|
|
|
|
|
|
VARISORT CME-P - Combined colour and metal separation system for plastics recycling applications (material fed by conveyor)
The VARISORT CME-P combined colour and metal separator is designed for use in the plastics recycling industry to remove metal (cans, foil-lined Tetrapaks etc) and off-colour contaminants (bottles, cups etc) from plastic bulk materials. The material to be inspected is spread out on a fast-moving conveyor so that the pieces are optimally individualised before they reach the inspection area of the multi-channel metal detector. If a contaminant is detected its exact location is determined. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the metal and off-colour contaminants are removed with very little loss of good material and without any interruption to the material flow.
Advantages:
• removes metal, metal composites and inclusions
• removes contaminants with pinpoint accuracy
• modular design
• evaluation of the entire visible light spectrum
• self-teaching evaluation electronics
Typical applications:
• removes cans from lightweight packaging
• removes off-colour plastic bottles
• removes metals/off-colours from specialized plastics
|
|
|
|
|
|
MAG 4300 ME-P - Metal separation system for plastics recycling applications
The MAG 4300 series of metal separators, used in the plastics industry, removes metal contaminants eg aluminium, steel or stainless steel from regranulate. The flow of regranulate is widened on an external feeder and reaches the glass slide where the pieces are further individualised before continuing into the inspection area of the multi-channel metal detector. If a metal contaminant is detected microprocessors determine its exact location. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the metal contaminants are removed with very little loss of good material. The rest of the material, free of metal contaminants, then continues along the conveyor.
Advantages:
• removes all types of metal, including stainless steel
• removes metal, metal composites and inclusions
• removes contaminants with pinpoint accuracy
• modular design
Typical applications:
• removes pump dispenser springs and balls from PET flakes
• removes aluminium from HD-PE flakes
• removes stainless steel from PVC window regranulate
|
|
SPEKTRUM CE-P
Off-colour separation system for plastics recycling applications
Spektrum colour separation systems remove off-colours from a flow of plastic bulk materials. The material to be inspected is spread out on a conveyor and reaches the glass slide where the pieces are further individualised before continuing into the inspection area of the CCD linear camera. If an off-colour contaminant is detected its exact location is determined. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the metal particles are removed with very little loss of good material and without any interruption to the material flow.
|
|
|
The Marathon Pelletizer give exceptionally long production runs without maintenance shutdowns. It produces the high quality pellets required for today's advanced/engineering materials applications. The easy access features allow maintenance to be done quickly, on line, for increased productivity.
|
|
Blades Granulators for granulation and recycling of various objects of large sizes such as: Pallets, Drums, Vases, Films, Crates, Rolls, Vulcanised Rubber etc...
MAIN FEATURES : robust, high capacity, easy to clean and for maintenance, sieve changing by pneumatic piston, open and closing hopper by hydraulic system powered by motor.
|
|
The plastic Pulverizer on the market can be broadly into the following categories:
(A) hard plastic pulverizer, the pulverizing machine suitable for all types of small and medium-sized plastics plate.
(B) strong plastic pulverizer.
(C) the plastic pipe pulverizer.
|
|
Recycling lines
The CR recycling machines built by Carnevalli were designed to process flexible plastic materials , aiming the best cost-benefit ratio, such as : HDPE,LDPE,LLDPE< PP, and many other.
The main goal of these machines is to meet the need of flexible packaging manufacturers to process and recycle their own waste or scrap originated by their converting processes and also to those companies dedicated to the sole purpose of re-granulating these wastes to sub supply plastic processing companies.
All sizes of CR machines are fitted with degassing systems to allow recycling of printed materials.
|
|
Recycling Lines:
Recycling lines to reclaim plastic out of waste like oriented HDPE/PP Tapes, cuttings of woven fabric, industrial plastic wastes and general purpose wastes like LDPE/LLDPE/ HIPS/PP/HDPE/Polyester etc.
|
|
| ... products without technical information |
| |
|
The Tappex Trisert range of brass self-tapping inserts includes three primary designs: Double Ended, Reduced Headed, and Regular Headed variants, to solve most application problems in thermoset and thermoplastic grades including the latest engineering plastic alloys. The concept of the design is to provide a reliable and efficient post-mould production process, where the installation torque can be controlled and monitored for increased reliability.
|
|
|
SOFTERFIX™ inserts for overmoulding or insertion are the solution to obtaining a re-usable tapping or threading function in soft materials (thermoplastic, thermosetting materials, wood…)
|
|
Description:
JSTKB-M5-18
MATERIAL BRASS
THREAD SIZE M5*0.8
THREAD CODE M5
LENGTH CODE 18
(LENGTH "L" .013)
E NOM. 7.13
MINOR DIA.MIN./MAX. 4.15/4.34
other models are fully available:
JSTKC, JIUB, JIUC, JIBB, JIBC, JIBLC, JITB, JITC.
Features:
1. Inserted into non-metal material to provide firm thread.
2. Brass and stainless steel material are available.
|
|
The Tappex Multisert range of brass inserts for plastics has been developed to provide a multi-purpose insert for various environments and application criteria. It includes four primary designs: Unheaded, Single Thickness Head (single thickness head at standard and reduced diameters), Double Thickness Head (double thickness head at standard and reduced diameters) and Microbarb.
The Microbarb incorporates all the standard features of the Multisert range but provides the designer and production engineer with an insert suitable for pull through applications in thin section materials.
|
|
Thread Inserts for Plastics - AMTEC® and AMTEC® K' in K' (plastic in plastic)
Threaded inserts and the related assembly systems for after-moulding technology are supplied under the name AMTEC®.
These threaded inserts are designed specifically for insertion after removal of components from the mould.
The result provides strong, wear-free, durable threads in high quality plastic components.
The following methods are available for insertion: hot embedding, ultrasonic heat insertion, expansion anchoring or self-tapping.
|
|
Threaded inserts and standard threaded studs for heat insertion, moulding or cold insertion, in all types of plastics.
Advantages : Offers a resistant tapped or threaded mounting, avoids stress in plastics, high resistance to tensile strength and tightening torque.
Material : brass
Dimensions : from M1.6 to M10 ex-stock, other dimensions under request.
|
|
Dodge® threaded inserts for plastics are brass screw machine products designed to provide strong metal threads in plastic components.
They are available with various knurl and undercut patterns to suit almost any threaded assembly application in plastic. Dodge® inserts can be installed in a variety of ways including ultrasonic welding, hot or cold press-in, mold-in and self threading.
Typical Applications would include Automotive Computers,Communication, Aerospace, Defense, Medical industries.
|
|
- Dimensions : M2 to M30
- Product features: Self-tapping with cutting slot
- Receiving hole : Moulded or drilled
- Pull-out strength : Very high
- Dimensions : M2,5 to M16
- Product features : Self-tapping or thread forming
- Receiving hole : Pre-formed or drilled
- Pull-out strength : Very high
|
|
|
|
|
|
Ultrasonic/Heat Staking Inserts
ISB, ISC
Symmetrical, thru-threaded inserts designed for use in straight or tapered holes. Symmetrical design eliminates the need for orientation. Thread sizes #2 to 1/4" and M3 to M6.
IUTB, IUTC
Straight wall, thru-threaded inserts designed for use in straight holes. Self-aligning lead-in provides for accurate alignment prior to installation. Thread sizes #2 to 3/8" and M2 to M6.
Molded-in Inserts
IBB, IBC
Blind threaded inserts. Blind-end protects the threads from plastic intrusion. Thread sizes #2 to 3/8" and M2.5 to M8.
IBLC
Self-locking blind threaded inserts. Deformed threads lock screw in place to resist vibration. Blind-end protects threads from plastic intrusion. Thread sizes #2 to 1/4" and M3 to M6.
Press-in Inserts
NFPA, NFPC
Hexagonal, press-fit insert provides strong, reusable threads. No heat or ultrasonics required. Hexagonal "barbed" configuration ensures high torque-out and pullout values. Thread sizes #2 to 5/16" and M3 to M8.
PKB
Straight knurl press-fit insert with strong, reusable threads. No heat or ultrasonics required. Straight knurling at the top end of the insert offers higher torsional resistance. Slotted insert compresses allowing easy access into the mounting hole. Thread sizes #2 to 1/4" and M3 to M6.
|
|
|
C inserts are recommended for thermoset or thermoplastic applications. Their geometric shape and sharp pointed barbs eliminate any danger of the moulded bosses splitting on installation or when tightening of the mating screw occurs. The wall thickness of bosses should generally be at least one half of the insert diameter. Different materials may require slight modifications to the hole dimensions stated above and it is essential that the hole depth is sufficient to allow the screw to pass completely through the insert to achieve optimum performance. The head provides the useful feature of eliminating jack-out loads when used with a mating part which has a larger hole than the standard insert diameter. It can also be used as a contact point for electrical terminations.
|
|
| ... products without technical information |
| |
... see all the products in the category
Inserts
|
|
|
see the results for the following category : 
