Combined lines are the ideal solution for average production rates as they allow to cut blanks or slit coils in one single installation, that is, they can be used as cut-to-length or slitting lines in accordance with the user's needs.
For widths ...
Cutting line for cutting flat rectangular blanks from main coils. For widths of up to 3000 mm, thicknesses of up to 25 mm and speeds of up to 150 m/min.
The ...
Cutting line for cutting flat rectangular blanks from main coils. For widths of up to 3000 mm, thicknesses of up to 25 mm and speeds of up to 150 m/min.
The ...
CNC sawing lines
L-T.50
Cutting line for PVC profiles
Further informations
ELEMENT COMPONENTS
* STEP IN S TRANSLATING LOADING MAGAZINE. The system is used to accumulate profiles and then to transfer them horizontally.
* PUSH PLUS 7000 NUMERICALLY CONTROLLED BAR FEEDER. The PUSH PLUS bar feeder has been designed to push single profiles or packs of profiles into work stations ...
CNC sawung lines
L-T3
Sawing machine with three up-feed blades.
* STEP IN S TRANSLATING LOADING MAGAZINE. The system is used to accumulate profiles and then to transfer them horizontally. It consists of 5 supports with belts running over them fitted with mobile inserts whose position can be changed to accommodate profiles of different diameters. The number of supports can be increased ...
Pipe Cutting is becoming more and more a common procedure in the Structural Steel Industry. Architects ...
mod. MICROFLOC 150 NEW MODEL OMT BIELLA
The MIC150 model ...
LTC 40 is a cutting line with rotating knives for tube diameters from ø12 to ø40. With this system the cut tube is swarfless and with no burrs on the outside, with a low tooling cost. ...
Until now, digital label finishing has been expensive. Complicated. And not particularly well-refined. But no longer.
Primera's ...
WAL-ZER 1 AND WAL-ZER 2
Portable bandsaws, very easy to carry, ...
Compact line allowing the complete machining (drilling, marking and cutting plasma) of sheets averages ...
Jaguar
The all-new Jaguar family of cutting plotters includes the Jaguar II series (JII-61, JII-101S and JII-132S) , and Jaguar IV series (J4-61 ,J4-101S,J4-132S ...
Puma
Powered by a digitally controlled servo system, the Puma III produces eye-catching graphics with up to 23.62 ips (600mm/sec) cutting speed, 400g of ...
Expert 24
Expert 24 is the best choice for beginners and provides sign makers with optimum speed, superior ...
The TK 804/3 model features an automatic machining and cutting system for aluminum profiles and it is designed to minimize the manual intervention of the operator during the machining cycle, allowing the operator only to load/unload profiles.
The machine comprises a multi-spindle combined unit, ...
The TK 804/2 model features an automatic cutting system for aluminum profiles and it is designed to minimize the manual intervention of the operator during the machining cycle, allowing the operator only to load/unload ...
The TK 804/1 model features an automatic machining and cutting system for aluminum profiles and it is designed to minimize the manual intervention of the operator during the machining cycle, allowing the operator only to load/unload profiles.
The machining line can be equipped with optional systems that, in addition to common cutting processes, perform also drilling/milling ...
CNC milling and cutting centre with 28 controlled axes in fully automatic mode, designed for machining profiles made of aluminium, PVC and light alloys in general. Right ...
CNC cutting centre with 3 controlled axes, designed for cutting profiles made of
aluminium, PVC, light alloys ...
* Industrial PC Features
* Modular structure that works at the same time.
* Allows planning of production capacity
* Continous Kaban training and technical services
* Standard ...
* Flexible program structure harmonious with joinery and optimization programs
* Modular structure that works at the same time.
* Allows planning of production capacity
* Standard and high quality production capacity
* Continous Kaban ...
Appropriate to boom machines and portal milling machines.
The TEKA oxygen cutting tables are particularly economic due to low energy input. The very stable construction guarantees that the table does not distort even under high thermal loads.
TEKA oxygen cutting benches possess a sectional suction principle: Inlet ...
Appropriate to boom machines and portal milling machines.
The TEKA oxygen cutting tables are particularly economic due to low energy input. The very stable construction guarantees that the table does not distort even under high thermal loads.
TEKA oxygen cutting benches possess a sectional suction principle: Inlet ...
The flexible saw cell KASTOsawcell is integrated in a UNICOMPACT Honeycomb Storage System; it combines automatic saw cutting with storing, powerful and fast. The reason: The KASTOsawcell works simultaneously ...
- Provides complete multi character marking ...
Oxigas
TITAN - For oxygas cutting technology, for working big thickness sheet metal
The TITAN model, in the Schiavi thermal cutting line, is specifically intended for oxygas cutting technology, ...
SA-78NCE
High Tensile Steel Tube Sawing Machine
Sawing + Deburring + Length Measuring + Stacking
== High Tensile Steel ==
The High Tensile Steel Tube is now widely applied in the global automotive market. In order to achieve
higher fuel efficiency and lowering materials costs, thicker tubes and solid bars have been replaced by
thin wall High Tensile tubes, which offer ...
Manual ultrasonic cutting of high performance fabrics:
- Aramid fabrics
- ...
The Cutter is a newly developed equipment specifically designed for low pagination products (flyers, catalogues for distribution chains, covers) that used ...
Profile machining centre SBZ 630
Thanks to the modular design the SBZ 630 can be equipped to suit ...
These advantages brings the straightening and cut to length line made from following unit
Strip guiding table HFA
Easy adjustable guides made of bearings which assures the optimal in feed of the wide strip into the straightening machine so as the smooth guide from the point of view of surface so as the edges.
3,4,6 or more straightening rolls RM
Supplementary straightening ...
* infeed table with one fixed and one adjustable edge guide
* powered 70-mm diameter feed-cylinder set
* AL m ...
Its components are:
Infeed table
Easily adjusted ball-bearing guides ensure ideal feed of the sheet from the coil to the straightener without damage to surface or edges.
Four- or six-cylinder straightener
An additional shaft guarantees flat sheet all the way to the center ...
