|
|
PROPANE FURNACE H4
Unlike the H2 model, it is equipped with 4 burners that can be operated separately and a combustion chamber insulated with ceramic fibre.
Quickly adjustable over a range of working temperatures. Simple ignition, similar to a domestic oven, fed by propane gas. No harmful emissions.
Removable section to facilitate heating bars in the centre. Pressure reduction unit between the tank and the supply tube.
- Anti-flame return valve.
- Thermal device valve.
- Frontal safety screen.
The H4 furnaces comply with the European directives and regulations for the manufacture of MACHINERY.
|
|
Our five basic product groups include coil/foil annealing, solution heat treatment & ageing, log homogenising, ingot heating, melting & holding furnace systems.
We offer advanced technology to reduce cycle times, conserve energy and improve cooling rates. Our control and material handling systems are designed for each unique production environment. With our experience, we are the single source for all your aluminium process furnace system needs and we guarantee the performance of our equipment.
|
|
OVENS FOR TECHNICAL AND ARTISTIC CERAMICS AND PORCELAIN
EMME GROUP designs and builds gas or electricity powered ovens for the ceramics and porcelain sector using the newest and most advanced technology on the market.
Completely safe, simple to use, with close monitoring of the temperature in use, higher uniformity of heat spread and energy saving ability these ovens have the seal of approval of important groups and customers in various sectors nationally and overseas, including:
Our gas and electricity powered ovens include a vast range of products from, ovens for free time use, to the latest models for large and medium industry.
Our technical office can design and produce ovens according to the client’s specific needs.
Experience, professionalism and a good post-sales assistance including technical assistance guarantee the top quality of our products which are all certified and in keeping with current laws and regulations.
|
|
|
|
|
|
INDUSTRIAL ELECTRICAL OVENS
EMME GROUP produces ovens for several different uses, from low temperature (50°C) to high temperature (1,800°C) which have the best resistance among the ovens on the market.
Our production ranges from low temperature ovens to be used in controlled atmospheres to ovens used for free time activities for thermal treatment of metals in controlled atmospheres.
* Ovens for research labs
* Synterization
* Ovens for drying varnish
* Glassworks
* Goldsmiths
* Artistic ceramics and porcelain
* Technical ceramics
* Bakers, pizza ovens and patisserie
* Drying ovens
* Heat generators
* Automatic heating system
* Ovens for free time activities
* Designing of Ovens for specific client needs
Our technical office can design and produce ovens according to the client’s specific needs.
Experience, professionalism and a good post-sales assistance including technical assistance guarantee the top quality of our products which are all certified and in keeping with current laws and regulations.
|
|
OVENS FOR FORGING AND STAMPING HOT
EMME GROUP designs and builds ovens for the heat forging and deformation of metals using the most recent and innovative technologies on the market.
Completely safe, simple to use, with close monitoring of the temperature in use, higher uniformity of heat spread and energy saving ability these ovens have the seal of approval of important groups and customers in various sectors nationally and overseas.
We are able to produce accessories and parts such as hammer, anvil, irons curver and much more.
Our technical office can design and produce ovens according to the client’s specific needs.
Experience, professionalism and a good post-sales assistance including technical assistance guarantee the top quality of our products which are all certified and in keeping with current laws and regulations.
|
|
|
|
|
|
INDUSTRIAL GAS OVENS
Emme Group has 30 years of experience in designing and building industrial gas ovens using the most recent and up-to date technology; some of which is of their own invention.
Completely safe, simple to use, with close monitoring of the temperature in use, higher uniformity of heat spread and energy saving ability these ovens have the seal of approval of important groups and customers in various sectors nationally and overseas, including:
* Foundry metal and aluminum
* Forging ovens
* Sintering
* Heat moulding
* Heat treatment for metals in controlled atmospheres
* Ovens for reserch labs
* Ovens fo drying varnish
* Glassworks
* Goldsmith
* Artistic ceramics and porcellain
* Technical ceramics
* Bakers, pizza ovens and patisserie
* Drying ovens
* Heat generators
* Automatic heating systems
* Ovens for free time activities
* Designing of Ovens fo specific client needs.
Our technical office can design and produce ovens according to the client’s specific needs.
Experience, professionalism and a good post-sales assistance including technical assistance guarantee the top quality of our products which are all certified and in keeping with current laws and regulations.
|
|
OVENS FOR GLASS WORK
Being close to Venice, where glas working is inbuilt into the culture,has enabled EMME GROUP to get a lot of good experience with this fascinating substance.
EMME GROUP designs and builds ovens for this sector using unique systems which make them completely safe, simple to use, with close monitoring of the temperature in use, higher uniformity of heat spread and energy saving ability compared to other ovens on the market.
Our range includes:
* Large capacity fusion ovens
* Continuos or static ovens for hardening
* Panels ovens
* Bending ovens with automatic hardening
* Oven for free time use
Our technical office can design and produce ovens according to the client’s specific needs.
Experience, professionalism and a good post-sales assistance including technical assistance guarantee the top quality of our products which are all certified and in keeping with current laws and regulations.
|
|
|
|
|
|
OVENS FOR GOLD SMITHERY AND THE JEWELLERY INDUSTRY
EMME GROUP designs and builds ovens for this sector using unique systems which make them completely safe, simple to use, with close monitoring of the temperature in use, higher uniformity of heat spread and energy saving ability compared to other ovens on the market.
High technology and continous reserch are used in the whole sector of gold smithing and precious metal work, producing highly innovative ovens which offer good solutions for quality and price.
Our range includes:
* Continuos ovens for re-cooking, deoxidizing, braze welding
* Static ovens for re-cooking, deoxidizing, braze welding
* Fusion Ovens
* Ovens for micro fusion and lost wax casting
* Chain and dust drying
* Post combustor
* Incinerators
Our technical office can design and produce ovens according to the client’s specific needs.
Experience, professionalism and a good post-sales assistance including technical assistance guarantee the top quality of our products which are all certified and in keeping with current laws and regulations.
|
|
|
|
|
|
INDUSTRIAL OVENS FOR MECHANICS
EMME GROUP designs and builds industrial ovens for the mechanics field using the newest and most advanced technology, some of which was designed by the company itself.
Completely safe, simple to use, with close monitoring of the temperature in use, higher uniformity of heat spread and energy saving ability these ovens have the seal of approval of important groups and customers in various sectors nationally and overseas, including:
* Foundry metal and aluminum
* Forging ovens
* Heat moulding
* Heat treatment for metals in controlled atmospheres
* Hardening ovens
* Distension
* Normalization
* Cementation
* Synterization
* Ovens for electrical products
* Ovens for research labs
* Ovens for drying varnish
* Automatic heating system
* Designing of ovens for specific client needs
* Ovens to 1800°C work temperature.
Our technical office can design and produce ovens according to the client’s specific needs.
Experience, professionalism and a good post-sales assistance including technical assistance guarantee the top quality of our products which are all certified and in keeping with current laws and regulations.
|
|
|
|
|
|
|
The continuous measurement of oxygen and COe (combustibles) in cement plants has always been a challenge for any type of analysing probe. Up to now, it’s been nearly impossible to extract measuring gas for continuous analysing systems, because the probe becomes “cemented over and sealed” very quickly, resulting in extremely high maintenance costs and kiln production down time. Now ENOTEC has solved these special analysing problems in the cement industry with the new analysing system called CEMTEC®. Now Cement plants are able to significantly reduce their maintenance costs to a fraction of their previous costs. Mounted in a water-cooled outer jacket, the measuring probe is continuously turning +/- 90°. This keeps the gas inlet area free of cement and prevents the dust build up on the probe filter. Additionally, a highly effective automatic cleaning system with pressurised air ensures that the probe with its dust filter and the gas channels remain completely clean and clear. The InSitu probe measures oxygen using a ZrO2 cell and the COe concentration with a Ga2O3 sensor. The system delivers 2 continuous measuring signals with a response time less than 1 second. In addition, it is also possible to extract flue gas for the extractive type flue gas analysis (SO2, NOx, etc.).
|
|
|
In applications such as ceramics glazing, reducing zones of incinerators, annealing furnaces, and other surface treating processes for metals, it is often necessary to control to a specific oxidizing or reducing condition. These analyzers can measure sub-stoichiometric furnace atmospheres accurately and reliably thereby helping to maintain a consistent product quality.
|
|
Analysis Cabinet, Multigas, Turn On Key
Description :
- Study, Designe and Production of an analysis system where are integrated several kinds of analyzers (ARELCO or other), and a sampling system (manual or automatic).
- Exemple : Gas Analysis in furnace atmosphere for heat treatment application (Steel Industry, Glass Industry).
ARELCO offers global solution for gas analysis in galvanizing line, annealing line, reheating furnace (CGL, CAL, ...).
Measured Gas in this application : O2, H2, dewpoint
|
|
Application : Basket translation in a furnace
Location : Stell Industry
Serapid Product in use : Chain 60 SG
Description : Specific push pull system to load and unload baskets in a furnace
|
|
Handling / Robotics
One specialist (One-stop-shop) to provide you with all mechanical and thermal turnkey solutions you need for drying, heating, curing.
Full control of your process allows us to offer technical solutions that best suit your environment, supporting and conveying your product and keeping it at temperature in hot zones.
CUSTOMIZED DESIGNS FOR :
Automated loading and unloading by robot or manipulator
Coating parts by quenching, wiping or spraying. Tanks and troughs for quenching with or without overflow
Handling and transfers between different positions and in the hot zones
Realisation of stand parts
Creation of special machines, assembly or control stations, mixing stations
Integration of standard equipment
|
|
Of all brazing processes, the most variables are presented when brazing in atmosphere or vacuum. Among these are the type of base and filler metal used, type of atmosphere, dew point, temperature, and even furnace construction. Most furnace brazing pastes are supplied without flux, consisting only of atomized filler metal and a neutral binder.
Fusion offers a full line of controlled atmosphere brazing pastes for various base metals and filler metals. The filler metals include copper and copper based alloys, including copper/phosphorous based systems, silver brazing alloys, and aluminum based filler metals.
|
|
|
|
|
|
Italbras manufactures any kind of brazing paste for any kind of furnace brazing process:
- copper based brazing pastes, used in the furnace brazing of steel and stainless steel, for instance in bathroom radiators industry;
- copper and phosphorous based brazing pastes, used in the furnace brazing of copper and brass, for instance in the copper heat exchangers industry;
- nickel based brazing pastes, used in the furnace brazing of stainless steel, for instance in the automotive and EGR cooler industries;
- Cuprobraze pastes, used in the furnace brazing of copper and brass automotive radiators;
- aluminium based brazing pastes, used in the furnace brazing of aluminium, for instance in the automotive and electrical heating elements industries;
- silver based brazing pastes, used instead of standard brazing alloys;
- active brazing pastes, used in the furnace brazing of ceramic materials with stainless steel.
According to the different brazing processes and to the materials to be joined, pastes can be with or without flux.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
|
|
|
|
The series comprises two instruments:
contrAA 300, the high-resolution continuum source AAS for flame and hydride technology
contrAA 700, a compact, versatile system for flame, hydride and graphite furnace technology, capable of analyzing liquid as well as solid samples in one single instrument.
- Just one light source for all elements
- Sequential multi-element routine as standard
- Unique simultaneous background correction
- High sample throughput
- Rapid readiness for measurement
- Easy to operate and robust
- Independence of hollow cathode lamps
The protracted burn-in time of the light source, necessary for conventional line sources, is now also no longer required, since any drift phenomena are corrected simultaneously. The use of a xenon lamp as a continuous source of radiation opens up the entire wavelength range relevant for AAS for the customer in just one step. Previously, individual methods predominated; now the sequential multielement-routine has become standard. This provides enormous savings in time and cost of materials. The evaluation of molecular absorption bands, allowing the analysis of additional elements, such as sulfur or phosphorus, is a further innovation.
The unique resolution with a spectral bandwidth of below 2 pm/ pixel is decisive for the new quality of the measurement results. Interference is minimized through optimum line separation. Errors, which were caused by the limits of the resolution in traditional line AAS, can be identified for the first time and thereby avoided.
|
|
Can-Eng Furnaces’ Atmosphere Generators are commonly used in conjunction with indirect gas fired or electric furnace systems.
Available in Exo, Endo and Dissociated Ammonia (DA) they prevent surface oxidation and decarburization in neutral hardening situations and as a carrier gas in carburizing and carbo-nitriding furnaces.
•Available in Exo, Endo and Dissociated Ammonia Atmospheres
•Provides a protective atmosphere for a wide variety of thermal processes
•Trouble free proven design
•Automatic burnout features
•Standard Endo 40% 40% 20%
•H2 N2 CO type atmosphere
•Exo Endo Dissociated Ammonia (DA)
•Ideal Length to diameter ratio to enhance reaction time
•Capable of rich or lean design in a wide range of air to fuel ratios
•Water-cooled heat exchanger
•Exo Gas Generator
•Designs available from 500 cfh to 75000cfh.
•Endo Gas Generator
•Standard Designs up to 12, 000 cfh
•Catalyst packed high alloy retorts
•Compact panel design
|
|
Wellman Furnaces, Inc. offers a complete line of Exothermic Gas Generators for rich and lean operation. Standard sizes range from 750 SCFH to 30,000 SCFH. Refrigerated Gas Coolers can be provided to reduce the product gas dewpoint to the 40°F to 50°F range. Atmosphere Gas Analysis Panels are available to monitor the exo gas composition and control an optional trim valve in the burner fuel gas line to maintain the desired CO analysis.
Wellman Exothermic Gas and Steam Co-Generators will give you the process atmosphere gas you need and the added benefit of Free Steam. Major savings in both fuel and cooling water can be realized by combining your exothermic gas generator and steam boiler into a single unit. Paybacks range from six months to two years - Returning Your Initial Investment!
Exo Gas and Steam Co-Generators are available in sizes from 4,000 to 100,000 SCFH of exothermic gas, producing 390 to 9,780 lb/hr of steam.
|
|
| ... products without technical information |
| |
The Plasma Arc Centrifugal Treatment (PACTTM) System provides high processing temperatures (12000 to 16000C) for superior Destruction of hazardous waste and Removal Efficiences (DRE's).
This processing method greatly reduces the volume of the charged material and depending upon the materials chosen to be processed in the PACT, those waste products have potentially profitable uses.
Thermal Processing Equipment offered by SECO/WARWICK is a products range made in Europe, based on RETECH's SYSTEMS LLC knowledge, experience and technology.
Cooperation between SECO/WARWICK and RETECH benefits European customers by metric standards, European parts, CE for European Directives, local sale and after sale service support.
|
|
|
|
