|
|
Flowview 100i
The solution for controlling of stock and consumption. Flexible programming of the Micro-PLC possible. All typical functions of a PLC available. Flexible programming of the visualization and information about connected devices is based on the IEC61131-3 conform programming software. Connecting of different MIB flowmeters via RS-485 interface or the I/Os.
It is also possible to connect foreign devices on the I/Os. Data transmission via Ethernet or GSM is available optionally. The Flowview 100i is a compact All-in-One controlsystem with integrated touchscreen, I/O-Module, networking option and MicroSD card slot.
Due to it´s specially designed high-resolution resistive touchscreen the Flowview is suitable for outdoor and indoor applications. (if mounted in a panel, protection class IP 67)
The Flowview is programmable by the programming software "Cscape". It is possible to control a range of different processes from small to large applications.
|
|
Featuring 5 digits of rate and 8 digits of total, the
HIT-2A is a DC, AC, loop or battery powered indicator
capable of accepting magnetic pickup, DC pulse or switch
closure inputs. The unit can be ordered with an optional
loop powered 4-20mA output. The HIT-2A uses the 4-
20mA loop to provide power when this output is used.
|
|
Flow Indicators are designed for continuous monitoring or intermittent use commissioning and servicing hydraulic systems up to 420 bar, 6000 psi.
The large clear 63mm (2 1/2") diameter dial ensures that quick checks can be made to determine pump performance and setting of flow control valves. They can be used on mobile and industrial hydraulic circuits. Also lubrication and coolant systems using oil.
These direct acting flow indicators can be installed in hazardous areas or on applications where no power is available. The flow indicator design ensures good reliability and minimises the effects of contamination.
|
|
TD 32500 – multi purpose and robust instrument
TD 32500 is a digital flow and volume measurement instrument, which is fitted directly to a SIKA flow sensor, making up a perfect team for any application. Various turbine and gear wheel sensors are available as flow sensors.
The programmable measuring instrument is used for displaying of flow or summing up of total volume. The display can optionally be equipped with an additional measuring input for the resistance thermometer Pt 100, two fast-switching alarm outputs, a frequency divider
output or an analogue output.
TD 32500 consists of a robust stainless steel casing, which can be turned by 180°, thus providing an optimum readability of the display.
The display can be switched between flow, total flow (resettable), fix-volume (non-resettable), and optionally temperature. In addition, a bargraph 0...100% can be displayed for flow, volume, and temperature.
|
|
|
The current family of Scanner EFM Flow Computers represents more than 70 years of measurement expertise culminating in the on-going development of electronic measurement technology. As stand alone units NUFLO flow computers and automation products can collect, display, process and store data for historical and real-time measurement and reporting. As part of an engineered automation system, customers can pick and choose from a variety of options to create solutions tailored to specific requirements. For this reason, NUFLO engineered systems are becoming a standard for major oil and gas production, transmission and distribution companies.
|
|
|
Blancett offers advanced microprocessor-based flow monitors in many mounting options. Units are battery-powered (one "D"-cell 1.5 VDC) or loop-poweed (10-30 VDC). Explosion-proof enclosure also available.
|
|
The contactless measurement and the lack of moving parts, allow a precise determination of the mass flow without any wear to the systems components. This outstanding advantage is applicable on various mechanical conveying systems like:
belt conveyors
screw conveyors
troughed chain conveyors
steel plate conveyors
bucket conveyors
free fall in chutes or pipes
This makes a radiometric bulk flow measuring system particularly interesting for various applications.
|
|
The C-LEVER® II by REMBE® sets the benchmarks in the field of industrial flow metering.
Its unique technique achieves an excellent accuracy of ± 0,25 % of the volumetric range for nearly all flowing bulk and solids.
The accuracy of the C-LEVER® II is almost independent from product, its density, form, friction and elasticity. Severe changes of flow and/or pulsations caused by rotary valves or screw feeders do not influence the accuracy.
Compared to conventional measuring systems - based on volume, speed or weight - the REMBE® system measures the product flow inline.
The C-LEVER® II is made without any mechanical moved parts (actuators, pivot bearings, belts). As a resulting from this no post calibration is required. All electronical components are mounted outside of the product flow.
|
|
|
The Brooks QUANTIM® Coriolis mass flow meter/controller offers unsurpassed accuracy and zero stability in critical low flow liquid and gas applications. QUANTIM combines the sensor, transmitter, control valve and PID control electronics into one compact, integrated package, reducing space requirements, and simplifying purchase, installation, and start up. Features include: direct mass measurement is immune to fluid property variations, providing greater application flexibility and reducing spares; repeatable mass flow measurement and control even under changing conditions; multivariable output for mass flow or volumetric flow and density or temperature. Available in NEMA 1/IP40, NEMA 4X/IP65, explosion proof and ANSI/ISA SP-76 downport configurations. Globally approved for a variety of service areas.
|
|
VersaFlow Coriolis 1000 Mass Flow Sensor
The VersaFlow Coriolis 1000 Mass Flow Sensor is a process industry standard suitable for the most demanding applications. The VersaFlow sensor is the only mass flow sensor with a straight measuring tube that is available in Hastelloy®, titanium or stainless steel. VersaFlow reliably measures mass flow, density, volume, temperature, mass or volume concentration, and solids content. The TWC 9000 converter allows easy selection for the output options required and is suitable for mounting in various housing configurations.
|
|
VersaFlow Coriolis 1000 Mass Flow Sensor
The VersaFlow Coriolis 1000 Mass Flow Sensor is a process industry standard suitable for the most demanding applications. The VersaFlow sensor is the only mass flow sensor with a straight measuring tube that is available in Hastelloy®, titanium or stainless steel. VersaFlow reliably measures mass flow, density, volume, temperature, mass or volume concentration, and solids content. The TWC 9000 converter allows easy selection for the output options required and is suitable for mounting in various housing configurations.
|
|
LCMass™ Coriolis Mass Flow Meters
- Sizes: 1/4" through 12"
- Flow Rates: 0.004 lbs/min to 50,000 lbs/min
- End Connections: ANSI Flanged, Threaded, Sanitary
- Pressure Ratings: 150 - 2,500 ANSI
- Materials of Construction: 316 Ti Stainless Steel (Hastelloy and Tantalum available on request)
- Accuracy: Capable of ±0.2% of rate over 20:1 range
- Repeatability: Capable of 0.1% of flow rate
|
|
Digital alternative for a VA meter with totaliser and alarm functions.
MASS-VIEW(r) has an OLED display showing:
- actual flow rate (bar graph and actual value or percentage)
- desired flow units
- type of gas (7 pre-installed gases)
- totalized flow
- min. and/or max. alarm
Other features are:
- Freedom from parallax error
- Virtually independent of pressure and temperature variations
- Low pressure drop
- Wide flow ranges
- Fast response
- High accuracy
- Alarm and counter functions (2 alarm contacts available on meters)
- Analog (0..5 Vdc) and digital communication (Modbus-RTU, RS-232 interface)
- Configurable password protection
- 7 pre-installed gases available (Air, N2, O2, CO2, Ar, CH4, C3H8) or He or H2
- 4 selectable ranges (100%, 50%, 25% and 10% of maximum fullscale range)
- Digitally calibrated
- 3 year warranty
You can order these instruments online and your order is shipped within two working days.
|
|
|
|
|
|
KOFLOC 2503F/2504FR
The KOFLOC Variable Area Flow Meter with Integrated Pressure Regulator MODEL 2503F SERIES uses MODEL 2203 SERIES precision pressure regulator valve to maintain constant flow into the secondary system even under varying load pressure at the outlet. The MODEL 2504FR SERIES uses MODEL 2204 SERIES precision pressure regulator valve to maintain constant flow under supply pressure variance at the inlet. Both models are based on the KOFLOC RK1400 SERIES High Precision Variable Area Flow Meter that employs a flow-tube manufactured with a proprietary glass molding technique. It is a premium variable area flow meter that counters the perception of rotameter as being only good for a rough estimate.
FEATURES
♦ Constant flow under varying pressure.
♦ Highly accurate measurement
♦ Stable flow control characteristics
♦ Sanitary construction for analytical applications
♦ Minute to medium flow ranges
APPLICATIONS
♦ Analyzing system
♦ Pressure digressing situations
♦ Precision measurement
♦ Bio-Engineering
♦ Gas mixing
♦ Flow monitoring
|
|
Barksale offers a range of flow sensors for common flow detection applications for liquid media.
Operation of the BFS flow switch is based on the movement of a spring-loaded piston within a cylindrical tube.
|
|
The variable area flow meters are designed specifically for circulating lube oil.
Features
* Alarms - all types and areas.
* Local indication for trouble shooting when in alarm.
* Transmitter for remote reading.
* Low to no maintenance.
* Calibrated for each specific oil.
|
|
Flowmeters for chemicals, brine or deionized water
These simple variable area flowmeters are real cost effective work horses for corrosive liquids or brines.
PVC, Polsulfone or Tefzel
Visual flow indication
NPT or Van Stone flanges
Micro-switch or transmitter output
Good for brines, corrosives, pure liquids
|
|
| ... products without technical information |
| |
FS5000 Flow Switch Controller
The FS5000 Flow Switch Controller is designed for use in applications that require flow/no-flow control of metering pumps and other devices. It includes a flow switch and three (3) 115V receptacles that are powered with flow and one (1) 115V service receptacle. Power indicator light, flow indicator light and test switch are included.
|
|
Flowcon: Automatic Flow Regulator
Accurate Control and Perfect Process Monitoring
- Precise, stable mold temperature through automatic control
- The development of this unit is based on many years of applied experience.
- Microprocessor controlled accuracy +/- 1°C
- Up to 8 zones can be controlled individually.
- Storage of setup data for 7 different molds
- A tolerance window can be set on the display. If the temperature exceeds the tolerance a buzzer or alarm contact is activated.
- Serial interface for data transfer to lmm standard
- Secures the quality of the molding process by perfect temperature control and monitoring.
- Plunger type solenoid valves with large seat diameter ensure operation even with poor water quality.
|
|
Users of conventional universal display units can have difficulty in making use of their device´s options menu. Special applications require many more functions that are often not available with conventional units.
KRAL BEM 300 to 500 electronic units enhances the KRAL Volumeter performance.
Your advantages:
- Two-channel, i.e. differential measurement.
- Temperature and pressure pulse compensation.
- Measurement conversion.
- 7 point linearization.
- Limit value for a relay output, i.e. regulation of a bypass valve.
- Threshold value for signal suppression.
- Clear and easily readable display.
- Accurate handling by the use of a clear menu structure.
- Multiple mounting options. (KRAL Volumeter, wall, pipe, control panel).
|
|
Pressure controls serve various functions, which may be divided into control and protection functions. Examples for control functions are compressor cycling, pump-down or defrost control. Protection functions include, pressure limiting and cut out against excessive pressures, against loss of charge or for freeze protection.
Our pressure controls are equipped with display scale and pointers to indicate the approximate settings. The display scales are printed in relative pressure units "bar" and "psi". For precise setting of the controls, external gauges must be used.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
|
|
see the results for the following category : 
