|
|
| The MM1 is a computer-controlled machine that automates the cutting of profiles, holes, nozzles and shapes on pipe with diameters from 4" to 16" (100-400 cm). It rotates the pipe on it’s roller bed with a three jaw chuck while simultaneously moving a cutting torch back and forth along the pipe’s axis. |
|
| Programmable Gantry System provides coordinated motion in two axis. Can be easily programmed to repeat any contour or pattern for either cutting or welding applications. |
|
These versatile GO-FER III Kits make straight line welding and cutting more efficient and economical. Produce machine quality welds and cuts in any plane or position with a portable drive on magnetic track.
Kits are available in specific configurations and are an affordable solution for welding, plasma or oxy-fuel cutting. The kits come complete with a drive, torch holder, 8 foot rail and on/off magnet assemblies. Additional sections of rail, a radius cutting attachment and vacuum cups for non-ferrous applications are also available. |
|
The DC Structural Kit provides an
easy-to-use, economical package for trimming, beveling and cutting beams, channels and angles. A structural rail and adaptor for quick set up are included. The unit comes complete -
just add a machine cutting torch. |
|
Cutting with the speed of light, Laser cutting has a very special place in the BWCutters portfolio offering a specialities less suited to blade cutting such as acrylics and is particularly popular with sailmakers and kitemakers who need to seal the edge of their material as they cut.
BW Cutters have been manufacturing laser cutting for the technical textile industry for over twenty years and still have customers using their original cutters we are specifically a flatbed cutting machine manufacturer and it was BW Cutters that introduced laser cutting into this industry sector.
Our customers are worldwide from USA to China and are used for example by the largest sail making companies in the world, such as Elvstrom-Sobstad and Hoods
One important factor in any Laser Cutting machine is the Laser unit itself the quality and reliability of this is critical and we have a long relationship with our supplier Synrad out of Seatle who offer a very efficient unit within a lighter mass than alternative manufacturers. This enables us to carry the unit on the gantry with no reduction in speed and movement. The fact that we carry the unit horizontally on the gantry then allows us to deliver the cutting beam to the material in the best and most efficient way, basically the distance between the unit and cutting point is only the height of the gantry meaning that the cutting beam length is as short as possible.
Another very important feature with our laser is that we deliver dc voltage directly to the laser head not through an expensive RF cable which would lead to significant power loss and such a long RF cable would can be prone to wear and tear damage. |
|
SCV System, in collaboration with other major enterprises distributes, produces and adapts specific machinery for the moulding of glass.
We supply the machinery as well as guaranteeing the installation, testing, assistance and maintenance of the components, comprising cutting tables, doubleglass lines, vertical and horizontal washing machines, sand blasting machines and others. |
|
SteelTailor B -- the bench type CNC cutting mahcine, is ideal for plasma cutting of medium and thin plates.
|
|
The new assyst/bullmer fabric cutters PROCUT L 5001 for 5 cm and PROCUT XL 7501 for 7,5 cm compressed ply height represent a world-class product in regard to performance, accuracy and reliability. PROCUT L 5001 and PROCUT XL 7501 have a cutting window length of approx. 1.800 mm (optional: 2.500 mm). The Cutters are equipped with linear modules for the X- and Y-axis.
PROCUT L 5001 LV and PROCUT XL 7501 LV (”Long version”) models can be built with bristle conveyors in any desired length up to 12 m , especially in demand in the automotive and furniture industry. The LV-versions differentiate further from the standard types by a cutting bridge with side parts, a roller guide on both sides in x-direction and rack and pinion drive.
Depending on application and material to be cut they achieve the following performance parameters:
* Maximum speed up to 90 m/min.
* Acceleration of up to 1,0 g
* Effective cutting speed of up to 20 m/min. |
|
The High Ply Fabric Cutter TURBOCUT S 2501 CV from assyst-bullmer represents high standards of design and manufacturing in Fabric Cutter-Technology. Like all assyst/bullmer High-Ply Cutters, it cuts fabrics and similar materials with a reciprocating blade which is mounted on an X-Y-drive and tangentially controlled to follow the contour shapes. The result are precisely cut patterns at enormous speed. Affordable without compromising quality was the basic idea for this new development. Turbocut S2501 can be used to cut a wide variety of woven and non-woven textile, textile-like and similar materials , up to 2,5 cm (1") ply height under vacuum compression of the material stack
NEW features:
New, extremely light Turbo beam
Very light , yet sturdy cutting head based on skeleton frame
New high frequency knife quide
The result:
Highest speeds up to 90 m/min
Acceleration up to 1,3 g
Knife frequency up to 7500 rpm
Enormously increased conture speed
Quiet, vibration-free cutting head
Maximum reliability
Accurate cutting contours
Constant accuracy
Low Cost of Ownership
No spare knife drive necessary
The highlights:
Integrated high performance vacuum turbine with only 15 KW
Automatic bristle cleaning during bitefeed
Sharpening device with diamond sharpening wheel for ultimate knife sharpness
Free accessible knife for simple and fast knife change
Additional knife guide for stabilization of knife during sharpening for
smooth cutting edge.
Controller with CNC completely encased in dust protected steel cabinet
Control Software with real time graphic, error menu, operator guide, data management and remote-maintenance |
|
The Sirius 1000 is a high performance high-ply textile cutter with automatic material feed. Owing to the stable knife action and high vacuum power, it is possible to accurately cut coated materials and fleece, cotton, wool, insulating materials and other voluminous materials up to 100 mm in height, compressed under vacuum, at effective cutting speed of up to 20 m per minute.
To ensure excellent cutting quality of even very high stacks , the cutter is characterised by a specially designed vacuum flow, which ensures that the cutting material is subjected to an evenly distributed pressure during compression and therefore there is no displacement within the multilayer pile. To achieve greater efficiency when cutting soft materials, the output of the vacuum pump was also raised so that voluminous materials are compressed down to 30% of their uncompressed height. This means that at the same cutting height more layers can be cut.
The adaptive knife guide in the Z axis (tangential axis)ensures that deflections of the knife caused by the cutting forces during the cutting process are automatically compensated. In this way, a very high degree of cutting accuracy with soft materials ,from the top to the bottom layer is achieved.
These characteristics, combined with the reinforcement of the lateral knife guide, the stable guidance of the knife back and the reinforced pressing plate guide, allow to cut compressed layers of voluminous materials accurately up to a height of 100 mm at effective speeds of up to 20 m per minute.
For the automotive version of the cutter , the drilling machine was reinforced to enable precision bores up to 25 mm to be performed rapidly. |
|
- Twin torch cutting attachment for bevel and strip cutting
- Beam splitting attachment
- Rollers for straight line cuts using bright angle guide
- Track for straight cuts
With optional supply voltages of 110V and 42V and with double insulation as standard, the Quicky® offers a high standard of safety. The speed control is integrated ergonomically into the handle for ease of use.
Simple torch adjustment, both laterally and vertically and a cutting torch which comes as standard with nozzles for up to 100 mm thick Mild Steel cutting, the Quicky® is laid out for optimum performance. A wide range of options ensure flexible use for every application. |
|
| The portable rescue outfit is the perfect equipment for fire departments, search and rescue, military use and other rescue applications. It is light and portable, safe and easy to use. |
|
Die cutter is designated for cutting out different patterns from hard foils, cardboard and paper. It can also be used for cutting out die stampings, from foils obtained in the vacuum forming process, by means of band punching dies placed on the plywood. It enables the so-called cardboard bending (making incisions) and perforation used in the production of foil and cardboard packing.
Two types of die cutter shafts are used: either two steel shafts or an upper shaft covered with a special material.
Using the first type of shafts, the material that is to be cut out and a separator made of a special plastic is placed on the punching die, which is a very impractical solution for large sizes of cut-out elements.
Using the second type of shafts punching die with a cut-out material is placed directly between die cutter shafts. This method increases the output of the machine. Die cutter shafts are driven by transmission belt, which enables noiseless and steady work.
We manufacture 6 models with different size of shafts:
WWP06KNA-600mm
WWP08KNA-800mm
WWP12KNA-1200mm
WWP15KNA-1500mm
WWP18KNA-1800mm
WWP25KNA-2500mm
-----------------------------------------------
zgrzewarki, wykrawarki, formierki
hf welders, rf welders, roller die cutters
Stretch ceiling machines, Zemat TG
----------------------------------------------- |
|
If you cut textiles, flexible materials or composites to form part of your product you need guaranteed accuracy,optimized material usage and the ability to cut on demand. Your material might be heavy or wide, shapes to be cut
might be awkward or large and the traditional methods of manual cutting or press knife cutting force compromises between material use and speed. The PREMIUMCUT II cuts your components straight from the roll in whatever
quantity you require when you cut. The Premiumcut II is a high performance cutter that includes all the benefits for which assyst/bullmer is well known; excellent engineering and reliability coupled with the lowest possible running
costs. Models with a working width from 1600 mm up to 3200 mm in 200 mm steps are available as standard.
Standard length of the cutting window is 2000 mm on the conveyorised Premiumcut, special lengths on request (Static bed cutting up to 12000 mm also available). The continuous process of material flow (feeding, loading,
cutting, sorting) is supported by the integrated conveyor belt of the PREMIUMCUT II as well as by an optional automatic material feeding device. The control software is simple to operate and optimizes the capability of the cutter.
The standard equipment of the PREMIUMCUT II includes a base module cutting head which independently supports the most important inserts such as pneumatic high stroke tool, electric high vibration tool and electric rotary tool. The exchange can be executed very easily by hand without using any auxiliary tools. A Pen and Laserpointer are part of the base module-configuration. Depending on the application there are 7 additional module extensions available.
|
|
Laser technology is becoming very popular for the processing of woven or non-woven (synthetic) fabrics or fibrous materials for example:
- Industrial filters
- Sport and leisure clothing, protective suits
- Automobile fittings (airbags, furnishing, etc.).
The laser beam works without contact and without tool erosion. There is no distortion by a mechanical tool. The fused edges do not fray. No seaming is necessary with most synthetic textiles.
|
|
Powerful and accurate milling engraving machines. Available with a wide range of optional equipment (lubrication system, tool changer, power spindles, etc) they are designed to meet any production requirements.
Engraving area: IS6000XP 610x410mm (24x16")
Engraving area: IS7000XP 610x815mm (24x32")
Engraving area: IS8000XP 610x1220mm (24x48")
Max spindle clearance: from clamping table 80mm, from vice 140mm.
|
|
APPLICATION This unit is ideal for cutting various log roll materials such as PVC/OPP/PE/Masking tape/Double-side tape/Plastic films%u2026etc.
FEATURES 1. Cutting shaft and circular blade are driven by A.C motor with inverter control, which is able to set running direction obverse/reserve on different requests.
2. Width setting is controlled by servo motor with ball screw and guide rails to make accuracy movement.
3. All functions are operated under LCD touch panel control, which is operator friendly and easy for data setting.
4. Central control system is as PLC unit, it can cut various sizes on one log roll by changing modes automatically.
OPTIONAL PARTS:
1. Other Size Cutting Shaft: It can be made as per the required core I.D.
2. Air type Cutting Shaft: To improve the cutting accuracy when the tolerance of paper core I.D is too big.
3. Safety Cover: To protect operator during the production, this is compliant to the CE regulation.
MAIN TECHNICAL PARAMETERS:
Valid Width:1000mm/1300mm/1600mm
Max. diameter material:270mm (300 mm)
Max. cutting speed:35cuts/min
Inside diameter of paper core:32-76.2mm
Main motor:5 HP
Blade drive motor(Servo motor):3 HP x 6 P
Blade diameter:150-350 mm
Blade speed:360-1800 rpm
Optional Parts:
1. Other Size Cutting Shaft: It can be made as per the required core I.D.
2. Cutting Supporter: For supporting log roll when cutting core below 38mm.
3. Air Type Cutting Shaft: To improve the cutting accuracy when the tolerance of paper core I.D is too big.
4. Safety Cover: To protect operator during the production, this is compliant to the CE regulation. |
|
Koike Aronson offers one of the industry's most extensive lines of cutting machines in both Gantry and Cantilever styles.
Choose from oxyfuel, plasma, or laser systems for optimum performance, then match the cutter with one of our CNC controls for added precision and versatility.
|
|
Koike Aronson offers a wide variety of portable equipment to handle both straight line and circle cutting. They all have unique features that are sure to suite your needs.
The Handy Auto series machines provide endless possibilities with the unique ability to make clean, accurate cuts by motorizing the hand cutting method. The cuts made by the Handy Auto are so clean that secondary preparation is not required for most applications. This saves you time and the cost of grinding later.
IK series
These two magnetic template-cutting machines offer many options to produce high quality cutting. |
|
| The ultrasonic cutting units of RINCO ULTRASONICS AG are suitable for cutting operations of textiles and fabrics with a minimum of 50% synthetic fibre content, for packaging and food. Together with the cutting station which is available both as stand-alone and as table version, RINCO offers components for special purpose machines as well as the ultrasonic hand cutting unit HC35-3. |
|
The ultrasound system consists ol a high-frequency generator that modifies the frequency of the mains power supply from 50 Hz to 20.000 Hz (cycles/second). The caWe from the generator is then connected to a transducer that converts the electrical signal at 20.000 Hz to a mechanical signal (oscillating vibration). At the tip of this signal is a titanium blade, designed with a resonance frequency that coincides with the vibration frequency from the transducer. This means that the titanium blade vibrates in a balanced manner and can cut the products smoothly, avoiding product adhesions and achieving a clean cut.
This system is usually part of a cutting table that positions the products for cutting (for example, cakes and mousses) and controls the generation of figures, which can be square, rectangular, rhomboid, triangular, etc. |
|
Manual straight cutting
The T is an easy-to-handle manual device performing straight cuts on any thermofusible fabric. |
|
| The MultiCam EZ Knife system was developed to serve markets that require mechanized knife cutting, creasing, and perforation operations. The EZ Knife system supports tangential drag, oscillating and ultrasonic cutting techniques. Choose from many blade types including rotary, spear point, utility, and more. EZ Knife can be purchased as a stand-alone CNC machine based on the MultiCam 1000 Series and 3000 Series motion platforms and can also be added as an option to the 1000, 3000 Router and Plasma Series. |
|
The SM.320.TA version with its conveyor belt, enables continuous work by loading the material to be processed and unloading the processed material from the worktop with no need for the operator to step in.
As the other machines in the FULLCUT range, the SM.320.TA can be equipped with up to six tools at the same time: laser, ultrasonic, a set of three wheel blade holders , a marker and a milling cutter. This makes it possible to switch from one material to another simply by selecting the tool to be used via the software. This makes the list of materials that can be cut on this type of machine endless.
A strong point of the machine is the possibility of customizing it according to customer’s needs. This versatility is ensured since both the machines and the software are manufactured and designed entirely by SMRE. This enables customised applications to be developed very rapidly for each customer. |
|
| Whether as pure autogenous plant or combined with plasma, find these particularly robust and nevertheless dynamic flame cutting machines their employment in the classical to heavy metalworking. Equipped with most modern gas technology e.g. different materials and material thicknesses can be cut fully automatic by the call of the parameters over the MicroStep data base. |
|
|
|
