|
|
Flow Indicators are designed for continuous monitoring or intermittent use commissioning and servicing hydraulic systems up to 420 bar, 6000 psi.
The large clear 63mm (2 1/2") diameter dial ensures that quick checks can be made to determine pump performance and setting of flow control valves. They can be used on mobile and industrial hydraulic circuits. Also lubrication and coolant systems using oil.
These direct acting flow indicators can be installed in hazardous areas or on applications where no power is available. The flow indicator design ensures good reliability and minimises the effects of contamination.
|
|
Analog Input Flow Indicator - Series FIV
Flow Rate and Totalization
Sight Flow Indicator - Series SF2
1/4 to 1" Connection Size, SPDT or Pulse Output, Window Style
Sight Flow Indicator/Transmitter - Series SFI-800
1/2 or 3/4" Connection Size, Optional Output Sensor Package
Sight Flow Indicator/Transmitter - Series SFI-100T
1/2 or 3/4" Connection Size, Optional Output Sensor Package
|
|
Visoflow WR1-...GM/GK
Mechanical Flow Indicator for liquids, with a rotor for quantitative flow indication in a special tube-shaped glass housing. A signal-red rotor provides a directly flow-proportional indication of the momentary flow-rate. Rugged design in brass or stainless steel.
cleaning mechanism of the internal surface of the glass
visibility of rotor 360°
floating bearing for liquids
grease-free ball bearing for gaseous media
|
|
Rotor Flow Indicator w. Self-cleaning mech. DAA
Flow Indicator with Rotor DAH
Rotating Vane Flow Indicator DAF
Rotating Vane Flow Indicator DIH
Rotating Vane Flow Indicator DIG
Rotating Vane Flow Indicator DKF
Flow Indicator with Rotor DAR
Flow Indicator with Flap DAK
Flow Indicator with Flap and Scale DAZ
Flow Indicator with/without Ball DAB
Flow Indicator with Ball DKB
|
|
|
Pointers of passage who come used for the visual control of the flow of liquids in the pipages, realized or in the flangiata version that in the threaded version, to single and double crystal, realized in grey cast iron, brass, carbon steel, stainless steel until to series PN 25.
|
|
|
With more than a quarter of a million units in operation, in applications around the world, Cameron is the undeniable leader in the design and manufacture of totalizers and flow analyzers. The NuFlo MC Family of Flow Analyzers delivers a broad range of functionality and capability from the straightforward MC-II Totalizer, which provides rate and flow, to the MC-III EXP Flow Analyzer, which utilizes Modbus® communications to download extensive archival logs in less than a minute. The MC Family of Flow Analyzers is ideal for use with Cameron's comprehensive line of turbine meters and performs equally well with all turbine brands on the market today.
|
|
Featuring 5 digits of rate and 8 digits of total, the
HIT-2A is a DC, AC, loop or battery powered indicator
capable of accepting magnetic pickup, DC pulse or switch
closure inputs. The unit can be ordered with an optional
loop powered 4-20mA output. The HIT-2A uses the 4-
20mA loop to provide power when this output is used.
|
|
TD 32500 – multi purpose and robust instrument
TD 32500 is a digital flow and volume measurement instrument, which is fitted directly to a SIKA flow sensor, making up a perfect team for any application. Various turbine and gear wheel sensors are available as flow sensors.
The programmable measuring instrument is used for displaying of flow or summing up of total volume. The display can optionally be equipped with an additional measuring input for the resistance thermometer Pt 100, two fast-switching alarm outputs, a frequency divider
output or an analogue output.
TD 32500 consists of a robust stainless steel casing, which can be turned by 180°, thus providing an optimum readability of the display.
The display can be switched between flow, total flow (resettable), fix-volume (non-resettable), and optionally temperature. In addition, a bargraph 0...100% can be displayed for flow, volume, and temperature.
|
|
|
The current family of Scanner EFM Flow Computers represents more than 70 years of measurement expertise culminating in the on-going development of electronic measurement technology. As stand alone units NUFLO flow computers and automation products can collect, display, process and store data for historical and real-time measurement and reporting. As part of an engineered automation system, customers can pick and choose from a variety of options to create solutions tailored to specific requirements. For this reason, NUFLO engineered systems are becoming a standard for major oil and gas production, transmission and distribution companies.
|
|
- Propeller, glass tube type
- Liquids application
- 360° visibility
- PPL thread with brass insert
- 1/4" to 2" female thread process connections
- Pmax = 10 bar
- Tmax = 100°C
|
|
Rotor Flow Indicator w. Self-cleaning mech. DAAFlow Indicator with Rotor DAH
Flow Indicator with Rotor DAHRotating Vane
Rotating Vane Flow Indicator DAFRotating Vane
Rotating Vane Flow Indicator DIHRotating Vane
Rotating Vane Flow Indicator DIGRotating Vane
Rotating Vane Flow Indicator DKF
Flow Indicator with Rotor DAR
Flow Indicator with Flap DAK
Flow Indicator with Flap and Scale DAZ
Flow Indicator with/without Ball DAB
Flow Indicator with Ball DKB
Flow Indicator with Drip Tube DAT
|
|
|
Blancett offers advanced microprocessor-based flow monitors in many mounting options. Units are battery-powered (one "D"-cell 1.5 VDC) or loop-poweed (10-30 VDC). Explosion-proof enclosure also available.
|
|
General description:
This durable, rugged in-line polystyrene device provides immediate visual indication of liquid or gas flow from 95ml/sec. down to 5ml/sec. (or down to 3ml/sec. in fluid with air bubbles removed). Cannot be used with corrosive fluids or over 64ºC (150ºF). Dimensions are 90 x 16 x 55mm (31/2 x 3/4 x 21/8"). Serrated tubulations accept 10 to 14mm (3/8 to 9/16") ID tubing. Per each
Clear polystyrene outer case reveals bright red indicator paddle wheel
- Paddle wheel spins freely with flow
|
|
Flowview 100i
The solution for controlling of stock and consumption. Flexible programming of the Micro-PLC possible. All typical functions of a PLC available. Flexible programming of the visualization and information about connected devices is based on the IEC61131-3 conform programming software. Connecting of different MIB flowmeters via RS-485 interface or the I/Os.
It is also possible to connect foreign devices on the I/Os. Data transmission via Ethernet or GSM is available optionally. The Flowview 100i is a compact All-in-One controlsystem with integrated touchscreen, I/O-Module, networking option and MicroSD card slot.
Due to it´s specially designed high-resolution resistive touchscreen the Flowview is suitable for outdoor and indoor applications. (if mounted in a panel, protection class IP 67)
The Flowview is programmable by the programming software "Cscape". It is possible to control a range of different processes from small to large applications.
|
|
| ... products without technical information |
| |
The powerful indicator N1500 offers among its universal input and the 2 relay outputs for the monitoring of the threshold values many other functions. The Min.- and Max.-values can be prompted with just a keystroke. Also there is a Hold and a Peak-Hold Function whose readouts can be deleted using either the function key or the digital input. The high tact frequency of 15 measurements/second (5 measurements/second when using linear input, thermocouples or Pt100) allows the N1500 indicator to monitor fast processes. It offers also the possibility to linearise the measurement signal when using non-linear input signals (mV, V, mA).
Features:
- Universal input
- Linearization of mV, V, mA signals
- 2 Relay outputs
- 6 Alarm features
- Voltage output 24 VDC for external 2-wire transmitter
- Memory for MAX and MIN values, hold and peak features
See more information in our shop:
***www.temperature-shop.de***
|
|
|
|
|
|
MOLTEN METAL TEMPERATURE INDICATOR
PRODUCT DESCRIPTION:
Libratherm offers microcontroller based Molten Metal Temperature Indicator model LMI-2010, which is designed to accurately measure temperature of the molten metals, both ferrous and non ferrous. The measurement of this temperature is a critical process, since the expendable thermocouple is dipped for merely 3 to 4 seconds and then withdrawn. In this short measurement time, the operator is guided through the measurement cycle by audio/visual alarms for thermocouple continuity, measurement in progress and measurement over. Any error in measurement or thermocouple open condition is also immediately detected by activating the audio/visual alarm.
User can select the desired type of thermocouple (either K, R, S, or B type, (depending upon the measuring range from 1200 to 1800oC), and can also set other parameters using front panel key board. During measurement, the indicator ignores the slag temperature and the Average or Plateau reading is determined using the advanced algorithm and the same is latched and displayed on the bright 7 segment 2” LED display. This reading can also be displayed on 4” remote display LRU-2010 and can be logged on to a computer using serial RS485 MODBUS RTU protocol for recording and analysis purpose. Libratherm offers supporting window based software.
|
|
Various sizes displays with or without alarm functions.
Different mounting types f.ex wall or panel mounting.
|
|
- Big keys for use with gloves
- Programmable characteristic curve end points (up to 24 control points)
MIN/MAX value detection,
- Display-Hold
- Auxiliary power output for measuring transducer/sensor
- Optocoupler or relay outputs
- Programmable limit values
- Optional: with serial interface
|
|
|
The Tecal Accu-Temp is a good choice for use as a laboratory grade reference thermometer. It's available in a single or dual channel model, along with direct temperature readout in degrees F, C and ohms. Combine the Tecal Accu-Temp with one of our secondary standard PRT's for a high accuracy temperature measurement system. Don't rely on battery operated, low accuracy hand-held model PRT indicators for your critical temperature measurements.
|
|
Enhanced indicator
Double input Indicator - Transmitter with four addressable alarms
1/8 DIN 96x48
Universal input for temperature sensors, mA, mV, Volt, IR, custom
High level second input 0/4...20 mA, 0/1...5, 0...10 V
3 digital inputs
3 SPST relays NO, 1 SPDT relay
0/4...20 mA retransmission output
4 addressable alarms with delay, latching and blocking functions
ISA sequence on alarms
Display of MIN, MAX value
Hold and temporized hold to display peaks
Dedicated alarm acknowledge key
5 digits 2 colors display with different combinations
RS 485 serial communications
Power supply 100...240 Vac, 24 Vac,dc
Transmitter power supply
IP65 front panel protection
|
|
S1305
Format: 96x96 mm (1/4 DIN)
Installation depth: 122 mm
The universal monitoring instrument
* Instrument with 3 limit contacts
* Universal Input (Pt 100, TC, 0 / 4...20mA, 0...10Vdc)
* Easy handling
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
