|
|
The testing device 92-7G/-7M is concieved for the control via an external PC/PLC. Therefore display and operating devices were renounced. The modular design of the testing instrument permits an optimal adaptation to the individual requirements of the user. Uneeded functions or equipment are omitted. Together with the device ELABO offers an efficient software package.
HV
The high-voltage is produced primarily over an internal electronic HV-source with a high clock frequency and regulated within less 10 ms. Because of the internal source a low residual ripple < 3% (accordingto VDE 0432-1) can be realised, also for DC tests with high currents. The synchronisation can be carried out on an external signal, on the mains frequency or internal (free-running). An electronic voltage ramp mode (voltage ramp up and ramp down) allows for tests of electronic equipment, at which a non-destructive test can only be carried out if the test voltage is increased slowly or for test items with high self-capacitances. The integrated residual voltage measurement assures a safe discharge of thecapacitances of the test items.
Insulation resistance
Insulation resistance measurement with voltages from 500 V up to 8000 V DC at full HV-current are possible. The resistance measurement is carried out together with the high voltage test at the sametime.
PE resistance
Measuring of the PE resistance or the voltage drop at the protective earth conductor through fully electronicregulated programmable test current 10 ... 32 A at an AC voltage of 6 or 12 V. |
|
EurotestXA is the top of the range installation safety tester with automated testing based on patent pending AUTO SEQUENCE®.
Because of the need to be efficient, fast and competitive but still reliable and concentrated on safety, all the technical content and innovations under AUTO SEQUENCE®, focus on taking care of the testing procedure itself. If you are after a high speed, safety, and reliable least-fuss testing instrument, look no further. |
|
Hipot test to 6kVDC 10mA
Hipot test to 5kVAC 40mA
Ground Bond test to 42 Amps RMS
Insulation Resistance 50 to 1000V
Automated Remote Interface
|
|
Featuring
RS232, PCL & GPIB Control
AC Hipot to 5KV
DC hipot to 6KV
Insulation Resistance to 10GW
ARC Detection
Ground Continuity to .001W
|
|
Universal mobile
The test system is equipped with a universal tester. With this new developed unit you can also carry out high- voltage tests with AC or DC.
Furthermore you can also realize an insulation- and PE- resistance test. Moreover the test system can be expanded with a leakage current tester for the latest norms. The components are connected with a matrix and they are controlled with a special software package.
The slots are placed in a 19” / 12HE Rack. The whole test system is placed in a mobile. To adapt the test probes serves a connection box. With this box you can contact all kind of test probes.
At the back of the tester are high- voltage sockets. So you can realize a manual high- voltage test.
As an option the mobile is equipped with a PC. |
|
| SIRIUS 87 is a model to performing all safety tests according to VDE 0413 on electrical installations. Inside model are integrated new fundamental features: the possibility to perform Loop Impedance (P-P, P-N, P-PE) at high resolution (0.1mOhms) with use of IMP57 optional accessory. Thanks to its PC interface and powerful software you will create accurate documents qualifying your profession more and more. |
|
| SIRIUS89N is a complete model to perform all safety tests in compliance to VDE 0413, measure of values of environmental parameters (temperature/humidity, illuminance, sound level with optional probes), leakage current with optional clamp and to perform a network power quality of single phase in compliance to EN50160 guideline.RCDs which suddenly trip out, transformers which overheat, motors which burn out, voltage sags and surges which create problems, all these problems could be easily solved with SIRIUS89N. The meter permits to perform a Loop impedance measurement (P-P, P-N, P-PE) also with high resolution (0.1mOhms) with the use of IMP57 optional accessory and five predefined recording settings are integrated in order to to help the user on the most common situation which are present on the network quality (EN50160, Voltage Anomalies, Harmonics, Start-Up and Power & Energy). SIRIUS89N can perform current measurements up to 3000A AC also by using a flexible clamp type in order to perform measurements on big cables or bars also. Thanks to the PC interface and the powerful software you will create accurate documents qualifying your professionalism more and more. |
|
Small and practical radiation monitors worn directly on the body are used for personal safety in strong electromagnetic fields. Visual and acoustic warning signals alert the user when threshold values are exceeded, for example during service work on transmitting equipment for radio relay, satellite and broadcast communications as well as radar and telecommunication facilities.
RadMan has been designed for daily use, not just as a warning and monitoring device, but also for taking quick measurements of EMF levels present in the immediate environment and detecting leaks in antenna cables.
The sensors are integrated in an orthogonal pattern, which allows them to measure electrical fields (up to 40 GHz) and magnetic fields (up to 1GHz) separately and independently of direction. This makes it simple and quick to test the EMF situation in the workplace at any time. RadMan is also an excellent tool for finding leaks in cables and power supplies for antenna connections.
Monitors in the RadMan range are also available as an "XT" version with a long-term data memory for monitoring and recording the minimum, maximum and average radiation levels. With the help of analysis software it is also possible to evaluate the results as easy-to-read graphics or tables. |
|
| ... products without technical information |
| |
| Corrugated Mesh and Steel Mesh are particularly suitable for guards, enclosures and partitioning in conjunction with Clamp Profiles. |
|
| mageba earthquake bearings RESTON®POT Type HDPB (High Damping Pot Bearing) combine the advantage of a pot bearing with the shock absorbing qualities of hydraulic buffers. The design of the maintenance free hydraulic buffers corresponds to the most advanced specifications regarding anti-seismic behaviour of bridges. Under normal conditions, the bearing acts as normal pot bearing. |
|
In industry, it is advisable to make safe production zones described as dangerous.
AE&T provides the protection of safety zones using robust latticed panels standard and adjusted then with the good dimension, by panels to measure.
Doors sliding hinges or protected by locking mechanisms or n-key rollovers associated with relays with safety supplement the unit.
AE&T offers a wide range of components of safety for these latticed guards:
- switches of safety to pins, levers or magnetic for the machines without inertia
- n-key rollovers with key or by electromagnet for the machines with inertia
- relay of safety category 2,3 or 4 for the monitoring of the emergency stops, the n-key rollover and locking mechanisms.
Latticed guards AE&T, equipped with components of safety are very easy to install and allow to delimit all types of danger zones in periphery of the machines presenting a body risk for the workers: cells of robotization, palletizers, machines of cutting or folding, conveyers... |
|
A complete system of welded mesh for sites where requirements on security and design is decisive.
Gunnebo's welded mesh system is called Secure. Secure is a complete system of welded mesh for sites where requirements on security and design is decisive. The system consists of welded mesh partitions in different dimensions.
Nätsektionerna är svetsade i varje punkt, vilket tillsammans med den grova tråddimensionen ger ett starkt och säkert stängsel med mycket god stabilitet och snygg design.
Application areas: Industries, military sites, embassies etc |
|
| ... products without technical information |
| |
|
|
see the results for the following category
