|
|
Used as head pulley in belt conveyors for continuous automatic removal of ferrous from non-ferrous material. Eriez new axial-interpole circuit provides very high ferrous recovery.
Permanent Magnetic Pulleys
Often used to convert a belt conveyor into a powerful magnetic separator.
|
|
The Very Low Iron Metal Separator (R-INOX) has a drum of high remanence with highly powerful magnets that can separate iron metal from light iron metal (similar to stainless steel) and from the inert.
The Very Low Iron Metal Separator (R-INOX)is built with a hard metallic structure. It supports two drums and the belt conveyor, which passes over a stainless steel table to have a totally plane surface. This belt is always centered by an automatic centering system.
Outgoing drum is a magnetic drum. This drum is made of Neodimium's high powerfull magnets, assembled into studied configuration, giving a very strong magnetic field. This allows to separate very low iron material from others. It also will separate small iron metals that they were not able to be separated by other equipments.
|
|
Magnetic Pulleys
Application: Automatic extraction of tramp iron from various products (ore, coal, waste, cullet, etc.), protection of processing machinery.
Main features:
- Custom-manufactured models - wide range of drum diameters, lengths, magnetic field strengths available;
- Exact copies of existing pulleys can be manufactured for easy replacement;
- Reliable and suitable for heavy duty applications;
- Powerful Nd-Fe-B magnets used;
- No electric power required for magnetic field generation;
- Equipment can be linked to existing control systems;
(!) For conducting laboratory tests with your material please contact our sales department.
(!) All magnetic pulleys are custom-manufactured, please attach a completed questionnaire to quotation requests.
|
|
|
|
|
|
The Permanent Magnetic Roller (R-RM) has a cylindrical body containing powerful magnets, ferrit or rare hearth (Ne-Fe-B), making it a high intensity magnetic separator. There is no energetic cost.
Magnetic Roller (R-RM) are used installed instead of conveyor head Roller or after a vibrating feeder. It is able to carry the conveyor on. REGULATOR – CETRISA is able to manufacture any Roller in order to replace the existing Roller, so customer has no any dimensional change.
Sometimes, when a very high power or very big diameter is needed, REGULATOR – CETRISA is able to make and supply an Electromagnetic Roller (R-RME). It needs an electrical power supply for generate the magnetic field.
The magnetic separator operates with the material being fed onto a conveyor or directly through a vibrating feeder. Non-magnetic material is discharged forward of the Roller in the normal trajectory, but the magnetic elements are held to the belt and are discharged down the bottom side of the conveyor, outside of the magnetic Roller influence.
|
|
Overband Magnetic Separator could be electromagnetic or permanent magnet made of.
Electromagnetic Overband Separator (R-SKM)
A coil rolled over a magnetic pole, with a passing electric current, provokes a magnetic field. An iron material that crosses this magnetic field will be attracted to the coil and automatically separated from the rest of the materials, driven by the pulling band.
Permanent Magnetic Overband Separator (R-OMP)
The magnetic field is produced by the joining of highly powerful magnets. An iron material that crosses this magnetic field will be attracted to the magnets and separated from the rest of the materials, driven by the pulling band.
Overband Magnetic Separator can be installed either transversally or longitudinally.
|
|
Magnetic drum TM model.
The magnetic drum TM substitutes the drive drum of the conveyor belt, separating ferric metals from any other inert , loose product. When it reaches the end of the belt, the material conveyed falls but the ferric metals are retainded by the drum, falling in a different direction to the purified material.
|
|
|
When material passes over the pulley, ferrous metal objects are attracted by the magnetic field and held tightly as the belt travels around the pulley are not released until they leave the influence of the magnet. Non-magnetic materials follow a normal trajectory. A divider plate can be installed to ensure that no remixing occurs. Standard diameters range from 6" to 36," and standard widths range from 10" to 62." Shaft size depends on length and weight
|
|
Slag, minerals, wood chips, glass, Sand, WEEE, Shredder Residues, Municipal Waste
STEINERT Magnetic Head Pulleys attract tramp iron from these bulk materials in the same space as the normal conveyor belt head pulley. This avoids extensive reconstruction of your plant. Magnetic Head Pulleys protect your valuable processing equipment from damage by tramp iron that drum or suspension magnets miss buried in the burden.
STEINERT Magnetic pulleys are usually operated after the extraction of larger iron parts by other magnetic separators. Magnetic pulleys with strong neodymium type magnets can reclaim small, low magnetic particles - partially stainless - from the bulk materials.
|
|
MAGNETIC SELF-UNLOADING SEPARATORS
They are intended to extract and to remove automatically ferromagnetic impurities and things from free-flowing bulk materials that carried by a conveyer belt from 650 to 2000 mm wide.
Extracted ferromagnetic things are disposed by conveyer belt into a storage.
|
|
|
|
|
|
|
Cascade magnet systems are used in situations where ferrous particles have to be removed thoroughly from large quantities of raw materials. Cascade systems are available in manual and automatic models and are strongly built with a 4 mm thick stainless steel or steel housing. Bakker Magnetics cascade systems have a wide range of uses and are easy to incorporate in existing systems. A valve box is built in to the cascade systems to remove the ferrous particles that have been collected. Once the valve box has been opened, the magnets can be turned away and the ferrous particles will then drop out of the system via the side exit. Both manual and pneumatic versions are available in all models. With the pneumatic versions, a push of a button is sufficient to remove all the ferrous particles collected in the valve box chamber. Optionally, this type can be supplied with an electrically operated valve. All the components of the pneumatic system conform to the ISO and CETOP standards. As an option, the automatic versions can be fitted with a pressure tank which enables the system to stay in service when the supply of air pressure is lost. If required, all models can be fitted with inspection windows and/or manganese steel wear plates.
|
|
|
|
|
|
One main application for the High Gradient Magnetic Separator HGS is the processing of minerals such as heavy mineral sands, glass sand, ceramic raw materials, salt, slag, fine coal and other fine ores that contain feebly or paramagnetic particles that need to be separated. Leading edge technology is required to meet these duties of separation for either the removal of impurities or the recovery of valuable minerals. The Steinert HGS provides the performance for these critical separation applications, the high magnetic field gradient and the reliable design. The HGS is a high intensity magnetic separator with a modular design consisting of either single or multiple stages to suit the separation of the material.
Each stage or module consists of a short belt conveyor to transport the material continuously to the magnetic pulley of the HGS which generates a high magnetic field gradient and a magnetic field strengths of up to 20,000 Gauss. The open design of the Steinert HGS allows the processing of particles from 10 mm to less than 1 mm in size.
|
|
Overband with electromagnet ODEP model.
These units consist of either a permanent magnet PL or an electrical magnet DEP, depending on the required output, located above a conveyor belt. Any pieces of iron, or other magnetic metals, that pass under the magnet, mixed with the material being conveyed, will be attracted and retained by the magnet, thus separating them from the material they were mixed with, given that the separator is surrounded by a conveyor belt, with dismensions that are suitable for the separator unit, the purpose of which is to remove all of the pieces of iron that have been captured, letting them fall at a determined point.
|
|
Overband with permanent magnet OPL model.
These unit consist of either a permanent magnet PL or an electrical magnet DEP, depending on the required output, located above a conveyor belt. Any pieces of iron, or other magnetic metals, that pass under the magnet, mixed with the material being conveyed, will be attracted and retained by the magnet, thus separating them from the material they were mixed with, given that the separator is surrounded by a conveyor belt, with dimensions that are suitable for the separator unit, the purpose of which is to remove all of the pieces of iron that have been captured, letting them fall at a determined point.
|
|
Municipal waste, coal , ores, demolition scrap shredder material, scrap wood, glass, foundry sand
Suspension magnet separators from STEINERT have been extracting iron and iron-bearing components from these and other bulk materials for many decades. On the one hand, they extract clean iron scrap and on the other, they protect grinders,mills and other processing equipment against wear and tear.
What’s more, they also produce iron-free raw materials for further processing. STEINERT’s suspension magnets are characterized by extremely powerful and long-reaching magnetic fields. Regular product improvements ensure recognizably efficient construction and operation as well as low maintenance design.
|
|
Bunting Magnetic Separation Pulleys are engineered for easy installation in belt conveyors. They feature a radial magnetic field that gives complete magnetic protection over the entire face of the pulley for superior removal of ferrous contaminants.
Separation Pulleys can replace existing pulleys at the discharge end of a conveyor line and be used alone or in combination with other Bunting Separators designed for conveyor applications like our Suspended Plate Magnets and Cross-Belt Separators.
o Continuously remove and discharge tramp metal from material flow.
o Radial magnetic design eliminates dead spots.
o Order standard high-density Ceramic or optional Rare Earth magnets.
o Sizes to fit your conveyor with removable or fixed shafts.
o Select 6", 8", 10", 12", 18",or 24" diameters.
o Specify widths in 2" increments.
o Enjoy maintenance-free operation.
|
|
General description
Coolant, containing ferritic perticles, is pumped into the magnetic separator where the coolant is then passed over rotating magnetic rollers. The ferritic particles then attach themselves to the rollers. As they accumulate the particles are eventually srapped off rollers and residuals coolant is allowed to drain back into the filter system. Drained particles are deposited into an optional sludge container.
|
|
Combined magnetic separation solutions
Application: automatic separation/recovery of ferrous and non-ferrous materials.
Main features:
- Custom-designed and manufactured separation solutions for specific applications, combining conveying, vibratory, screening, magnetic separation and metal detection equipment;
- Single operating console for complete control over the whole system;
(!) For conducting laboratory tests with your material please contact our sales department.
(!) Please attach a completed questionnaire to quotation requests.
|
|
NON-FERROUS SEPARATORS (EDDY CURRENT PRINCIPLE)
Removing non-magnetic metals, such as Aluminium, Copper, Brass) from 4 mm
Specific application: recycling, such as: incineration waste, glass, wood, household waste, rubble, plastic, WEEE scrap, refrigerators, shredder residue etc.
Cleaning: automatic, continuous
Suitable for belt widths up to 2000 mm
Electrical current required
|
|
| ... products without technical information |
| |
Magnetic separator for conveying lines.
The PneuMag is a high intensity magnetic separator designed to remove ferrous and stainless steel scrapings from pneumatic conveying lines operating at up to 25m/s.
It features a centrally positioned high intensity magnetic grid with quick release toggle clamps, tamper proof cover plate and totally stainless steel construction.
The PneuMag is particularly suited to flour, sugar and other powder and granulate processing.
High magnetic performance - 9000 Gauss
Reduces 'spark' risk
316 grade stainless steel construction
Cleaned in under 30 seconds
Tamper proof guard
Silicon rubber, metal detectable seal
|
|
Magnetically coupled centrifugal pumps of building group 2 are non-self-priming centrifugal pumps with volute casing. They operate in horizontal position and are built in monobloc design. A magnetic coupling connects the pump to the electromotor and transmits the power of the motor to the impeller.
Housing, impeller, impeller magnet coating and rear casing can be made of either glass-fibre reinforced PP plastic or PVDF. Sleeve bearings, starting ring and centering shaft are made of 99.7% pure oxide ceramic. O-ring sealing of the housing is made of FPM or EPDM or FEP (optionally available).
- For aggressive and neutral liquids
- For short-term and continuous operation
- With non-ventilated motor so that it is insensitive to vapour.
|
|
Magnetically coupled centrifugal pumps of building group 4.5 are non-self-priming centrifugal pumps with volute casing. They operate in horizontal position and are built in monobloc design. A magnetic coupling connects the pump to the electromotor and transmits the power of the motor to the impeller.
Housing, impeller, impeller magnet coating and rear casing can be made of either glass-fibre reinforced PP plastic or PVDF. Sleeve bearings, starting rings and centering shaft are made of 99.7% pure oxide ceramic. The impeller starting ring is made of PTFE graphite. O-ring sealing of the housing is made of FPM or EPDM or FEP (optionally available).
- For aggressive and neutral liquids
- For short-term and continuous operation
|
|
Magnetically coupled centrifugal pumps of building group 1 are non-self-priming centrifugal pumps with volute casing. They operate in horizontal position and are built in monobloc design. A magnetic coupling connects the pump to the electromotor and transmits the power of the motor to the impeller.
Constructional design
Housing, impeller, impeller magnet coating and rear casing are made of either glass-fibre reinforced PP plastic or PVDF or stainless steel. Sleeve bearings, starting ring and centering shaft are made of 99.7% pure oxide ceramic. O-ring sealing of the housing is made of FPM or EPDM or FEP (optionally available).
- For aggressive and neutral liquids
- For short-term and continuous operation
|
|
|
|
see the results for the following category : 
