planarity 10 µm / 100 mm
Coefficient of thermal exponation 8x10-6/K
Coating vacuum deposited chrome
- Transmission < 1% at 400-900 nm
- Reflection ≤ 60% at 400-900 nm
Pattern:
- sputtered chrome on glass;
- max. line tolerance ±5%;
- graduation accuracy ±1; ±2; ±3 µm (L?1 m); ± 2; ±3 µm (L?3,4 m);
- parallelism graduation to glass edge <0,1 mm per 1m;
- shape of graduation line - rectangular;
- max. possible length of graduation line 15 mm;
|
|
|
A high performance ACU-RITE SENC 50 is a compact, flexible and versatile precision glass scale designed for applications involving limited or confined mounting spaces. A SENC 50 also withstands elements of contamination found in even the harshest machine shop environment. Every ACU-RITE precision glass scale incorporates ACU-RITE's long-standing tradition of quality, reliability, durability and dependability at an affordable price. The SENC 50 precision glass scale is available in travel lengths from 1" - 20", in resolutions of 0.5µm, 1µm, 5µm and with an accuracy of ±3µm/meter.
|
|
senc 50 precision glass scales
A high performance SENC 50 is a compact, flexible and versatile precision glass scale designed for applications involving limited or confined mounting spaces. A SENC 50 also withstands elements of contamination found in even the harshest machine shop environment.
|
|
Company COMPAUT offers a broad range of rules and meters of quality.
The majority of this whole of visualization can be delivered in 24:00
Among these rules, many models are perfectly compatible, as well mechanically as electrically, with the principal standards of the market.
You can thus come to replace those which you usually use, without same having to change the connectors, the whole for a price without comparison.
In addition, company COMPAUT points out that it carries out in its workshops the repair of the meters and the rules, some is the mark, and this within very short times.
N’ thus do not hesitate to entrust to us your defective products for a free estimate.
|
|
The POSIMAG length measuring system comprises an MR scanning head and a magnetic dimensional scale. The position is determined without contact and thus without wear or tear. This measuring setup supports resolutions in the µm range.
POSIMAG is suitable for linear, angluar and speed measurements.
Technical advantages:
Sturdy construction, contact-free and wear-free, shielded metal housing, protection category up to IP67, signal processing as standard with encoders, distance between the MR sensor head and the magentic strip up to 2 mm, measuring lengths of up to 30,000 mm.
Thanks to its special properties, POSIMAG is ideal for many industrial applications in the production of machinery, plants and precision equipment as well as research. For example: Metal and wood processing, manual tasks in handling systems, positional checks for linear units, quality-control systems for sheet metal, punches and presses.
|
|
|
|
see the results for the following category : 
