|
|
|
|
|
|
This continuous-rated 30-kW model for platform or onshore oil & gas applications accepts unprocessed flare or economic site gas with up to 70,000ppm sour H2S content. This model is UL-Certified to the Class I, Division 2 / NFPA 496 requirement for placement in areas where explosive gases may be present. A stainless steel version for non-hazardous areas is also available.
Without any exhaust treatment, C30 emissions are much lower than flaring. ISO 9001:2000 certified Capstone Turbine is the world's leading microturbine manufacturer, with more than 3,000 systems worldwide. The installed fleet has amassed more than 8 million hours of documented operation.
Capstone invented microturbines and is the world’s only USA incorporated, USA owned and operated manufacturer.
These inverter-based systems have just one moving part: a turbine shaft supported by patented air bearings. The system has no pumps and needs no radiator, gearbox or other mechanical subsystems. Needs no lubricants, coolants or other hazardous fluids. UL1741, CA Rule 21 and NY PSC interconnect precertified, UL2200, etc.
Scalable from kilowatts to >1 MW without any paralleling switchgear or other external hardware (built-in arraying via computer cables).
|
|
|
These fully weatherproof, sound attenuated, factory installed, enclosures are of extremely rugged construction and made to withstand outdoor exposure to the elements of weather. They incorporate internally mounted silencers for safety and aesthetic value. Modular design principles utilize many interchangeable components permitting onsite repair.
|
|
The new GUASCOR SFGLD series stand out for their toughness and high performance under the hardest working conditions. GUASCOR has applied new very resistant materials in the construction of the SFGLD engines.
On GUASCOR SFGLD engines, load carburation, speed and load are electronically self controlled, so they can operate at constant and limited emissions in spite of variation. The engine adapts to different qualities of gas wich even allows to switch from natural gas to biogas with no stops. A computerised module provides readouts of the spark plugs condition or allows ignition advance to be adjusted through external signals. GUASCOR engines may be fitted with GUASCOR engines can be equipped with a detonation detection and control system. This enables the engine to work under the severest working conditions while avoiding the effects of persistent detonation.
- Reliable
- Efficient
- Economic maintenance
- Environmental-friendly
|
|
Tide Power System products use only the most reliable and competitive components,carefully selected from some of the leading manufacturers.Our product line covers standard and customerized generators for all types of applications from the simplest mobile genset to complex power stations able to supplement
Gas Fuelled
Includes LPG, Natural Gas and Hydrogen fuelled generators,from 25Kva to 1875 kva,Compact with an excellent range of standard features
|
|
High efficiency, low emissions engines designed for the world power generation market. Essential 1, 2 and 3 MW sizes and best-in-class features.
APG3000 Power Generation
The 3 MW APG3000 is designed for the world power generation market with high efficiency, low emissions and best-in-class load acceptance capability.
APG2000 Power Generation
The 2 MW APG2000 is designed for the world power generation market with high efficiency, low emissions and best-in-class load acceptance capability.
APG1000 Power Generation
One of the world's highest efficiency generator sets, the 16 cylinder APG1000 is rated at 1000 kWe at 50 Hz and 1100 kWe at 60 Hz.
|
|
16V-AT27GL Power Generation
The 16V-AT27GL generator set is the preferred choice for demanding applications worldwide, with ratings at 2960 kWe at 60 Hz (900 rpm) and 3250 kWe at 50 Hz (1000 rpm).
12V-AT27GL Power Generation
The 12V-AT27GL generator sets is the preferred choice for demanding applications worldwide, with ratings at 2000 kWe at 60 Hz (900 rpm) and 2220 kWe at 50 Hz (1000 rpm).
|
|
VGF48 Power Generation
The VGF48 generator set is designed for standby and continuous power applications. Waukesha's VGF48 is rated at 625-715 kWe at 50 Hz (1500 rpm) and 750-860 kWe at 60 Hz (1800 rpm).
VGF36 Power Generation
The VGF36 generator set is designed for standby and continuous power applications. Waukesha's VGF36 is rated at 475-535 kWe at 50 Hz (1500 rpm) and 560-645 kWe at 60 Hz (1800 rpm).
VGF24 Power Generation
The VGF24 generator set is designed for standby and continuous power applications. Waukesha's VGF24 is rated at 310-355 kWe at 50 Hz (1500 rpm) and 375-425 kWe at 60 Hz (1800 rpm).
VGF18 Power Generation
The VGF18 generator set is designed for standby and continuous power applications. Waukesha's VGF18 is rated at 230-260 kWe at 50 Hz (1500 rpm) and 280-315 kWe at 60 Hz (1800 rpm).
|
|
Packed with power, engineered for total performance
* More than 60 models from 8.5 to 2800 kW, to match specific requirements
* Exceptional motor starting and voltage recovery
* Configurable to a variety of system needs
* On-site, residential, marine and mobile models
Critical power applications are part of every industry; protecting them starts with reliable KOHLER® generators, available in diesel, gas and LP configurations. Our EPA-compliant diesel models deliver dependable power to a wide range of output requirements. From small-load residential and business to heavy industry, every KOHLER generator is engineered to provide maximum power, performance, flexibility and fuel efficiency.
|
|
VGF48 Power Generation
The VGF48 generator set is designed for standby and continuous power applications. Waukesha's VGF48 is rated at 625-715 kWe at 50 Hz (1500 rpm) and 750-860 kWe at 60 Hz (1800 rpm).
VGF36 Power Generation
The VGF36 generator set is designed for standby and continuous power applications. Waukesha's VGF36 is rated at 475-535 kWe at 50 Hz (1500 rpm) and 560-645 kWe at 60 Hz (1800 rpm).
VGF24 Power Generation
The VGF24 generator set is designed for standby and continuous power applications. Waukesha's VGF24 is rated at 310-355 kWe at 50 Hz (1500 rpm) and 375-425 kWe at 60 Hz (1800 rpm).
VGF18 Power Generation
The VGF18 generator set is designed for standby and continuous power applications. Waukesha's VGF18 is rated at 230-260 kWe at 50 Hz (1500 rpm) and 280-315 kWe at 60 Hz (1800 rpm).
|
|
| ... products without technical information |
| |
|
As biggest European manufacturer of Thermal Transfer Printing systems cab Produkttechnik GmbH presents the print module PX. In comparison to other modules, PX is bolt compatible and is manufactured in robust die cast Aluminum. All established data interfaces are in standard on board. For the integration a special applicator interface has been developed which can be used to solve most of the applications in the material flow process. The graphic operation panel can be removed. The print module is optimized for the industrial use.
|
|
|
|
|
|
The Datamax-O'Neil A-Class Mark II, a next generation print engine, incorporates a number of unique features that are not available in any competitive print engine. The A-Class Mark II establishes a “print and apply” standard that leads the market with innovative design features and quality enhancements to meet the most diverse application requirements.
A unique stainless steel enclosure offers protection from the most challenging environments, like those found at food and beverage manufacturing plants. State-of-the-art electronics offers high performance needed for fast moving, multi-shift assembly lines and high volume label processing. Available with 203, 300, 400 and 600 dpi configurations, the A-Class Mark II offers the broadest range of resolutions for applications where high quality printing is paramount. The printer’s enhanced graphic display for easy set up and operation along with the patented IntelliSEAQ technology for proactive diagnostics and reporting provides increased productivity and effectiveness in any application.
Datamax-O’Neil’s emulation software programs allows the A-Class print engines to operate in competitive software environments, simplifies integration into existing applications and eliminates the need to change label formats.
The A-Class Mark II is offered with an RFID option, which allows users to encode smart labels at the point of print, where most experts agree that encoding should take place to avoid any chance of mismatch between printed and encoded information.
|
|
Engineered to operate in time critical situations, the S ATO S Series delivers unrivalled throughput and easily handles complex labels. Built to withstand
harsh environments, durability is assured, while the choice of interfaces allows integration in almost all systems.
- High Speed Throughput
- Heavy Duty Durability
- 4 and 6 inch print width
- Multilingual display
- Easy connectivity
- Powerful memory
- Windows ® compatible
|
|
The world's largest supplier of OEM print engines, SATO continues to manufacture print engines that are regarded as the standard in the print/apply industry. Designed specifically for integration into automatic print/apply systems, the components of these high-duty cycle engines are selected for reliable performance over extended periods of time. They are available through (OEM) manufacturers of print/apply systems.
- Industry leading through put to meet your production demands
- High-speed 32-bit/133MHz processor to get the label where and when you need it…even when every label is different
- Plug-in interface modules provide complete communication flexibility
- Standard real-time clock provides up to the second production information
- Straight-through label and ribbon path makes changeovers fast and easy
- Standard bi-directional communication provides printer status feedback to the host system
|
|
|
SATO, the world's largest supplier of OEM print engines, manufactures print engines that are regarded as the standard in the "print & apply" industry. Durable and reliable, the enhanced SATO Se series has been proven to be indispensable wherever they are installed. The enhanced Se series offers a 203dpi and 305dpi resolution; 4.5", 5" & 6" wide print head; and right and left hand model. With a speed of up to 12"/sec (only for M-8485Se), this series has been installed with the latest RISC processor, guaranteeing a high throughput speed which is perfect for large graphic data. You can also chose the interface board: LAN, USB, IEEE1284, or even the high speed RS-232C for effortless, flexible integration into nearly all applications. With 4 different models to choose from, SATO offers you the widest selection of OEM models on the market.
|
|
110PAX4
With improved serviceability, a faster first label out time with 12 ips print speed, and a functional RTC, Zebra’s 110PAX4 print engine is designed to meet your demands. If connectivity is a concern, look no further – take advantage of optional 802.11b wireless, 10/100 Ethernet, or European 28V I/O. Print labels from 0.5" (12.7 mm) wide to 4.1" (104 mm) at 203 or 300 dpi resolution.
State-of-the-art technology lets you receive unsolicited Alert condition messages via any e-mail-enabled device or monitor and configure networked Zebra print engines remotely using any standard Web browser. Designed for high-speed, high-throughput applications, PAX OEM print engines are ideal for print/apply systems, including mission critical industrial applications, high-volume product, carton, case, and pallet labeling, and product identification.
|
|
|
|
|
|
The new Datamax A-Class family of print engine products are designed to include some of the most innovative features ever found in a print and apply engine. These massive stainless steel workhorses are intended to be an invisible piece of a bigger part of production equipment, facilitating the process of finalizing production through package identification.
The A-Class consists of both 4-inch and 6-inch wide print engines with 203, 300, 400 or 600 dpi resolution available in both right- and left-hand models. The Datamax A-Class, as a stainless steel product, is designed to address the specialized corrosion resistant needs found in applications such as the food processing industry. The A-Class was developed for demanding multi-shift, mission critical applications that require optimal throughput from an easy to operate, highly durable print engine.
The A-Class utilizes the same electronics card cage design as is found in the popular Datamax I-Class. This allows integrators to choose from a selection of connectivity options to be easily inserted into the card cage. Options include the DMXNet internal Ethernet LAN card, the DMXrfNet internal 802.11b WiFi card, and others.
In addition to a graphical display control panel, the A-Class also includes the Datamax/MCL client which enables truly intelligent applications to be hosted within the A-Class itself. Print and apply integrators and OEMs will appreciate the customization possibilities now available to them through the use of the Datamax A-Class and its MCL application development capabilities.
|
|
| ... products without technical information |
| |
|
Crush the COSTS of replacement PARTS for your mechanical clutch. The power take-off is suitable for inline and sideload applications on all internal combustion engines with standard SAE flywheel housing dimensions. All units are supplied with sealed ball pilot bearings to eliminate lubrication problems normally encountered. Ball bearing throw-out collars are optional on 14" units and standard on 311 units.
|
|
Power take-off
Sunfab’s power take off is the link between the vehicle and the pump. It can be mounted on the gearbox or the engine
|
|
Adapter Kit (Mercedes V12)
Main Data
- Continuous: 500 Nm
- Intermittent: 700 Nm
- Power at 100 rpm: 1152 Kw
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
