|
|
EMC Partner offer a range of test equipment to cover the indirect lightning effect tests as defined in documents; RTCA/DO160 and EUROCAE/ED14.
The MIG0600SS, MIG0600MS, MIG0618SS and MIG-OS-MB generators are designed to carry out Pin injection(PIN), Single Stroke(SS), Multiple Stroke(MS) and Multiple Burst(MB) with five different waveforms;
6,4/70 µs (WF1), 0,1/6,4 µs (WF2), 1MHz & 10MHz damped sine (WF3), 6,4/70 µs (WF4), 40/120 µs (WF5A) and 50/500 µs (WF5B).
Multiple Stroke patterns are available with fixed or randon spacing to meet all current requirements including Airbus ABD0100-1-2, Boeing D6-16050-5C and many more.
Voltage spike testers are available to meet Airbus AMD-24C standards for the A400M and A350XWB, DO160 sections 17 and 19 and the EFA4 pulses for the Eurofighter typhoon II.
All systems are complete and include couplers for PIN injection, Cable induction and Ground injection.
Additional waveforms such as 6H or customer specific waveforms can also be included.
|
|
Electric power lines and telecommunication lines often occupy parallel routes as a result of the utilisation of joint facilities or sharing a common right-of-way. Direct contact with electrical mains power can occur through networks line cable faults. The contact may not cause opening of a power system circuit breaker. A.C. current resulting from direct contact may make effective protection difficult. EMC Partner have a range of products designed to meet the ITU-T K44, ITU-T K20 and ITU-T K21 requirements for both power CONTACT and power INDUCTION testing.
MIG-ITU-K44 is a stand alone system that delivers up to 1,600V for enhanced level testing. NW-K44PC can provide up to 600V to meet basic levels.
Additional accessories enable power contact testing at 230V up to 20A per line.
|
|
SPECIFICATION
Earth Continuity
Test Current >200mA
Display Range 0.00ohms - 200ohms
Resolution 0.01ohms maximum
Test Lead Compensation Null lead resistance 0.00ohms - 10.00ohms
Live Circuit Detection Test inhibit if >30V detected
Insulation Resistance
Test Voltage 100V, 250V, 500V, 1000V
Display Range 0.00Mohms - 200Mohms
Resolution 0.01Mohms maximum
Live Circuit Detection Test inhibit if >30V detected
|
|
|
Top of its class, the Primetest 100 is a functional, diverse and highly useful tool. Featuring three operational modes, it is an ideal choice for those looking for an easy to use, comprehensive unit. Simply pushing a button will give you the option of PAT Test mode, Class I and II, IEC Lead test mode or Power Socket mode. To further add to its easy operation, a bright display shows the test results values as well as a PASS or FAIL indication. And like the Primetest 100’s family members, it is battery powered to help users be quicker and more efficient in their work. Thanks to our PATGuard Workabout software, asset information can be recorded on-site for storage in a PAT test record database. This is a great choice for those looking for a versatile tester.
|
|
MIG2000-6 is a versatile generator capable of delivering impulses to meet MIL-STD-461F including the CS115 impulse excitation, CS116 damped sinusoidal transients and CS106 power lead transient requirements. Further modules are available which extend the system to include MIL-STD-1275B for military vehicles. This module includes an integrated impulse geenrator and coupling network for 28Vdc.
MIG1212EMP delivers fast risetime impulses to three phase power lines for testing of civil defense and military installations against NEMP events.
MIG-OS-OM-EXT complies with the IEC61000-4-18 requirement for HEMP testing of elctrical and electronic equipment within buildings. Frequencies up to 30MHz have been selected as representative of a ringing effect caused by field coupling into short cable lengths.
All systems are complete and include necessary couplers to perform testing on cable bundles.
A reliable and flexible test system, MIG2000-6 is in use at many facilities worldwide.
|
|
With the Motor Performance Monitor, Baker Instrument Company continues to pioneer new breakthroughs that demonstrate an ongoing commitment to quality, reliability, and competitive advantage. This on-line motor analyzer takes the next step in providing complete P/PM programs. It provides root-cause analysis through the separation of mechanical and electrical issues.
The Explorer Series II was superiorly designed to pinpoint challenges (voltage source, VFD, motor, load) your rotating machinery face. This self-contained portable instrument is computer driven with proven engineering, allowing all testing to be accomplished directly from the MCC or from Baker EP connection.
|
|
Our electrical testing instruments cover the widest range of electrical tests required by international safety standards.
Depending on the specificities of your test and your test bench, ATEQ engineers determine which of our wide range of electrical testers best suits your application.
|
|
Electric Safety Tester PE, ISO, HV
Whether as a stand alone system, or part of a fully automated test system – the Elabo Combitester sets itself apart with its wide range of applications and versatility. All test systems come ready and equipped to handle most jobs, though they can be adjusted with the appropriate plug-ins to meet further requirements. In addition to automated use, which is controlled only through an interface, there are also models with integrated touch screens available. PC-Software packages are available to assist in the assembly of complex systems, which cover all the requirements of a modern testing facility (Test Plan Creation, Visualization, Documentation, Statistics, etc.).
|
|
|
|
|
|
The TOS9200 Series has been developed to meet a wide diversity of customer needs. Including the refinement and enforcement of Kikusui%'s former Series, its specifications reflect the results of detailed study of our large database of user%u2019s requirements including special orders and modifying specifications.
The TOS9200 Series consists of four products the testers TOS9200 and TOS9201, and the high-voltage scanners TOS9221 and TOS9220.
The TOS9200 is equipped with AC withstanding voltage and insulation resistance testing functions, while the TOS9201 has a DC withstanding voltage testing function in addition to these two functions. The power block, a core component, employs a high-efficiency switching power supply and a switching amplifier based on PWM systems. These features realize high power and enhanced stability, as well as reducing the size and weight of the unit. When combined with the earth continuity tester TOS6200, the TOS9200 Series integrates three or four types of tests in a single process. Furthermore, when used together with the high-voltage scanner TOS9220/9221 (equipped with a contact check function), the tester is capable of automatically checking test points for up to 16 channels, thereby facilitating a safe, reliable automatic testing system.
|
|
The fast and easy solution to voltage, continuity and resistance measurements
Ideal for site conditions, the 3 models of the T100 Series 2-pole testers have a rugged construction and ergonomically formed housing for perfect handling. All models offer a patented three-phase rotation detection system providing quick phase rotation indication. Moreover they have a special electrical torch function for working in low light level environments and have an ingress protection rating of IP65. The T100 Series are compliant with EN 61010-1 and EN61243-3 requirements.
|
|
Standard Features
Accurate Earth Bond and Leakage Measurements even when multiple Earth Paths exist.
Seaward Super System (SSS) for speed
Has up to 5000 Memory Locations
Dual voltage test capability
Modem Capability
Summary Format
Polarity Lead Test capability
Tests IT equipment
Real time clock and non-volatile memory
Capable of printing barcode labels in conjunction with thermal printer
Connects to PC, barcode reader, Brain Cells Scanner and printer
Supplied with luxury Carry Case
Optional Rubber Holster
|
|
Any appliance, any test
A full and comprehensive set of tests, together with full dual voltage and flash test capacity, means you can do any test there and then.
Walk through instructions
Good news. You don’t have to be a brain surgeon to operate it. The large, easy to read display will walk you through any test procedure with ease.
|
|
|
|
|
|
Fluke1650b electrical Installation tester series
Extra functionality, faster testing and as rugged as ever
The 1650B Series builds on the rugged performance of the earlier 1650 Series, but it has been redesigned to make testing even more productive. The Fluke 1650B units verify domestic, commercial and industrial electrical installations. They ensure that fixed wiring is safe and correctly installed to meet international standards IEC 60364, HD 384 and UK requirement BS7671, IEE 17th Edition wiring regulations.
The 1650B shows two measurements at once on a dual display. For example this can show PEFC/PSC and loop impedance results in parallel negating the requirement to run the tests separately, more than halving the test time of other loop testers.
The 1650B series features an additional new high-current loop test which gives extremely fast measurements when testing in circuits where no RCD's are being used. All the 1650B series offer both non trip and this new high current tests so the user can select depending on the application.
In addition there is fast voltage measurement between L-N, L-PE and N-PE using the mains cord, with no need to change measurement connections.
|
|
The PAT500H is a simple to use handheld Portable Appliance Tester designed to test the electrical safety of Class I and Class II 240V electrical appliances with current safety legislation.
The PAT500H minimises the risk of damage to sensitive electronic equipment, making the unit suitable for testing in the office and Information Technology environments
|
|
|
SIRIUS 87 is a model to performing all safety tests according to VDE 0413 on electrical installations. Inside model are integrated new fundamental features: the possibility to perform Loop Impedance (P-P, P-N, P-PE) at high resolution (0.1mOhms) with use of IMP57 optional accessory. Thanks to its PC interface and powerful software you will create accurate documents qualifying your profession more and more.
|
|
|
Turn-key solution performs indirect lightning effects test requirements of all leading aircraft test standards including; DO 160 E/F Sect. 22, EUROCAE/ED14, ISO-7137, SAE ARP5412, Boeing D6-16050-4, Airbus ABD100, and more. Large client base worldwide, field-proven, robust, reliable, and repeatable. Training and technical support included. Solutions to CS 106, 115, 116 and RS 105 also available.
|
|
Full Compliance CE Mark test equipment and ANSI transient test solutions. Choice of 4kV or 6kV SURGE generators with Combination, 100 kHz Ring, and 10/700 waves plus your choice of ESD, EFT, and voltage DIPS and Interrupts as needed. Integrated, automated, single phase CDN.
|
|
Hipot test to 6kVDC 10mA
Hipot test to 5kVAC 40mA
Ground Bond test to 42 Amps RMS
Insulation Resistance 50 to 1000V
Automated Remote Interface
|
|
Perform insulation resistance and withstand voltage testing in a single series
This electrical safety test instrument series is designed for insulation resistance and voltage withstand testing of electrical devices and components according to various safety standards. A multitude of automation and labor-saving features are provided to ensure effective testing for a wide variety of requirements and test conditions. Select the most appropriate model for your applications.
Insulation and voltage withstand testing
Safety standards compliance testing
Stores up to 10 sets of test conditions (10 each for insulation and voltage withstand)
Voltage comparator functions (voltage withstand testing)
Zero-V Switching (voltage withstand testing)
Electrical Discharge function (insulation testing)
Automated testing support
Interlock Protect function
Remote controllable
|
|
|
|
|
|
Everything you need for standard testing
Simple, safe and high-performance, the C.A 6114 has quickly proved an essential tool for all the tests required by the NF C 15-100, VDE 0100, NIN/NIV, IEE 16th and ÖVE EN-1 standards, which call for a series of tests on all LV installations at delivery and then periodically thereafter.
· automatic installation status test immediately after connection
· measurement of voltage (10 to 440V AC/DC) and frequency (15.3 to 450Hz)
· installation insulation measurement at 500V
· standard earth connection resistance measurement (1 stake + loop method)
· PE conductor continuity test
· measurement of internal loops (verification of capabilities of protective devices already in place)
· testing of RCDs up to 500mA (exact tripping time and current)
· phase rotation testing
· alarms on all functions
· 800-measurement memory and RS 232 interface
· excellent ergonomics: site-proof casing with neck strap, large backlit display
· limited number of keys to avoid mistakes
· marked connections and cleverly-designed measurement cables
· NiMH rechargeable batteries + built-in charger for quick recharge
· complies with IEC 1010-1 Cat.III 300V
· dimensions: 295 x 230 x 108mm; weight: 2.1kg
|
|
We offer the world’s largest range of EMC Transient & Impulse test solutions for compliance or 1st article testing. Innovative transient/impulse test systems from a few 100 volts to over 100 kV, tailored specifically for your industry. Specialists in avionic, CE immunity, telecommunication, and component test equipment.
Test equipment for:
Electrostatic Discharge (ESD) and Surge Testers
Transient Immunity Testers
Harmonics Testers
Oscillatory Wave Testers
Modular Impulse Generators (MIG)
Harmonics Measurements
Flicker Measurements
NEMP (Nuclear Electromagnetic Pulse) Generators
|
|
Testers for lightning tests on telecommunication equipment based on the following standards or recommendations: ITU-T, IEC, Bellcore and FCC.
|
|
|
|
|
|
|
The LINECHEK® Model 620L is a fully automated Line Leakage tester that can be configured to perform 8 of the most commonly required Line Leakage tests. The 620L has the most common measuring devices (MD's) already incorporated into the instrument and can perform patient lead tests with an optional scanning matrix. The 620L also features a continuous run capability which allows the DUT to be run without shutting down between line leakage tests. This remains true even in reverse polarity conditions. When configured with an optional Run test feature, the 620L can also monitor minimum and maximum readings for Voltage, Current, Watts, Power Factor, and Leakage Current. It can be configured for use in stand alone applications or as part of a test system when interconnected to any Associated Research Hipot or Ground Bond tester. The 620L may also be interconnected with the AC1000 Power source to provide clean power to the DUT and allow for full adjustment of DUT input voltage. For automated control of applied part test points, the 620L may be combined with the SC6540 modular scanning matrix. Lastly, Ethernet, RS-232 or GPIB communication interfaces allow for the automated control of the instrument.
|
|
BT 200 Bus Tester - Check the physical bus design of the PROFIBUS network at the end of the installation phase. Installation errors can be detected quickly and without any effort; no special knowledge of PROFIBUS is required. It is an invaluable assistance when installing distributed automation solutions with PROFIBUS.
BT 200:
Check electrical PROFIBUS networks also without a connected master
Minimizing errors during installation and commissioning
Easy to operate even without special PROFIBUS knowledge
Finds installation errors within seconds
Reduces commissioning and service times and increases plant availability
Optional logging kits available for compiling acceptance reports/documentation
Choice of 6 languages
For installers, start-up engineers and service personnel
|
|
Earth Leakage and its associated hazard can be prevented by residual current circuit breakers (RCCBs), also popularly known as Earth Leakage Circuit Breakers. RCCBs operate by comparing the current flowing into an appliance with the current flowing out. A discrepancy will cause the breaker to trip and disconnect the apliance from the main supply. They are used in both single phase and three phase applications.
The MIG0603CB is a specially designed generator for impulse test on circuit breakers. The following waveshapes can be generated:
8/20ìs up to 3000 A
0.5ìs 100 kHz up to 250 A
1.2/50ìs 500 Ohm up to 12 kV
The peak output voltage and current of the MIG0603CB are indicated on the front display. The two BNC monitor outputs (v,i) allow monitoring the voltage and current wave shapes on an oscilloscope.
A coupling and de-coupling network is included to superimpose the SURGE on a two wire power supply.
|
|
Featuring
RS232, PCL & GPIB Control
AC Hipot to 5KV
DC hipot to 6KV
Insulation Resistance to 10GW
ARC Detection
Ground Continuity to .001W
|
|
|
The OMNIA 8100 series is a family of multi-function electrical safety compliance analyzers that consist of three models. OMNIA 4, model 8104, is a 4-in-1 instrument that provides AC/DC Hipot, Insulation Resistance and 40 Amp Ground Bond/Continuity tests. OMNIA 5, model 8105, is a 5-in-1 instrument that provides AC/DC Hipot, Insulation Resistance, 40 Amp Ground Bond/Continuity and Functional Run tests. OMNIA 6, model 8106, is a 6-in-1 instrument that provides AC/DC Hipot, Insulation Resistance, 40 Amp Ground Bond/Continuity, Functional Run and Line Leakage tests. All models feature an enhanced graphic LCD and simplified user-interface. OMNIA can be used as a bench top instrument or as a PC controlled system. It is best suited for applications that require multiple product safety tests with a single Device Under Test (DUT) connection. The ability to perform multiple electrical safety tests with a single connection will increase production and efficiency while saving time and money.
|
|
OMICRON's CT Analyzer is a unique lightweight electronic multifunctional instrument designed to meet the highest standards for performing excitation, ratio, polarity and winding resistance tests on current transformers (CTs) as well as burden-impedance measurement.
Applications
- Burden measurement
- CT Winding resistance measurement
- CT Excitation characteristic recording
- CT transient behavior measurement (IEC60044-6)
- CT ratio measurement with consideration of connected burden
- CT phase and polarity measurement
- Determination of accuracy limiting factor (ALF), instrument security factor (FS), secondary time constant (Ts), remanence factor (Kr), transient dimensioning factor (Ktd), knee point voltage/current, class, saturated and non saturated inductance
- Assessment according to defined standards: IEC60044-1, IEC60044-6, IEEE C57.13-1993
|
|
Damped oscillatory waves are phenomena associated with the opening and closing of High Voltage (HV) busbars in power transmission stations and High Altitude Electromagnetic Pulses (HEMP).
The IEC61000-4-18 standard extends to existing 100kHz and 1MHz frencies with additional fast damped oscillatory waves at frequencies of 3MHz, 10MHz and 30MHz.
EMC PARTNER designed the MIG-OS-OM-EXT to add fast oscillatory wave capability to existing EMC PARTNER generators.
MIG-OS-OS1 and MIG0603OSI generators deliver 100kHz and 1MHz slow damped oscillatory waves that were specified in the IEC61000-4-12 Ed1 standard.
For power applications, the equipment to be tested is generally connected to 3-Phase power lines. CDN3000A-06-25 enables coupling of both fast and slow oscillatory waves.
HEMP applications require capacitive coupling. CN-EFT1000 enables coupling into unshielded wires.
|
|
OMICRON's multifunctional primary test system CPC 100 and its accessories provide a wide area of applications for the user. The patented system allows for automated testing of power transformers, instrument transformers, resistance testing, and measurement of line and ground impedances. It's the perfect solution for various tasks in and around substations as well as in manufacturer environments.
Applications
- Current Transformer (CT) Testing
- Voltage Transformer (VT) Testing
- Power Transformer Testing
- Resistance
|
|
|
|
