|
|
Manual shape cutting
The P is a lightweight manual ultrasonic device allowing easy shape cutting on any type of synthetic textiles and nonwovens. This handy cutter performs very clean cuts, eliminates frays and creates consistent and clean edges.
Manual straight cutting
The T is an easy-to-handle manual device performing straight cuts on any thermofusible fabric.
|
|
|
2-axis machine which you can program to run any contour or pattern for both welding and cutting applications.
|
|
We are pleased to present our newest cutter, the AutoCut X5. Driven by Servo motors, the X5 offers you significantly faster acceleration along with faster overall cutting speed, meaning greater efficiency and improved throughput for your company.
In fact, while our M3 model is still one of the best and most reliable machines available in the industry, our new X5 can cut up to 60% more in the same time! Repeatable accuracy is 0.02 inches.
A complete, turnkey system includes an integrated vacuum table, gantry and cutting head, and a friendly, easy to use hardware/ software interface.
|
|
| ... products without technical information |
| |
|
Tough, reliable and easy to use. Vemeer is the inventor and the world's leading seller of stump-cutting equipment. The reason is simple - Vermeer offers machines that are tough, reliable and easy to operate. With features like the exclusive AutoSweep system, beltless cutter-wheel drive systems, Pro Series teeth and state-of-the-art remote controls, the Vermeer name has become synonymous with innovation. Proven on virtually every type of hardwood stump, the Vermeer line of labor-saving stump cutters lets you do it all.
|
|
Features:
- Cutterwheel is equiped with FERMEX teeth
- Very solid construction
Advantages:
- Easy to operate
- Easy to transport
- Long lifetime
Benefits:
- 30 % more productivity
Additionally to the well known piling machines Vermeer MT also supplies auxiliary equipment. Examples are the Easy Cutter (pipe cutting system), drop weights (750 - 4000 kg class,with or without connections),
tubes (114 up to 508 mm) and swaging units.
Swaging units expand tubes in such a way that the original
tube size fits into the swaged end giving the connection a
high quality after welding it.
It also saves labour against other coupling methods like connection rings.
The TU-series Vermeer MT swaging units can be supplied as Standard
and as a Wide Range model.
Both systems are suitable for swaging pipes that are regularly used in the foundation industries.
|
|
Features:
- Cutterwheel is hydraulicly driven
- Cutterwheel is equiped with FERMEX teeth
- Optimal balance between motor, pump, hydraulic motor
and cutterwheel
Advantages:
- Easy to use
- Solid construction
- Highest periphirical speed
Benefits:
- up to 70% more productivity
- 20% less cost
FERMEX, manufactured by Vermeer MT, has 6 standard models of stump cutters.
It is possible to chose from hydraulicaly or mechanicaly driven machines, and machines which use the P.T.O. of a tractor or it's own power unit.
FERMEX stump cutters are designed and built for the professional user.
The machines are robust, have few wear parts and are making a high production.
The applied teeth/ pockets system results in quick mounting because
no gauges are required.
The locking of the teeth combined with the pockets lead to safe usage.
The Vermeer MT teeth are provided with tungsten carabide plates that extend the lifetime.
|
|
| ... products without technical information |
| |
|
Rugged, reliable and powerful, Vemeer concrete cutters can be found working repair and replacement projects on streets and roadways worldwide. Vermeer concrete cutters are perfect for patch and joint placement on interstates, streets and highways. Other applications include cutting highway and bridge relief joints, creating lateral ditches for highway drainage, work on street and airport lighting projects, installation of airport guidance systems and demolition work for widening shoulders and airport pads.
|
|
|
|
|
|
RZ 111 - ASPHALT AND CONCRETE CUTTERS
Cutting depth mm 110
Blade diameter mm 300 (350)
Engine HONDA Type GX 160
Max. engine power @ RPM kW 4,0/3600
Travel push
Fastening hole dia. mm 25,4
Max. no-load spindle speed min-1 3600
Water tank capacity l 15
Water supply aqua spojka
Weight kg 55
RZ 120 - ASPHALT AND CONCRETE CUTTERS
Cutting depth mm 120
Blade diameter mm 350
Engine HONDA Type GX 270
Max. engine power @ RPM kW 6,6/3600
Travel push
Fastening hole dia. mm 25,4
Max. no-load spindle speed min-1 3400
Water tank capacity l 20
Water supply aqua spojka
Weight kg 95
RZ 121 - ASPHALT AND CONCRETE CUTTERS
Cutting depth mm 120
Blade diameter mm 350
Engine HONDA Type GX 270
Max. engine power @ RPM kW 6,6/3600
Travel push
Fastening hole dia. mm 25,4
Max. no-load spindle speed min-1 3400
Water tank capacity l 20
Water supply aqua spojka
Weight kg 72
RZ 170 - ASPHALT AND CONCRETE CUTTERS
Cutting depth mm 170
Blade diameter mm 450
Engine HONDA Type GX 390
Max. engine power @ RPM kW 9,6/3600
Travel push
Fastening hole dia. mm 25,4
Max. no-load spindle speed min-1 2800
Water tank capacity l 20
Water supply aqua spojka
Weight kg 106
RZ 171 - ASPHALT AND CONCRETE CUTTERS
Cutting depth mm 170
Blade diameter mm 450
Engine HONDA Type GX 390
Max. engine power @ RPM kW 9,6/3600
Travel ruční
Fastening hole dia. mm 25,4
Max. no-load spindle speed min-1 2800
Water tank capacity l 20
Water supply aqua spojka
Weight kg 78
|
|
|
Floor Saw Blades from TYROLIT and Floor Sawing Machines from TYROLIT Hydrostress - an unbeatable combination.
|
|
|
|
|
|
SHARK CUTTER SUCTION DREDGE
Dredging Supply Company's Shark Class Cutter Suction Dredge features a conventional dredge-operating configuration with modular design for ease of transportation. With standard discharge sizes ranging from 10-inch through 24-inch, our Shark dredges are most commonly used by sand & gravel producers and contractors. The tough yet portable design offers many rewards for the end user. With the proven reliability of the Shark Class cutter suction dredge, the end user can expect a very long life expectancy for this type of equipment. The Shark dredge will provide a high percentage of uptime and availability, which makes it one of the best selling models in the world!
DSC's Shark Class Dredge features standardized systems throughout all of the various sizes and configurations. The operating systems are all PLC based and offer the operator an ergonomic and user-friendly control panel. With the simple touch of a few switches, you are off and dredging. The Shark dredge also features power up/down spud systems with API rated winch drums for proper cable storage.
|
|
|
The highly polished open flute not only allows for easier chip formation and evacuation, but also provides for a sharper cutting edge that delivers a better edge finish on a variety of materials. Our premium micro grain carbide allows for superb wear resistance and tool strength. Special point geometry contributes to improved bottom finish and plunging capabilities. Tools are available in upcut and downcut versions from 1/16" through 3/8" diameters.
|
|
Onsrud is proud to announce the launch of our NEW taper tools. These cutters are made of premium micro-grain carbide and are available in a variety of sizes, lengths, and angles.
The tools are available with a ball nose tip giving them the flexibility to cut draft angles in molds to 3D decorative profiles. The cutting geometry will allow them to cut a variety of materials and produce a good edge finish.
Custom tools can be made upon request.
Material: Wood, Plastic, Aluminum
|
|
The cutter pumps of the series SFC are capable of cutting aluminum chips and similar materials and pumping of these materials along with the coolant fluid. An agitator located at the pump suction helps to break up and separate any large bundles of chips or birds nests which reach the pump suction.
Axial / semi-open impellers
Large chips
25 ... 1800 l/min
4 ... 35 m
|
|
MultiStream Pumps with adjustible single-channel impeller
MultiStream-pumps are suitable for handling effluent or sewage in municipal and industrial pumping stations as well as in surface water drainage applications. The smaller types are also used very successfully as portable units to deal with emergency situations. The sewage pumps UAK are suitable for handling water without faeces. In hazardous locations or in case the pumps are connected to the public sewerage we recommend our explosionproof sewage pumps UFK
Recommended for:
- effluent which contains fibrous matter
- mixed water
- effluent which contains solids
- rainwater
- raw effluent
- raw sludge
|
|
| ... products without technical information |
| |
Function
The ALD 01 laser depaneling system is equipped with a rotary table system for optimum separation of the individual processing stages. This method allows parallel processing of the individual tasks. Consequently, the only times relevant for the cycle time, are the time for the longest individual stage plus the time taken for the table to rotate from one position to another.
1. Handover of the panel from the inlet conveyor to the first position on the rotary table
2. Panel routing
3. Loading of individual routed PCBs onto the outlet conveyor
4. Tipping of remaining panel waste into the integrated waste container
The panel is transferred from the inlet conveyor to the first position on the turntable by means of a pneumatic X/Y/Z portal gripper system. The routing process utilizes a CO² Laser.
|
|
Laser Depanelizer for stress free and flexible Cutting of PCB Panels
- Depanelizing with Laser Technology
- Stress- and dust free Process
- Low Process cycles, high throughput
- Simple Fixtures
- Cutting and Marking possible
- Cutting any shapes
|
|
TF: automatic cutters for custom-sized spools of PS film, thickness range: min 0.15 max.0.3 mm.
Final sheet size: min 400x 400, max 1000x1500 mm.
A V-shaped corner-cutting system is available on request.
The cutter is electronically controlled from a panel with auto, single, manual and double cycles, the latter indispensable to obtain lenghts of more than 800 mm
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
S0 and S0E
For single lip cutters and much more!
- Powerful drive
- Integrated wheel dressing unit
- Precise grinding spindle
- Versatile swivelling and setting options
- Optional: 1:20 microscope to drastically cut setting time
- Solid machine design for long-time precision
- Dust protection hood as standard feature for easy vacuum cleaner connection (integrated dust extraction for the S0E)
- Bench-type or floor-type version
- Great variety of accessories
|
|
Better cutting - manual cutting systems
the ergonomically formed cutting carriage with cutter cassette cuts with absolute safety in both directions.
The cutter cassette can be replaced in one easy operation.
cassette with circular knife for paper, corrugated board etc.
cassette with blade for film
for use with roll material, such as paper, corrugated board or foil, we offer you the time-tested cutting systems with dispenser
freestanding or directly at the packing location
with changeable cutting cassette
standard cutting widths up to 160 cm, vertical cutting stand up to 200 cm
|
|
|
|
see the results for the following category : 
