|
|
Designed to reduce conducted mains borne EMI, this extensive range provides many solutions to EMI problems. To meet individual design requirements the filters are available with two attenuation options – standard and medical. Current ratings are from 1 to 10 amps with single or twin fused types also available.
The choice of mounting options will suit most applications with flange, snap to panel or base/bulkhead.
|
|
|
|
|
|
Complementing our premium line of EMI filtered and unfiltered connectors, we offer a variety of specialty filtered connectors, and a wide range of value-added harnessing products and services for all your commercial, industrial and military needs. With a complete line of compact and extended shell filter connectors, Spectrum provides vast design flexibility to reduce the amount of real estate required within a product enclosure.
Our unfiltered connectors are built to meet various environmental and mechanical requirements as well as MIL specifications, providing you with a custom shell to fit your space. Power, signal and coax line combinations are available, each built with integral strain relief to ensure a high quality connector.
To meet the highest workmanship standards, our MIL-STD-2000 certified operators and manufacturing engineers work in well-equipped, modern facilities to build and design tooling and fixturing of the tightest tolerance. By providing interconnect assemblies, our custom harnessing products are in compliance with all requirements. Services include lead wire preparation, soldering and tinning, marking and ribbon cable processing.
• Custom configurations of filtered MIL-STD connectors available
• Specialty EMI filtered and unfiltered connectors
• Tubular and planar filtered arrays using Pi, LC, T and C circuits with TVS protection available
• Effective insertion loss from 1MHz to 18GHz with proper installation
• Connector temperature range of -55°C to +125°C
• All harnessing built in accordance with IPC-A-610 and J-Std-001
• Harnessing temperature range of -55°C to +200°C
|
|
|
Pasternack's DC Blocks are primarily used to protect DC-sensitive RF circuitry in applications where DC power might exist on a transmission line or where a DC power spike might be generated. The DC Blocks operate to 18 GHz and are available in inner-only, outer-only and inner/outer DC block configurations.
|
|
Eliminates the problem of conducted EMI in data line applications
Provide common- and differential-mode noise attenuation.Reduce noise by a factor of 32 from 15 MHz to 300 MHz.High current (500 mA) versions available.300 Vrms isolation.Excellent environmental stability and low cost Available in 4, 3 and 2 line versions
Consider our CCDLF series for 10 and 8 line applications
RoHS-compliant. 260°C compatible. Tin-silver-copper over tin over nickel over phos bronze terminations.
Samples of all values plus samples of CCDLF and through-hole versions are available in Coilcraft Designer's Kit D303
|
|
|
A specialized range of I/O connectors equipped with capacitive filter elements enabling engineers to design network and communications equipment to meet FCC and other national standards governing the level of emissions of RFI and EMI energy.
|
|
Amphenol EMI / EMP Protection connectors offer the versatility of standard connectors with EMI / EMP protection for sensitive circuits. Internal housing of the EMI / EMP devices eliminates costly and bulky exterior discrete protection devices.
Virtually all major MIL-Spec cylindricals can be incorporated with filter devices :
- MIL-DTL-38999 - MIL-DTL-5015
- MIL-C-26482 - MIL-C-27599
- MIL-C-83723 - MIL-C-26500
Amphenol offers filter connectors that include :
- EMP protection using diodes
- EMP protection utilizing metal oxide varistors (MOV’s)
- Filtered plug connectors
- Filtered hermetic connectors
- Programmable filtered connectors with rear removable and rear insertable crimp contacts
- Filter connectors with ESD protection
- Combinations of filtering devices within one connector package
Advantages of Filter Connectors :
- Reduction in overall weight and space with the elimination of external filter circuits
- Reduction of solder junctions
|
|
Flip Mirror Holder KSH 90
The swing leaf bears a wobble plate with an adjustment range of ± 0.5° and an aperture of 2". Optics with a thickness > 12 mm (normally 2" mirrors) are fixed with a plastic screw.
Optical components (such as mirrors and beam splitting paltes) having a thickness of only 10 mm can be pressed aganst three stops with the enclosed two clamping shoes and thus fixed.
The swing angle is 45°, the repeatability < 100 µrad. The swing time of the motorized version is about 1 s.
- for use with SYS 90
- black anodized aluminium alloy
- mountable onto pin or slide
- manual operation or motorized
|
|
The Laser Mech Lens Mounting System solves the problem of lens removal for replacement and inspection. By using a simple cartridge mounted lens inserted into a side slot in a permanently positioned manifold block, the problems of the traditional threaded, axially inserted lenses are avoided. This innovative mounting method allows removal and replacement of the lens in seconds with no readjustment of the optical alignment and without the removal, replacement or disassembly of any other part of the optical system.
Each assembly consists of a lens mount manifold block with very fine, adjustable lens centering screws and a spring-loaded, lens holder assembly to hold the lens. The lens holder contains all the seals necessary to pressurize the space beneath the lens for use with the Gas Jet Manifold.
|
|
As you scan through our various mounts we have a selection of Single Circular Filter Wheel Mounts, a Universal Stand Mount, Compensated Circular Filter Mounts & a 8 Position Filter Mount.
* Compensated Linear Filter Mounts
* Degree Scales
* Mounts
* Storage Boxes
|
|
|
ROLYN Mirror Mounts are designed to give the very best combination of economy and performance. There is no glass-to-glass contact. Clear aperture obscuration caused by the plastic mirror holders is minimal. These three holders form an adjustable rigid orthogonal kinematic mount for the mirror which resists vibration and handling. Black anodizing minimizes reflections. Mirrors are not supplied with the mount.
|
|
The Camfil Farr Pharmaseal provides cleanroom level air filtration for pharmaceutical or biotechnology facilities as well as any oterh facility where clean space ia a manufacturing or health-related requirement.
Housing is leak tested at 3.0" w.g. to ensure the housing will not leak under normal operating conditions. The housing is also visually inspected and tested for filter fit.
Is manufactured in various configurations from 0.63 aluminum or 16-gauge stainless steel.
May be installed in a T-bar ceiling or flush mounted in a solid ceiling.
|
|
The Defensor PH15 and PH 27 generate humidity on the basis of the evaporator principle: Air absorbs moisture when passing through the damp mat and is then released into the room air through the air cleansing filter set, practically free of bacteria. Dust and other particles greater than 0.05 micrometers are filtered out. Environment gases and odours are filtered out.
• Automatic mode for energy saving
• Easy and convenient handling
• Air-purifying with Quattro filter system
• Direct connection for water supply
• Low running noise
• Turnkey unit, no installation outlay
|
|
HOOD-IT
Terminal Filtration Unit designed for installation in the most common prefabricated false ceilings, ideal for the creation of small/medium controlled contamination areas.
Applications:
Clean Rooms for the Electronic, Optical, Mechanical, Aerospace, Pharmaceutical, Medical industries and Hospitals.
|
|
AIR-1-HT
Independent filter fan units designed for large Sterile Rooms and/or Laminated Airflow Systems, where the levels of cleanliness, noise and absorption are extremely strict.
The AIR-1-HT series Filter Fan Units offer cutting edge technology for modern Sterile Rooms.
Appliances:
Sterile Rooms and Laminar Airflow Systems for the Microelectronic, Electronic, Optical, Mechanical, Aerospace, Pharmaceutical, Medical industries and Hospitals.
|
|
Flip Mirror Holder KSH 90
The swing leaf bears a wobble plate with an adjustment range of ± 0.5° and an aperture of 2". Optics with a thickness > 12 mm (normally 2" mirrors) are fixed with a plastic screw.
Optical components (such as mirrors and beam splitting paltes) having a thickness of only 10 mm can be pressed aganst three stops with the enclosed two clamping shoes and thus fixed.
The swing angle is 45°, the repeatability < 100 µrad. The swing time of the motorized version is about 1 s.
- for use with SYS 90
- black anodized aluminium alloy
- mountable onto pin or slide
- manual operation or motorized
|
|
The Laser Mech Lens Mounting System solves the problem of lens removal for replacement and inspection. By using a simple cartridge mounted lens inserted into a side slot in a permanently positioned manifold block, the problems of the traditional threaded, axially inserted lenses are avoided. This innovative mounting method allows removal and replacement of the lens in seconds with no readjustment of the optical alignment and without the removal, replacement or disassembly of any other part of the optical system.
Each assembly consists of a lens mount manifold block with very fine, adjustable lens centering screws and a spring-loaded, lens holder assembly to hold the lens. The lens holder contains all the seals necessary to pressurize the space beneath the lens for use with the Gas Jet Manifold.
|
|
As you scan through our various mounts we have a selection of Single Circular Filter Wheel Mounts, a Universal Stand Mount, Compensated Circular Filter Mounts & a 8 Position Filter Mount.
* Compensated Linear Filter Mounts
* Degree Scales
* Mounts
* Storage Boxes
|
|
|
ROLYN Mirror Mounts are designed to give the very best combination of economy and performance. There is no glass-to-glass contact. Clear aperture obscuration caused by the plastic mirror holders is minimal. These three holders form an adjustable rigid orthogonal kinematic mount for the mirror which resists vibration and handling. Black anodizing minimizes reflections. Mirrors are not supplied with the mount.
|
|
|
|
|
|
Twinkle, the dedicated fluorometer from BERTHOLD TECHNOLOGIES, has been designed without compromise for a variety of measurement modes to support academic and industrial research centres.
Kinetics, scanning, dual ratio measurements plus top and bottom reading make Twinkle a valuable instrument for any researcher using fluorescence in life science.
The bottom reading is instrument of choice for measurements of adherent cells, coloured medium and lids to achieve the most efficient detection. The instrument can be equipped with temperature control to establish ideal conditions for all cell based applications.
MikroWin software allows easy measurement of different plate formats, e.g. up to 384 well microplates, filters, petri dishes or Terasaki plates. The high quality design is well suited for sensitive FRET assays.
The Twinkle provides highest sensitivity due to Single Photon Counting technology and extremely low noise Photomultiplier. For excitation a Tungsten halogen lamp is used. The instrument is standard equipped with filter pairs for FITC and Umbelliferone.
|
|
Jenway's new range of filter fluorimeters include three models covering a broad range of applications and options.
Intelligent Filter Modules ensure that the correct filters are always used for your easily defined methods.
Simple raw fluorescence measurements can be made or calibration against one, or up to six, standards will ensure a wide operating range and accurate results in your chosen units of measurement.
Accessories include an electrically heated, temperature controlled sample holder and an automatic sipper pump for discrete or continuous sampling.
These fluorimeters will find application in many applications including water and environmental analysis, molecular biology (DNA/RNA), food and drink analysis and many more...
|
|
Output inverter choke
Class F insulation system
Application :
UPS from 10kW up to 200kW
Gamme :
Inductance value from 10uH up to 2mH
Current range from 15A up to 200A
|
|
PV inverter choke
Application :
PV inverter from 2kW up to 30kW
Gamme :
Current range from 5A up to 50A
|
|
|
In addition to Capacitors, EMI Filters (RFI Filters, EMC Filters) and EMC Testing, LCR also designs, manufactures and supplies a comprehensive range of Coils, HF Chokes and Inductors. Where space is a premium and cost is critical, LCR components can solve your EMI problem at the board level. Whether you use one of our many standard off-the-shelf items or one tailor- made to your specific needs, LCR can offer them cost-effectively and quickly.
|
|
EMI/RFI Filtered Connectors
Various - EMI/RFI Filtered ConnectorsFilter Connectors. The concern over interference in sophisticated electronic equipment, now operating on lower power levels, has seen an increased use of in-line filter devices to suppress either the effect of externally generated interference, or to reduce emissions from the equipment itself.
AB Connectors have engineered solutions which can be adapted to may of the market standard connector ranges, making retro-fitting to existing equipment a quick and effective solution, to EMI/RFI problems.
As an alternative AB Connectors produce Interface Filter Adaptors which simply plug in between existing connectors, thereby making modification in the field a simple and cost effective option.
Connector Types
MIL-C-5015
MIL-C-38999
MIL-C-26482 Series 1
Further details on the Various range available on request from the factory.
|
|
|
|
see the results for the following category : 
