|
|
|
|
|
|
Precision milling/cutting machine (router) the MECAPRO product line offers a very attractive performance / price ratio.
The wide choice of spindles and functions will meet all requirements regarding the machining of materials in the sectors of advertising, sign, sign board, POP, plastics, aluminium transformation…
Some of materials to be used on (according to the selected spindle and tool) :
- Plastic in rigid plates (PMMA-PC-PS-PVC-ABS..)
- Expanded plastic and alveolar plates
- Rigid foams (PU- PS-…)
- Semi rigid foams (KAPA line®,…)
- Composite materials : Alucobond®, Dibond®, Reynobond®,..
- Wood and by-products.
- Polyester resins.
- Vacuum formed parts in plastic or composite
- Light alloys with Aluminium or copper basis.
- Steel and stainless steel
- Stones, marble, granite (only engraving)
Etc…
Dimensions : 1020 x 1520 mm till 6050 x 2020 mm.
The heavy MECAPLUS range is designed for the intensive machining of aluminium, composites and plastics in strong thickness.
Dimensions : 1000 x 2000 mm till 6100 x 2100 mm.
|
|
DIADISC 45OO
High-tech precision cut-off saw for the laboratory
This new precision cut-off saw has been designed for almost universal
use in laboratories. The standard model is thus optimally equipped.
Special characteristics:
Switch-controlled electrical cutting height adjustment of saw blade
Sliding table, free of play, with prismatic roller guides
Parallel stop with digital measuring system and fine adjustment
Integrated suction arm with brush head. It can be swivelled and adjusted in height
Integrated Micro-atomizer for selective dry or wet operation for highly efficient lubrication and cooling of the saw blade and workpiece
Reserve content level indicator for the micro-atomizer tank
Halogen illuminated work area, with non-dazzle and dimming features
Optimum positioning of operating and display elements
Saw blade and cutting disk depot for 6 tools in the machine (optional)
|
|
DIASLIDE 7OOO
3 axial precision cut-off grinding machine
For materials which are delicate and difficult to machine, such as glass, ceramic and composite materials, but also plastics, steel and non-ferrous metals.
The cutting procedure takes place in several steps governed by defined motions in the Z axis in combination with continuous X stroke (cut-off stroke). Severals consecutive cuts can be made (Y axis).
Very hard material textures can be cut to quality standards, thanks to adjustable machining parameters such as cutting disk speed, X feed velocity, Z motion, selective dry or wet cutting etc.
|
|
|
The MultiCam EZ Knife system was developed to serve markets that require mechanized knife cutting, creasing, and perforation operations. The EZ Knife system supports tangential drag, oscillating and ultrasonic cutting techniques. Choose from many blade types including rotary, spear point, utility, and more. EZ Knife can be purchased as a stand-alone CNC machine based on the MultiCam 1000 Series and 3000 Series motion platforms and can also be added as an option to the 1000, 3000 Router and Plasma Series.
|
|
The Eastman MPC-5000™ Multi-Ply Cutting System is an automated reciprocating straight knife cutter, with conveyor, capable of cutting up to 2 in. (5 cm) of compressed material. Material is automatically conveyed from a spreading table to the cutting area where a polyethylene film automatically covers the spread to create an airtight seal.
- Five-stage vacuum turbine ensures material edge hold down during the cutting process
- Standard reciprocating knife with sharpener assembly and optional single/dual hollow punch pneumatic drill
- Intellicut™ knife control software improves the quality of the cut from top to bottom ply
- Cutting area made up of long-lasting bristle blocks allowing the knife to pierce without damage
- Touch screen display and joystick conveniently located on cutting gantry
|
|
The Eastman MPC-5000™ Multi-Ply Cutting System is an automated reciprocating straight knife cutter, with conveyor, capable of cutting up to 2 in. (5 cm) of compressed material. Material is automatically conveyed from a spreading table to the cutting area where a polyethylene film automatically covers the spread to create an airtight seal.
- Five-stage vacuum turbine ensures material edge hold down during the cutting process
- Standard reciprocating knife with sharpener assembly and optional single/dual hollow punch pneumatic drill
- Intellicut™ knife control software improves the quality of the cut from top to bottom ply
- Cutting area made up of long-lasting bristle blocks allowing the knife to pierce without damage
- Touch screen display and joystick conveniently located on cutting gantry
|
|
|
The MM1 is a computer-controlled machine that automates the cutting of profiles, holes, nozzles and shapes on pipe with diameters from 4" to 16" (100-400 cm). It rotates the pipe on it’s roller bed with a three jaw chuck while simultaneously moving a cutting torch back and forth along the pipe’s axis.
|
|
|
Programmable Gantry System provides coordinated motion in two axis. Can be easily programmed to repeat any contour or pattern for either cutting or welding applications.
|
|
|
|
|
|
APPLICATION Suitable for cutting OPP tape/PVC tape/Electrical tape/Mask tape/Double-side tape/Kraft tape/Cloth tape.
FEATURES Every machine motion is programmable. Operation ease and flexibility.
Silicon lubricating system: Recirculated silicon lubricant prevents adhesives from clinging to the cutting blade, and ensures smooth cuts each and every time.
Silicon lubricating system prevents the blade from sticking on adhesives and allows smooth cutting at all times. Silicon liquid is recirculated.
Each cut is exactly where It's supposed to be cutting head is positioned by a servo motor-ballscren combination along precision slide-heaving rails. Every move is smooth, fast and every accurate-even extremely long moves.
Each cut has our full support: Hydraulic pressure holds upper and lower tape rolls firmly against the cutting blade for maximum stability-no matter how large or small the roll diameter.
Double roll with single circular knives to increase efficiency greatly.
MAIN TECHNICAL PARAMETERS:
Valid Width 1.0M/ 1.3M/ 1.6M
Max. diameter material :150mm
Max. cutting width:3mm
Inside diameter of paper core: 32-76.2mm
Main motor :3HP
Blade drive motor(Servo motor) :5HP
Blade diameter: 200mm / 250mm
Blade speed:1450KG
Machine Dimension(L*W*H) 3790mm*1550mm*1750mm
Optional Parts:
1. Other Size Cutting Shaft: It can be made as per the required core I.D.
2. Cutting Supporter: For supporting log roll when cutting core below 38mm.
3. Air type Cutting Shaft: To improve the cutting accuracy when the tolerance of paper core I.D is too big.
4. Safety Cover: To protect operator during the production, which is compliant to the CE regulation.
|
|
|
|
|
|
APPLICATION This unit is ideal for cutting various log roll materials such as PVC/OPP/PE/Masking tape/Double-side tape/Plastic films...etc.
FEATURES 1. Cutting shaft and circular blade are driven by A.C motor with inverter control, which is able to set running direction obverse/reserve on different requests.
2. Width setting is controlled by servo motor with ball screw and guide rails to make accuracy movement.
3. All functions are operated under LCD touch panel control, which is operator friendly and easy for data setting.
4. Central control system is as PLC unit, it can cut various sizes on one log roll by changing modes automatically.
OPTIONAL PARTS:
1. Other Size Cutting Shaft: It can be made as per the required core I.D.
2. Air type Cutting Shaft: To improve the cutting accuracy when the tolerance of paper core I.D is too big.
3. Safety Cover: To protect operator during the production, this is compliant to the CE regulation.
MAIN TECHNICAL PARAMETERS:
Valid Width:1000mm/1300mm/1600mm
Max. diameter material:270mm (300 mm)
Max. cutting speed:35cuts/min
Inside diameter of paper core:32-76.2mm
Main motor:5 HP
Blade drive motor(Servo motor):3 HP x 6 P
Blade diameter:150-350 mm
Blade speed:360-1800 rpm
Optional Parts:
1. Other Size Cutting Shaft: It can be made as per the required core I.D.
2. Cutting Supporter: For supporting log roll when cutting core below 38mm.
3. Air Type Cutting Shaft: To improve the cutting accuracy when the tolerance of paper core I.D is too big.
4. Safety Cover: To protect operator during the production, this is compliant to the CE regulation.
|
|
Powerful and accurate milling engraving machines. Available with a wide range of optional equipment (lubrication system, tool changer, power spindles, etc) they are designed to meet any production requirements.
Engraving area: IS6000XP 610x410mm (24x16")
Engraving area: IS7000XP 610x815mm (24x32")
Engraving area: IS8000XP 610x1220mm (24x48")
Max spindle clearance: from clamping table 80mm, from vice 140mm.
|
|
|
|
|
|
SteelTailor B-4 CNC Plasma Cutter cuts flat parts out of metal with amazing accuracy and speed.
The bench constituted with a water table and a cross track has a effective cutting area of 1600 mm x 2500 mm. The external dimensions of the bench are 2000 mm x 3500 mm.
The cutting precision is 0.4 mm and the repeatability 0.1 mm. The positioning precision is 0.2 mm
Please, note that the cutting effective area can be adapted to the User’s needs
The cross track is supporting the high control and the plasma torch is light and rigid to accept any sort of plasma torch.
The water level of the cutting table is adjustable.
The weight is 1500 Kg (+/- 20kg) without torch and automatic plasma torch high control system.
The rated power is 2500 W. (380 V, 3 phases, 50 Hz- 220 V 3 phases 60 Hz)
The positioning and cutting speeds are adjustable from 50 mm/min till 10 000 mm/min.
The choice of high quality servomotors associated with reliable reducers provides accurate, high-speed motion. The positioning and cutting operations are really precise and smooth.
SteelTailor B-4 is equipped with an automatic plasma torch high control to ensure the correct position of the plasma torch.
The well proven CNC system used by SteelTailor B-4 makes this Bench CNC Plasma Cutter one of the most reliable machines of the market.
The provided cutting software FastCAM professional version makes the conception, drawing, cutting program very easy. The nesting function optimizes the use of the metal sheet reducing the lost metal sheet areas.
|
|
SteelTailor Power is the newest series of SteelTailor family portable CNC cutting machine. It is an innovative version of portable CNC cutting machine. Based on 3 years experience of our Steeltailor P series portable CNC cutting machines, this new version integrated many new features to better meet the your needs.
SteelTailor is a portable CNC cutting machine, light, handy, and easy to use.
We are ISO 9001:2000 certified and the SteelTailor Portable machine has CE certificate issued by SGS.
Compare with the old machine, there are six place to enhance:
a.)Easier Maintenance
b.)More Stable
c.)Motor Enable/Disable Button
d.)Bigger Cutting Area
e.)Cooling Fan
f.)Faster Cutting Speed
|
|
These versatile GO-FER III Kits make straight line welding and cutting more efficient and economical. Produce machine quality welds and cuts in any plane or position with a portable drive on magnetic track.
Kits are available in specific configurations and are an affordable solution for welding, plasma or oxy-fuel cutting. The kits come complete with a drive, torch holder, 8 foot rail and on/off magnet assemblies. Additional sections of rail, a radius cutting attachment and vacuum cups for non-ferrous applications are also available.
|
|
The PROTEM TT heavy
duty split frame machines can
accurately cut and bevel pipes
and tubes of all materials and
schedules in one simultaneous
operation.
This rugged equipment is easy
and safe to operate. High
speed steel cutting tool bits
provide accurate weld joint
machining while eliminating
flame cutting and grinding
procedures.
A variety of weld joint designs
can be accomplished including
square sever, simple bevel,
double bevel, J prep,
counterbore, compound bevel
and socket weld removal.
|
|
|
|
|
|
Die cutter is designated for cutting out different patterns from hard foils, cardboard and paper. It can also be used for cutting out die stampings, from foils obtained in the vacuum forming process, by means of band punching dies placed on the plywood. It enables the so-called cardboard bending (making incisions) and perforation used in the production of foil and cardboard packing.
Two types of die cutter shafts are used: either two steel shafts or an upper shaft covered with a special material.
Using the first type of shafts, the material that is to be cut out and a separator made of a special plastic is placed on the punching die, which is a very impractical solution for large sizes of cut-out elements.
Using the second type of shafts punching die with a cut-out material is placed directly between die cutter shafts. This method increases the output of the machine. Die cutter shafts are driven by transmission belt, which enables noiseless and steady work.
We manufacture 6 models with different size of shafts:
WWP06KNA-600mm
WWP08KNA-800mm
WWP12KNA-1200mm
WWP15KNA-1500mm
WWP18KNA-1800mm
WWP25KNA-2500mm
-----------------------------------------------
zgrzewarki, wykrawarki, formierki
hf welders, rf welders, roller die cutters
Stretch ceiling machines, Zemat TG
-----------------------------------------------
|
|
The DC Structural Kit provides an
easy-to-use, economical package for trimming, beveling and cutting beams, channels and angles. A structural rail and adaptor for quick set up are included. The unit comes complete -
just add a machine cutting torch.
|
|
Eastman's Static Table Cutting System provides superior cutting performance and increased throughput. Capable of marking, cutting, drilling and punching virtually any flexible material at speeds of up to 60 inches per second (152.4cm/s); the Static table system registers accuracy of +/- .015 inches (.4mm), with higher accuracies available.
- Single or low-ply layer cutting
- Standard three-tool cutting head
- Standard porous plastic table top
- Optional Lexan®, Urethane, PVC and microfiber table tops
- Ideal for prototyping and sample making
Cutting & Plotting Speed: 60 inches per second (152.4cm/s)
Acceleration: 1.3G
Active Cutting Widths (meters): 1.5m, 1.8m, 2.0m, 2.4m, 2.7m, 2.9m
Custom widths available in 6 inch (15.2 cm) increments
Overall Table Lengths (meters): 3.7m, 7.3m, 11.0m, 14.6m, 18.3m
Custom lengths available in 1.2m increments
|
|
|
|
|
|
Automated and Accurate
The DCM boasts a fully automatic load and unload mechanism that can handle up to a half ton of corrugated material. A robust vacuum system with field-proven components feeds sheets from the intake pile as it simultaneously removes finished sheets from the cutting platform. The sheet is precisely loaded into position onto the cutting platform in registration.
DCM Cutting and Plotting Table is all-round
The DCM accommodates an entire family of quick-change creasing, cutting, crushing, and special purpose knife tool inserts. The toolhead cuts at maximum machine speed through a range of substrates up to double wall corrugated. Throughout the run, the DCM maintains close registration and exact depth control, making it ideal for converting silk-screened, flexo or digitally printed products.
A workhorse for Short-Run Converting
Highly cost effective for short runs, from 10 to 300-400 items
- Saves cost and waiting time for a cutting die
- Fast setup and changeover
- Low intervention requirements enable unsupervised overnight jobs
- Leaves high-cost and high-capacity equipment undisturbed
- Based on proven Kongsberg XL technology
|
|
CCT - CNC GLASS CUTTING TABLES (STRAIGHT AND SHAPE)
Cutting size 3.700x2.600 mm or 6.000x3.210 mm. Cutting thickness range 2mm - 19mm. Accuracy± 0,2mm. Cutting speed from 0 to 120 m/min. Total power 10 Kw. Lenght 4.200mm. - Width 3.200mm. - Height 890-950mm. - Weight 2.400 kg. - Noise emission within 80 dB. CE brand.
CNC glass cutting machine for only straight is aviable.
|
|
Koike Aronson offers high quality portable oxy fuel cutting machines designed for applications such as pipe cutting, beam cutting, circle cutting and shape profile cutting. Most of our portable equipment may be used for both oxy fuel bevel cutting and I cutting. Many of our customers affectionately call them a bug, because of their compact size, ability to carry heavy loads and some can even crawl vertically. Portable plasma cutting is also possible with select models.
Each portable cutting machine is designed to provide smooth high quality cuts using Koike cutting tips. Cuts done with a Koike portable make fit up better and prepare the surface properly for welding. Machines such as our IK-12 Max3 can perform a single pass double V-groove bevel cuts, saving time and money.
Contact your Local Sales Representative or your nearest Koike Aronson Distributor to discuss how our equipment can provide immediate cost savings, safety and quality manufacturing.
|
|
|
|
|
|
Stamping/ laser cutting
TruMatic 5000 R
With automatic sheet metal board feed from an integrated sheet metal supply, rotating stamping heads and automatic tool exchange, automatic part disposal and palletization, including leftover grid disposal, small-part sorting, shaping, bending, marking and thread-forming device.
Technical data:
Material Stahl, stainless steel, aluminum
Board dimensions Max. 1250x2500 mm
Max. board weight 200 Kg
Hit rate 1200 strokes/min.
Marking 2800 strokes/min.
Repeat accuracy +/- 0,1 mm
Tool change < 3 seconds
Number of tools 57 +
TruMatic 6000
By combining stamping and laser cutting technologies, the machine effectively and productively handles the increasingly complex processing jobs seen today. Standard contours, such as round or rectangular holes, are handled by the stamping unit with one stroke, as are threads or other shapings. Filigree inner and outer contours are laser-cut with smooth, burr-free edges.
Technical data:
Material Stahl, stainless steel, aluminum
Board dimensions Max. 1500x3000 mm
Max. punching force 220 KN
Max. stroke rate, punching 900 strokes/min.
Max. stroke rate, marking 2800 strokes/min.
Max. axis speed 108 m/min.
|
|
The series of 3-D machines on base of synchronous motor is high-accuracy and reliability machines for pricise drilling, milling and engraving operations. Small dimensions and easy-to-use 3-axes machines are ideal for precision work with various types of materials, including non-ferrous metals, plastics, wood and many others. The primary consequences for us, as manufacturer is to offer future-oriented solutions to problem in 3-axis drilling, milling and engraving fields which are geared to specific customer requirements, grow with changing needs and can be easily put into practice.
Application:
Front panels, housing, printed circuit boards manufacturing, plate, serial numbers, coins, medals, jewelry goods, and 3D model production.
|
|
|
With the WOLFANGEL® Vario Cutter it is possible to cut the fibres with a speed up to 20 m/sec. The length of the fibres can be changed during the cutting process at full speed. With this cutter it is possible to produce fibres with a length between 3 up to 100 mm. The cutter can be driven by either a hydraulic or an electric motor. With the possibility of different combinations between knife and rubber role, it is possible to cut nearly all types of fibres.
|
|
Our AutoCut M3 features a carbon fiber beam, which provides maximum strength, stiffness, and straightness at a minimum weight. The carriage carries a pen and three cutting tools, all on a heavy-duty cutting head.
The M3 is driven by heavy-duty stepping motors with rack and pinion drives on both x and y axes. Repeatable accuracy is 0.02 inches.
A complete, turnkey system includes an integrated vacuum table, gantry and cutting head, and a friendly, easy to use hardware/ software interface.
|
|
The innovative answer to maximize productivity and economic viability:
Maximize productivity: speed up cutting operations by more than 1000%!
With rotocutter® a completely innovative cutting system developed by Walter Möck GmbH, you can work 10 to 15 times faster than with previously known methods. Just 3 minutes is all it takes, for example, to cut a copper ring with an external diameter of 500 mm and a wall thickness of 70 mm, and 4 minutes to cut V4A steel 370 mm in diameter with a wall thickness of 80 mm.
|
|
The GERBERcutter® GTxL is a low-ply conveyorized
system capable of cutting up to 2.5 cm (1 in) of compressed
fabric, using Gerber's state-of-the-art reciprocating knife technology.
A conveyorized cutting table efficiently moves material from a
spreading table or single-ply roll feeder to the cutter and then
directly onto the bundling area.
|
|
|
|
|
|
Acetylene Tag-A-Long™ Kit
Portable, Lightweight Oxy-Acetylene Cutting and Welding Outfit
This completely portable lightweight oxy-acetylene cutting and welding outfit weighs less than 32 lbs. and is ready to go where you need it. Compact design stores easily for road travel or when not in use. Ideal for general maintenance, farming, shop, and home use. All brass Oxygen and Acetylene regulators provide efficient and dependable control of gasses. Ergonomically balanced high density polyethylene carrier is extremely durable and includes hose wrap and covered accessories storage compartment. *Cuts up 6" (153mm) and welds up to 1/2" (13mm) with optional tips.
Medium Duty Outfit
Versatile yet economical,
this "HOBART" outfit includes many features found in more expensive outfits. The HOBART TOUGHCUT™ is perfect for a multitude of applications such as farm, ranch, hobby, automotive, refrigeration, light fabrication and repair. This outfit is designed for use with acetylene fuel gas but can operate on propane by simply changing to propane tips. *Cuts up to 6" (153mm) and welds up to 1/2" (13mm) with optional tips.
|
|
The CoolJet BIE machine cutting torch is equipped with an state-of-the-art valve body. The innovative oxygen cooling gives a better heat conduction and an efficient mixture of the cutting gas. The CoolJet torch delivers the best cutting quality with the highest cutting speeds. It reduces maintenance and eliminates potential safety hazards.
Advantages:
Low maintenance
Lower pre-heat time
Higher cutting speeds
Longer lifetime of torches and nozzles - up to 4 times longer than conventional torches
Can be used on all gas cutting machines
Versatile cutting range from 3 - 300 mm
A low temperature not exceeding 40°C at the mixing unit
Stable flame due to a constant gas flow
Highest operation safety during piercing
Extreme backfire resistance during heavy production cutting
|
|
|
|
