|
|
Powerful and accurate milling engraving machines. Available with a wide range of optional equipment (lubrication system, tool changer, power spindles, etc) they are designed to meet any production requirements.
Engraving area: IS6000XP 610x410mm (24x16")
Engraving area: IS7000XP 610x815mm (24x32")
Engraving area: IS8000XP 610x1220mm (24x48")
Max spindle clearance: from clamping table 80mm, from vice 140mm.
|
|
| 2-axis machine which you can program to run any contour or pattern for both welding and cutting applications. |
|
Manual shape cutting
The P is a lightweight manual ultrasonic device allowing easy shape cutting on any type of synthetic textiles and nonwovens. This handy cutter performs very clean cuts, eliminates frays and creates consistent and clean edges. |
|
HIGH PERFORMANCE ULTRA-SONIC CUTTER :
- Oscillating Frequency : 39.5KHz, Max. Output Power : 30W
- Intricate and accurate cutting with a light touch.
- Machine attachment type is also available. |
|
Range of machines:
- Different types of machines, suitable for small, medium and large series.
- Machines with one or several robots (STAUBLI, ABB...), depending on the production levels required (running in 24/7).
- With manual or automatic loading/unloading of the parts, through double transfer, drawer or rotating table system.
Specificities that make the difference:
- Almost 20 years of experience in waterjet applications.
- Development of machines answering the production needs (specific or standard configurations) : layout, flow of the parts : linear or crossing...).
- Development of peripheral equipments : conveyors for ergonomic loading...
- Complete range of machines and pumps developed by AXIOME FRIMO Group.
- High Pressure Pumps development, piping, spare parts stock...
- Full service thanks to a High Pressure dedicated department.
- User-friendly (2 levels of use : production and intervention : menus developed for the specific needs of the application).
- Parts maintained on the fixture by depression (automatic evacuation of the scraps).
- Remote maintenance and remote supervision of the machines.
- Possibility to connect the machines to a local workshop network. |
|
Powerful and accurate milling engraving machines. Available with a wide range of optional equipment (lubrication system, tool changer, power spindles, etc) they are designed to meet any production requirements.
Engraving area: IS6000XP 610x410mm (24x16")
Engraving area: IS7000XP 610x815mm (24x32")
Engraving area: IS8000XP 610x1220mm (24x48")
Max spindle clearance: from clamping table 80mm, from vice 140mm.
|
|
PART AND TOOL MEASUREMENT APPLICATIONS ON CUTTING MACHINE TOOLS.
Automatic on-machine gauging of workpiece allows time saving in part coordinates setting as well as to detect in real time the result of your machining. Spindle and turret probing systems, provided with several types of wireless transmission systems (radio, infrared, high frequency) are available for this purpose.
Tool setting on lathes and machining centers are provided with dedicated probing solutions, both for automatic and semi-automatic cycles.
Non-contact laser tool checking is also available for tool breakage, tool integrity and tool profile measurement on milling machines and machining centers. |
|
Systems of formulation tools for CNC machining centers
Systems of formulation tools without contact
Imput represents a Rasnel solution Laser for the formulation tools without contact, of tried reliability and with an optimal relationship between quality and price
Settaggio of the tool
Static formulation of the length for drill bits, taps, and other tools
Formulation in spin of the length for milling cutters to smooth and other milling cutters of great dimensions.
Measure of the diameter of rotary tools from 0,2 milimeter
Survey of breach of the tool
Control of the lengths tools in order to make sure that the tools have not been damaged during machining.
Verification tools
IMPUT represents the new solution of formulation tools without contact of Rasnel Laser. The innovative design offers all the advantages to the user, with a already ready product for being mounted to edge machine.
Greater rapidity regarding the inspection to contact
the length and the diameter come set up to the normal speed of cut of the spindle
The survey of the breaches tools can be carried out during the movement cross-sectional express of the machine
Milimeter in any point of the bundle is possible to measure tools with a diameter of single 0.1 laser.
It is possible to set up tools with special coverings, without some risk of damaging of the covering
A Product to `oc for the machine, Rasnel Laser produces to systems laser for formulation tools of various dimensions own for being
Always compatible with the specific requirements of the customer |
|
Stress Relieved and Annealed GA50 Meehanite Castings
Rigid Honeycomb Wall Column Construction
AC Inverter Spindle Drive
High Torque 8:1 Back Gear
Micrometer Stop for Quick Depth Setting of Quill
Halogen Work Lamp
Automatic Lubrication System
Double Lock Device for Axes
Precision Ground Table Surface
Hardened & Ground Way Surfaces with Turcite B
Dovetail Way Surface for X Axis
Square Box Ways for Y Axis and Knee
Internal Knee Rapid Feed Motor
Adjustable Double Nut Design for Minimal Backlash
Chrome Plated Precision Ground Quill
Induction Hardened & Ground Splined Spindle Shaft |
|
Our most popular Knee Mill, combining the patented MillSlide® with our Centurion control, is one of the largest and most powerful Knee Mills in its class!
Oversized 4.125" quill with #40 taper
7.5 HP spindle with back gear
Patented MillSlide® construction offers a robust solution to Z axis travel without compromising manual quill operation
Fully programmable direct drive spindle offers higher spindle speeds, smoother operation and lower maintenance costs
Adjustable ram increases machine "throat" offering large machine capabilities at a small machine price
Rigid tapping available as an option
DRO operation in manual mode
Conversational programming
"Skill Level Select" software
Manual teach
Ground ball screw construction
True encoder positioning feedback
Graphic program verification
One event MDI canned cycles
Knee mills with ball screw driven quill designs are obsolete. Knee mills are for environments needing maximum flexibility. The Milltronics knee mills are simply the most exceptional knee mills ever marketed. The Milltronics patented Millslideâ redefines versatility, rigidity, and operator friendliness, and is the most innovative vertical axis solution ever invented for the knee mill. Simply stated, the Partner VK2, VKM3 and heavy duty VKM4 knee mills with the MillSlideâ are undoubtedly the very best toolroom milling machines in the world. Combined with a unique CNC system with exceptional value at low cost, we are sure you will come to the same conclusion. |
|
| ... products without technical information |
| |
The rotor-stator gap can be adjusted on-the-fly by turning a hand wheel
Changing the gap setting allows the user to modify the shear rate applied to the fluid and achieve the desired process results
Indicator dial defines gap-setting position and ensures process repeatability
This machine is designed to handle a wide range of applications and empowers the user to make simple adjustments to achieve the precise product qualities they require
Vertical or horizontal mounting position makes mill ideal for batch, batch-continuous or in-line applications |
|
| General Purpose - HM Series Supermill - Designed primarily for discrete pass operation with medium to large grinding media size. This series is available in chamber sizes from 0.75 to 200 liters, with a capacity range from about 1.0 GPH to 900 GPH on average. The most economical mill selection offered by Premier, but has a limited range of applications related to the size of the grinding media required for processing. The HM Series can operate well over a wide viscosity range, and is generally used in 1 or 2 pass grinding applications with media size of 0.8mm or larger. There are various options to the HM including stationary front screen, and various materials of construction including plastics, ceramics and composites to suit particular applications. Standard type milling discs, or patented AP type high energy milling discs can be used to optimize mill performance. The basic HM design with Internal Rotating Screen has proven to be a "WORKHORSE" in general purpose media milling applications for over a quarter century |
|
The Premier Submersible Basket Type Media Mill is an exceptionally versatile dispersion system specifically engineered to allow batch and tank size flexibility.
• Independently controlled mixers and milling shaft provide:
-Uniform particle size.
-Consistent temperature control.
-Better flow control.
-Minimal operator interface.
• Capable of particle size reduction in a range of slurry applications.
• Easy clean-up. |
|
Premier's workhorse for the lab, widely used for the processing of small batches in the lab or pilot plant. With mechanical speed drive and 1.5 or 2.0 HP explosion proof motor, this unit has the power to satisfy a wide range of applications where mixing problems exist. The 2500HV breaks up agglomerates and reduces particle size. Increase your mixing efficiency with Premier's line of interchangeable mixing heads.
• Hi-Vis Head
• Simplex Head
• Duplex Head
• Rotor/Stator Head
Heads are also interchangeable with Premier's Model 2005 Lab Dispersator Mixer. |
|
| ... products without technical information |
| |
|
|
see the results for the following category
