|
|
Rotary Flying Shear Cut to Length Line
Flying shear type steel coil leveling/shearing cut-to-length lines are ideal for processing soft or highly surface critical materials. In these lines, the strip does not have to stop at any point of time, thus preventing any marking of the strip.
We can also supply the start-stop style cut to length line, cut to length line with edge trimming etc; coil processing line as slitting line, slitting and cut to length line, tension leveling line.
PLEASE WRITE ALL ENQUIRIES ONLY IN ENGLISH!
|
|
Steel Coil Slitting Line
This line is used for slitting steel coils with different specifications (width/thickness) to be needed width strips. The main working flow is: decoiling – leveling – slitting – recoiling
This line is reasonable in layout, easy operation, high level of automation, high productivity which could processing all kinds of CR and HR coil, silicon coil, stainless coil, colored coil, galvanize coil or painted coil. This line is broadly applying in metal plate processing industry, like car, container, household appliance, packing, construction material, etc. This line is composed of coil car, decoiler, slitter, scrap recoiler, shearer cutting coil head or tail, tension pad and recoiler, etc. As well as pendulum middle bridge, pinch device. This line is an auto coil processing equipment which integrates mechanical, electrical, hydraulic, and pneumatic all together.
PLEASE WRITE ALL ENQUIRIES ONLY IN ENGLISH!
|
|
STANDARD LINE: Decoiler - Electronic roll feed - Hydraulic shears - Conveyor belt system for transfer press sheet positioning
SHORT LINE: Decoiler - Straighttener/feeder unit - Hydraulic shears - Conveyor belt system for transfer press sheet positioning
|
|
| ... products without technical information |
| |
|
|
|
|
Multi-Differential Relay – MDR-2 – digital speed and accuracy, maximum reliability
The MDR-2 is a differential current relay intended for protection of a generator against internal short circuits (leaking currents). It is based on a 16-bit digital signal processor providing maximum performance and reliability.
Features include
> Response time 50 ms
> 3-phase detection of current on primary and secondary side of the generator
> Active, adjustable compensation of non-balanced current measurements
> Measuring accuracy 1%
> Stress-free configuration and operation via clear and simple menu structure
> DIN-rail or base-mounting with remote mountable display
> Approved according to LR, GL, etc.
All measured and calculated values are shown in clear text and numbers on the large LCD display (allowing significant savings on purchase and wiring of external meters).
Available options include a block (generator + step-up transformer) protection option and a short-circuit and overcurrent protection option.
|
|
|
|
|
|
RED615, member of ABB's 615 product series, is a phase-segregated two-end line differential protection and control IED perfectly harmonized for utility and industrial power systems, including looped and meshed distribution networks with or without decentralized power generation. Re-engineered from the ground up, the new 615 series has been designed to unleash the full potential of the IEC 61850 standard for communication and interoperability of substation automation equipment.
RED615 provides phase-segregated high speed, longitudinal differential protection for overhead line and cable feeders in distribution networks. Two RED615s interconnected over a communication link form an absolutely selective unit protection scheme. Protection of ring-type and meshed distribution networks generally requires unit protection solutions, also applied in radial networks containing distributed power generation.
Due to the ready-made adaptation of RED615 for the line differential protection, the IED can be rapidly set up and commissioned, once it has been given the application-specific IED settings. If the IED needs to be adapted to the special requirements of the intended application, the flexibility of the RED615 allows the IED's standard signal configuration to be adjusted.
|
|
|
|
|
|
The 7SD60 relay is a numerical current differential protection relay, simple to set, operating in conjunction with the remote station via a two pilot-wire link. It is connected to the primary current transformers via an external summation current transformer. The primary field of application of the relay is protection of short overhead lines and cables with two line ends. However, transformers and reactors may be located within the protection zone.
Function overview
• Current differential protection with external summation current transformer 4AM49
• Suitable for use for distances of 12 km max. via two pilot-wires
• Differential protection can be combined with overcurrent release
• Pilot-wire monitoring function
• Bidirectional remote tripping
• Circuit-breaker intertripping at the remote station
• Seal-in of the TRIP command until manual reset (Lockout function)
• Minimal current transformer requirements due to integrated saturation detector
• Restraint against inrush / undelayed trip for high differential fault currents
• Emergency overcurrent protection
Operational measured values
• Local and remote current
• Differential current
• Restraint current
|
|
|
|
|
|
The SIPROTEC 4 7SA522 is a distance protection relay for transmission lines. This relay provides full-scheme distance protection and incorporates all functions usually required for the protection of a power line. The relay is designed to provide fast and selective fault clearance on transmission and subtransmission cables and overhead lines with or without series capacitor compensation. The power system star point can be solid or resistance grounded (earthed), resonant-earthed via Peterson coil or isolated. The 7SA522 is suitable for single-pole and three-pole tripping applications with and without tele (pilot) protection schemes.
The 7SA522 incorporates several protective functions usually required for transmission line protection.
• High-speed tripping time
• Suitable for cables and overhead lines with or without series capacitor compensation
• Self-setting power swing detection for frequencies up to 7 Hz
• Digital relay-to-relay communication for two and three terminal topologies
• Adaptive auto-reclosure (ADT)
One of the communication interfaces is system interface for connecting to a control system via IEC 61850 Ethernet protocol.
|
|
The 7SD610 relay is a differential protection relay suitable for all types of applications and incorporating all those functions required for differential protection of lines, cables, transformers and busbars. Transformers and compensation coils within the differential protection zone are protected by means of integrated functions, which were previously to be found only in transformer differential protection. It is also well-suited for complex applications such as series and parallel compensation of lines and cables.
It is designed to provide protection for all voltage levels and types of networks; two line ends may lie within the protection zone. The relay features very high-speed and phase-selective short-circuit measurement. The unit is thus suitable for single-phase and three-phase fault clearance.
Digital data communication for differential current measurement is effected via fiber-optic cables, networks or pilot wires connections, so that the line ends can be quite far apart.
|
|
| ... products without technical information |
| |
|
Line Blinds are a simple, cost effective and safe way to close off a pipeline. Developed by SchuF/Fetterolf over 40 years ago for the Chemical and Oil industry, Line Blinds are now an accepted standard. The SchuF line blind valve is particularly easy to use (by one man), achieving a positive shut off without spreading the pipeline. The Cam-Set line blind valve can be changed in less than 60 seconds by turning one bolt or a hand wheel.
|
|
This finely crafted 316L stainless steel 3A concentric check valve offers maximum quality that meets all 3A standards. With a unique clamp design, a simple twist of the wing nut permits quick disassembly without tools. The stainless steel spring in this superior valve assures positive closure and smooth operation. This valve is designed for vertical as well as horizontal applications.
•Suitable for C.I.P.
•Operating pressure to 150 psi
•Temperature from 30°F min. to 225°F max.
•Standard end connection-clamp type
(butt weld & TI-Line upon request)
•Guide finger disc available upon request.
•Standard seals-FDA Viton
(EPDM & other elastomers upon request)
•Internal finish-25 to 30ra average
•Eccentric Type available upon request
•Material Test Reports provided upon
request
|
|
Our valve cluster is customized to fit your needs. With over 40 years as a leading supplier of hygienic stainless steel process equipment, why trust anyone else but Top Line.
*Our in-house valve cluster manufacturing capability reduces installation time on-site
*Pre-wired control tops in either traditional I/O or with using the AS-i network
*Pre-installed air line connections for easy hookup
*Customized log designs for reduced welds
*Professional welds
*Support frames, hangers and drip pans
Please call Top Line @ 814-362-4626 for more information on our valve cluster
|
|
|
|
|
|
One of our key products is the ToP-Flo® Hygienic Diaphragm Valve. Top Line competes with the major suppliers in the industry for weir type diaphragm valves and we have recently gained approval to mark CE on our valves in accordance to the PED on this product line. Pricing is very competitive and our lead times are typically outstanding compared to our competition.
Here are some key standard features to consider for your next requirement:
*Low ferrite DIN 1.4435 316L forged body sizes 1/4"-4" with controlled sulfur content to ASME BPE 0.005-0.017 with 3.1B Material Certification
*Autoclaveable Viton® o-ring sealed 304SS stainless steel manual bonnet with adjustable PPS thermoplastic handwheel
*Thermoplastic piston type pneumatic actuators with your choice of popular controls for feedback (Westlock, StoneL, Burkert, etc.)
*FDA and USP Class VI (Sections 87 & 88) conforming steam grade EPDM, TFM/EPDM, and TFM/Viton® backed diaphragms
*Specialty fabricated sterile access and GMP style valves
*Zero DL machined block body style valve types - Point of Use, T-pattern, Divert style, Tank Bottom, and many others specialties as designed
*Interchangeable diaphragms and topworks with most other manufacturers
*Extensive on the shelf inventory for project support
|
|
|
|
|
|
Top Line Process Equipment Company continues to be a leading supplier of quality hygienic stainless steel valves for over 40 years.
Sanitary Stainless Steel Valves such as:
Butterfly, Ball, Diaphragm, Sample, Divert, Plug, Ball Check, Disk Check
Top Line Process Equipment Company continues to be a leading supplier of quality hygienic stainless steel process equipment for over 40 years.
Our commitment to fine craftsmanship, high quality, unequaled service, and competitive pricing has led to our company's successive years of growth which has placed us among the leaders in our industries.
Top Line Process Equipment Company, originally founded in Janesville, Wisconsin in the 1950's as a provider to the dairy farm industry, is headquartered in Bradford, Pennsylvania, USA. Top Line services the Food, Dairy, Beverage, Cosmetics, Pharmaceutical, Biotechnology and electronics industries.
Top Line primarily markets its products to the Food, Dairy, Beverage, Pharmaceutical, and BioTech Industries through a world-wide network of distributors, large OEM's, and National Accounts. Top Line's involvement with its distributors includes not only providing competitively priced products but to support an ongoing line of communication between ourselves and the ultimate end user of the product. Top Line sales people travel regularly throughout the country making company and product presentations to our distributors and to their processor companies for purposes of specifying, recommending and outlining the benefits of Top Line products. Full factory support is provided to our customers along with customer and project leads.
|
|
Wear- and maintenance-free Line Shafts from R+W
Features of R+W Line Shafts:
Easy assembly and disassembly
Standard lengths up to 6 meters
No intermediate support
|
|
|
TRANSMISSION SHAFTS "Without wear and maintenance" From 10 to 4.000 Nm Diameters of tree from 10 to 100 mm · Assembly and easy disassembling · Standard length until 6m · No the intermediate bearing unit · Optimal compensation of misalignment · Tube intermediate on bearing universal joint ·Weak inertia.
|
|
| ... products without technical information |
| |
KUKA Software
KUKA robots have an infinite variety of potential uses. To allow these to be exploited to the full, KUKA also offers unique software tools.
|
|
|
Motoman PC-based and controller software ensures that your solution operates as efficiently as possible, with operator-friendly features that allow for quick changeover and setup, and complete control over the quality of your product or parts produced.
|
|
|
|
|
|
act/weld enables the user to graphically program a robot from a virtual scene and qualified welding conditions. The parts or assemblies to be welded, together with the tooling, are imported from a 3D CAD system via native or neutral formats (STEP and IGES). A specific simulator enables users to take into account all controller parameters and to simulate the movements of the robot on the screen.
act/weld integrates welder know-how together with programming and simulation tools that enable the user to create his programs optimally, and even to validate the design of a tooling or to study a cell layout.
A post-processor specifically adapted to the controller allows the generation of the programs executed with act/weld in robot language. The integration of functions specific to cell and part-program sizing enables the user to take into account all automatic error correction functions relative to robots (shifting of trajectories via sensing of joint follow-up, laser camera…) and it is possible to upload the modified programs in the robot in order to optimize programming.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
