|
|
Flow Indicators are designed for continuous monitoring or intermittent use commissioning and servicing hydraulic systems up to 420 bar, 6000 psi.
The large clear 63mm (2 1/2") diameter dial ensures that quick checks can be made to determine pump performance and setting of flow control valves. They can be used on mobile and industrial hydraulic circuits. Also lubrication and coolant systems using oil.
These direct acting flow indicators can be installed in hazardous areas or on applications where no power is available. The flow indicator design ensures good reliability and minimises the effects of contamination.
|
|
Featuring 5 digits of rate and 8 digits of total, the
HIT-2A is a DC, AC, loop or battery powered indicator
capable of accepting magnetic pickup, DC pulse or switch
closure inputs. The unit can be ordered with an optional
loop powered 4-20mA output. The HIT-2A uses the 4-
20mA loop to provide power when this output is used.
|
|
TD 32500 – multi purpose and robust instrument
TD 32500 is a digital flow and volume measurement instrument, which is fitted directly to a SIKA flow sensor, making up a perfect team for any application. Various turbine and gear wheel sensors are available as flow sensors.
The programmable measuring instrument is used for displaying of flow or summing up of total volume. The display can optionally be equipped with an additional measuring input for the resistance thermometer Pt 100, two fast-switching alarm outputs, a frequency divider
output or an analogue output.
TD 32500 consists of a robust stainless steel casing, which can be turned by 180°, thus providing an optimum readability of the display.
The display can be switched between flow, total flow (resettable), fix-volume (non-resettable), and optionally temperature. In addition, a bargraph 0...100% can be displayed for flow, volume, and temperature.
|
|
|
The current family of Scanner EFM Flow Computers represents more than 70 years of measurement expertise culminating in the on-going development of electronic measurement technology. As stand alone units NUFLO flow computers and automation products can collect, display, process and store data for historical and real-time measurement and reporting. As part of an engineered automation system, customers can pick and choose from a variety of options to create solutions tailored to specific requirements. For this reason, NUFLO engineered systems are becoming a standard for major oil and gas production, transmission and distribution companies.
|
|
|
Blancett offers advanced microprocessor-based flow monitors in many mounting options. Units are battery-powered (one "D"-cell 1.5 VDC) or loop-poweed (10-30 VDC). Explosion-proof enclosure also available.
|
|
Flowview 100i
The solution for controlling of stock and consumption. Flexible programming of the Micro-PLC possible. All typical functions of a PLC available. Flexible programming of the visualization and information about connected devices is based on the IEC61131-3 conform programming software. Connecting of different MIB flowmeters via RS-485 interface or the I/Os.
It is also possible to connect foreign devices on the I/Os. Data transmission via Ethernet or GSM is available optionally. The Flowview 100i is a compact All-in-One controlsystem with integrated touchscreen, I/O-Module, networking option and MicroSD card slot.
Due to it´s specially designed high-resolution resistive touchscreen the Flowview is suitable for outdoor and indoor applications. (if mounted in a panel, protection class IP 67)
The Flowview is programmable by the programming software "Cscape". It is possible to control a range of different processes from small to large applications.
|
|
The MICRO-FLOW Sensor is a flow detecting device, used within a semi or fully automated metering process, to detect whether material has been dispensed.
The MICRO-FLOW Sensor does not control the metering volume. It is used particularly when handling unfilled grease with NLGI class 1 to 3, high viscosity oils or silicone-oils.
The MICRO-FLOW Sensor can be adapted to the DOPAG Micro and Mini metering valve as well as to the 417 range of the metering valves.
|
|
Analog Input Flow Indicator - Series FIV
Flow Rate and Totalization
Sight Flow Indicator - Series SF2
1/4 to 1" Connection Size, SPDT or Pulse Output, Window Style
Sight Flow Indicator/Transmitter - Series SFI-800
1/2 or 3/4" Connection Size, Optional Output Sensor Package
Sight Flow Indicator/Transmitter - Series SFI-100T
1/2 or 3/4" Connection Size, Optional Output Sensor Package
|
|
Visoflow WR1-...GM/GK
Mechanical Flow Indicator for liquids, with a rotor for quantitative flow indication in a special tube-shaped glass housing. A signal-red rotor provides a directly flow-proportional indication of the momentary flow-rate. Rugged design in brass or stainless steel.
cleaning mechanism of the internal surface of the glass
visibility of rotor 360°
floating bearing for liquids
grease-free ball bearing for gaseous media
|
|
Rotor Flow Indicator w. Self-cleaning mech. DAA
Flow Indicator with Rotor DAH
Rotating Vane Flow Indicator DAF
Rotating Vane Flow Indicator DIH
Rotating Vane Flow Indicator DIG
Rotating Vane Flow Indicator DKF
Flow Indicator with Rotor DAR
Flow Indicator with Flap DAK
Flow Indicator with Flap and Scale DAZ
Flow Indicator with/without Ball DAB
Flow Indicator with Ball DKB
|
|
|
Pointers of passage who come used for the visual control of the flow of liquids in the pipages, realized or in the flangiata version that in the threaded version, to single and double crystal, realized in grey cast iron, brass, carbon steel, stainless steel until to series PN 25.
|
|
|
With more than a quarter of a million units in operation, in applications around the world, Cameron is the undeniable leader in the design and manufacture of totalizers and flow analyzers. The NuFlo MC Family of Flow Analyzers delivers a broad range of functionality and capability from the straightforward MC-II Totalizer, which provides rate and flow, to the MC-III EXP Flow Analyzer, which utilizes Modbus® communications to download extensive archival logs in less than a minute. The MC Family of Flow Analyzers is ideal for use with Cameron's comprehensive line of turbine meters and performs equally well with all turbine brands on the market today.
|
|
- Propeller, glass tube type
- Liquids application
- 360° visibility
- PPL thread with brass insert
- 1/4" to 2" female thread process connections
- Pmax = 10 bar
- Tmax = 100°C
|
|
|
|
|
|
Delimon's 'Rising Ball' and 'Spinner', the latest design of low cost, 'entry level' flow indicators. These robust indicators out perform other visual flow instruments by a considerable margin. When calibrated flow indicators are not needed, these units will satisfy most requirements within pipe sizes 8mm to 40mm. Being constructed from high quality materials these in-line indicators will meet the needs of many chemical applications, as well as being suitable for water, oil and gases.
The Delimon visual flow indicators start to operate once flow has commenced, this can be from as low as 0.1 LPM. The exceptional ratio between maximum and minimum flow is achieved by carefully toleranced manufacture. When operators require a visual confirmation in their pipework for lubrication and coolant flow, these simple indicators can provide a cost effective solution for plant protection. Including one of these inexpensive fittings to pipework on a power plant may save thousands of pounds in downtime and bearing or pump impeller replacement. Add to this the safety implications resulting from plant failure and the true benefits may be fully appreciated.
|
|
Rotor Flow Indicator w. Self-cleaning mech. DAAFlow Indicator with Rotor DAH
Flow Indicator with Rotor DAHRotating Vane
Rotating Vane Flow Indicator DAFRotating Vane
Rotating Vane Flow Indicator DIHRotating Vane
Rotating Vane Flow Indicator DIGRotating Vane
Rotating Vane Flow Indicator DKF
Flow Indicator with Rotor DAR
Flow Indicator with Flap DAK
Flow Indicator with Flap and Scale DAZ
Flow Indicator with/without Ball DAB
Flow Indicator with Ball DKB
Flow Indicator with Drip Tube DAT
|
|
General description:
This durable, rugged in-line polystyrene device provides immediate visual indication of liquid or gas flow from 95ml/sec. down to 5ml/sec. (or down to 3ml/sec. in fluid with air bubbles removed). Cannot be used with corrosive fluids or over 64ºC (150ºF). Dimensions are 90 x 16 x 55mm (31/2 x 3/4 x 21/8"). Serrated tubulations accept 10 to 14mm (3/8 to 9/16") ID tubing. Per each
Clear polystyrene outer case reveals bright red indicator paddle wheel
- Paddle wheel spins freely with flow
|
|
| ... products without technical information |
| |
* The only two-in-one current/voltage detector designed for electrical testing
* Non-Contact AC Voltage detection
from 12V to 600VAC
* Non-Contact AC Current detection
from 200mA to 1000A
* Sensitivity adjustments to increase or
reduce sensor trigger threshold
* Current sensor detects current flow through shielded wires, conduit, and metal circuit breaker/junction boxes
|
|
* Non-contact AC Current range
is from 200mA to 1000A
* Locates current flow even where
voltage detectors cannot work
* Detects through shielded wires, conduit, and metal circuit breaker or junction boxes
* Sensitivity adjustment for locating wires/conduit through walls
* Audible and visible indication
|
|
|
|
|
|
Reliable fire and system protection:
Differential current monitor type B with pre-warning function, measuring range from10 mA to 3 A.
Early detection of insulation faults can prevent failure of complete electrical plants. Fault current monitoring by measuring differential current is the ideal method for this application. The monitoring requirement for today’s supply systems get more and more complex. Electronic control of drives, switched power supplies and chargers or fluorescent lamps with electronic ballast units can create DC fault currents in the case of earth faults. Standard differential current monitors do not detect this type of faults.
Type B differential current monitor DOLD varimeter IP5883 detects DC and AC fault currents in grounded voltage systems. The measurement is done by an external current transformer.
Contrary to RCD units, IP5883 does not disconnect the mains immediately but signals the fault. The unit includes an easy to read LED bar indicating the fault current and LEDs for operation, pre-alarm and alarm. The measuring range is 10 mA to 3 A. Additional features: broken wire detection, adjustable pre-alarm and test function. This varimeter offers advanced information for specific and cost effective maintenance BEFORE the plant breaks down.
|
|
|
|
|
|
The RCMS system consists of one or several RCMS460-D / -L or RCMS490-D / -L residual current evaluators, which are able to detect and evaluate fault, residual and operating currents in earthed power supplies via the associated measuring current transformers. The maximum voltage of the system to be monitored depends on the nominal insulation voltage of the measuring current transformers used in case of busbar systems, or on the cables or conductors that are routed through.
Closed W...AB series measuring current transformers are required to measure AC /DC sensitive residual currents (0...2000 Hz). Six W...AB series measuring current transformers require one AN420 power supply unit. W... (closed), WR... (rectangular) and WS... (split-core) series measuring current transformers are used for alternating and pulsating currents (42...2000 Hz).
The measuring current transformer series can be used in any combination with the measuring channels of the evaluators. Each RCMS460-D / -L and RCMS490-D / -L utilizes 12 measuring channels. Up to 90 RCMS evaluators can be connected via a BMS bus (RS-485 interface with BMS protocol), thereby up to 1080 measuring channels (sub-circuits) can be monitored.
If this product is to be used for personnel, fire or plant protection, the frequency response can be set accordingly. The measured currents can be analyzed for harmonics.
|
|
|
|
|
|
The AC and pulsed DC sensitive residual current monitor RCMA420-D (Type A) from Bender is designed for fault and residual current monitoring in earthed power supply systems (TN and TT systems) where an alarm is to be activated in the event of a fault, but disconnection must be prevented. In addition, the device can be used to monitor the current in single conductors, such as PE conductors, N-PE connections and PE-PAS connections. Due to the use of measuring current transformers, the device is nearly independent of the load current and the nominal voltage of the system.
The response value can be adjusted in the range of 10...500 mA. When the prewarning level is reached (50% to 100% of the response value), an alarm message is generated. This information achieved sufficiently well in advance can avoid unexpected disconnections and costly downtimes.
Typical application fields are: Residual current monitoring in earthed two, three or four conductor systems; construction site equipment; current monitoring of single conductors de-energized under normal conditions; socket-outlet circuits for devices which are operated unattended for a long time and which may not fail; alarm systems; safety devices.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
