|
|
The Elliott Digital Governor (EDG) is a compact, cost efficient, packaged electronic speed control unit for precise, reliable speed control of mechanical drives or induction generators. The EDG has simple push-button control to provide improved reliability and speed control over hydraulic governors without the use of wearing parts such as linkages and bearings. Additionally, it does not require a separate programmer as required by many other speed control methods.
The EDG has numerous standard design features including a large, continiuous LCD display and a wide, continuously adjustable governing range from 200-10,000 Hz. Idle speed, ramp rate and turbine speed are programmable, while electrical trip speed is pre-programmed. Optional features include remote trip and start/stop capabilities. The unit is sized for 19-inch rack mounting and can be configured for NEMA A or NEMA D operation. The standard enclosure is NEMA 4X and is suitable for wall mounting.
|
|
DST2600 is a compact and affordable gen-set controller system for power up to 40kVA.
DST2600 makes available all the functions of a traditional gen-set stand-by panel: full AMF controller with engine and generator protections, contactors for power transfer, battery charge maintainer, power relays for engine commands, measurement systems and display for electrical and other physical quantities.
|
|
|
Tide Powercon electronic intelligence power controller has inlaid high performance computer chips and various functions, such as measurement, control, protection and remote control all in one, and the controlling program and protective parameters can be changed, completely satisfying requirements of users and professional assembly factories on automatic control of different generator sets.
|
|
|
|
|
|
TEM10 are mounted on canopies. They allow the Manual and Automatic operation and the removal of power through alternator by socket protected by switches.
The degree of protection is IP55 in the command part, while it is IP44
in the socket place (IP 55 is an optional and it can be requested with special sockets).
These panels are suitable for being used daily in a generator in safety. Actually, they are characterized by sturdiness, components reliability and a lot of care during assemblying phase. A 10 poles connector (which is placed on the front part of the sockets panel) ,allows to connect to a Mains/generator transfer switch panel (i.e. ATS-E) managed by the Control Panel.
These panels are equipped with all it is necessary for their installation: bolts, power cable to connect to alternator (up to 125Amp), metal plug to be inserted into the panel to connect the engine cables.
They use an electronic device which is named TE806. It is simple and reliable. It is also homologated for being used in the most severe environments with maximum security. All controls related to mains and generators electrical measures and all engine controls are shown on a 4 led digits display. It is an easy and powerful device with a lot of available functions.
|
|
Generator Paralleling Controller – GPC-2
Compact all-in-one control unit designed for applications programmed in a PLC. The GPC-2 contains all necessary functions for protection and control of a synchronous/asynchronous generator along with all necessary galvanically separated 3-phase measuring circuits.
The GPC-2 is intended for land-based applications. It is designed for the following applications (can be combined):
> Stand-alone
> Parallel with other generators
> Parallel with the mains
The GPC-2 can synchronise the generator and after synchronisation carry out all necessary generator control and protective functions. It is well-suited for PLC-controlled systems and the interfacing can be done via binary and analogue I/Os or via (optional) serial communication.
|
|
Generator Paralleling Controller – GPC-2
Compact all-in-one control unit designed for applications programmed in a PLC. The GPC-2 contains all necessary functions for protection and control of a synchronous/asynchronous generator along with all necessary galvanically separated 3-phase measuring circuits.
The GPC-2 is intended for land-based applications. It is designed for the following applications (can be combined):
> Stand-alone
> Parallel with other generators
> Parallel with the mains
The GPC-2 can synchronise the generator and after synchronisation carry out all necessary generator control and protective functions. It is well-suited for PLC-controlled systems and the interfacing can be done via binary and analogue I/Os or via (optional) serial communication.
|
|
DST4601/PX is the evolution of SICES renowned DST4601 AMF controller.
Aimed particularly to parallel application, thanks to its high degree of configuration, it can easily be used in quite all standard and special gen-set applications.
Born to manage the last generation of electronic engine, it supports CAN interface toward quite all most popular engines: J1939 protocol for VOLVO, SCANIA, DEUTZ, PERKINS, CAT, IVECO and MTU protocols for MTU engines.
A large graphic display, with a resolution of 240x128 pixels, allowed to implement a simple to use operator interface that is able, at the same time, to report an huge number of electrical and engine measures and information. Engine troubleshooting now can be made by textual interface (for example all MTU diagnostic codes are translated in plain English text).
|
|
|
It is an easy, sturdy and practical manual panel for generating sets control. It is easy for inspection. It is made in a metal box. It is provided with anti vibrating camping pads. It can be directly connected to the alternator.
|
|
| ... products without technical information |
| |
|
|
|
|
Wellhead Control Panel
Standard:
•API RP14A Subsurface Safety Valve Equipment, Ninth Edition, December 1994
•ASME Boiler and Pressure Vesser Code
•National Electrical Code (NEC)
•API RP 14C
Application:
•Designed ESD system as per latest technical specifications and the actual working conditions. Apply to the effective control of SSV (surface safety valve), SCSSV (surface-controlled subsurface safety valve) and wing valves, etc.
Features:
•Well opening via hand/electric/air-operated pump, meanwhile, it features pressure self-maintaining and automatic compensation, any pressure drop due to ambient temp drop or leakage, the accumulator will automatically compensate the pressure.
•High & low pressure sensors are installed on the wellhead oil transmission line, in case of higher or lower pipeline pressure than the set value, the high and low pressure sensors will cut off the control circuit quickly, thus, the wellhead is turned off.
•In case of a fire on the wellhead, the fusible plug will be melt when the ambient temperature is reaching the melting condition, so that to shut down the wells.
•Automatic pressure relief. Surplus high pressure will be released to maintain the wellhead normal operation whenever temperature changes or mis-operation happened.
•Suit high & low temperature environment (-30~60℃).
•Stainless steel and rational structure design effectively isolates the natural gas and power, safer and explosion-proof.
•Control types: single well with single valve, single well with multi-valve, and multi-well with multi-valve.
•Both manual control and remote control for emergency shut down.
|
|
HAREZMIC MG-7100 SINGLE LOOP INTELLIGENT ANALOGUE ADDRESSABLE
FIRE ALARM CONTROL PANEL
Single loop structure, stylish exterior design and enhanced programmability make the MG-7100 an economical and technologically top-level solution for small and medium sites. EN 54 and SSPB (Russia) and GOST R certified. Approved by Kazakhstan, Oman, UAE, and Bahrain Civil Defence authorities.
Features
Very Intelligent Communication Protocol
Display priority to fire events
Polling interrupt for fast alarm detection
64 x 240 pixel LCD with adjustable blue backlight
Password-protected access levels
Printer output
Displaying detector measurements
Real-time clock
1000 event log memory
Microprocessor-controlled
PCBs made by use of Surface Mount Technology
2 programmable and supervised sounder outputs
3 programmable relay outputs
16 user-defined zones
Loop polling in 7.5 sec
Protection against electromagnetic interference
Auxiliary power supply output
Soft-touch buttons
Built-in silenceable buzzer
|
|
|
|
|
|
MAXLOGIC MG-16160 INTELLIGENT ANALOGUE ADDRESSABLE FIRE ALARM CONTROL PANELS
The latest Maxlogic Analogue Addressable Fire Alarm Control Panel operates on
unique VIP communication protocol which is combatible to use with all MaviGard
Harezmic products. An easy way to use in large sites up to 16 loops and 2032
addresses.
FEATURES
EN54-2 and EN54-4
Compatible with MaviGard Harezmic Series addressable devices.
Up to 64 panels and/or repeater panels can be assembled into a network
LCD (240 x 64 characters) with blue backlight
1000 event log memory
1000 user-defined zones
Extendable loops up to 16 loops, max. 2032 address capasity
Detailed fire alarm and fault warnings
Top priority of fire alarm indication,
different buttons for fire and other events,
caterogical classification due to events.
Real time clock
Communication interrupt for fast fire alarm detection in 1.5 sec
Loop polling in 7.5 sec
4 programmable supervised remote control inputs
Models with printer available
Protection from electromagnetic interference
Communiation with RS232/RS485,GPRS/TCP-IP
Microprocessor-controlled design
Supervised peripheral devices, extension cards (power supply, loop extensions,
printer...)
Day and Night mode, pre-alarm, contamination warning
Virtual panel, supervisor applications
Input/output modules can be connected to panel directly
Advanced control/monitoring features
Creating cause-effect scenarios due to device or zones
By the help of Boot Loader software
updating software on the site
Event selection for input/output devices
Advanced parametric arrangement options for input/output devices
Creating user-defined event type
|
|
CONVENTIONAL FIRE ALARM CONTROL PANELS
MODELS:
MP-8 Series
MG-8 Series
MS-64 Series
SD64+ Series
FEATURES:
Highlights
2, 4, 8, 16, 32, 64 zone models(differs due to panel models)
Zonal Fire and Fault LED indicators
Button control key
Zone Test and Zone Disable modes
Zone location text on front panel
Soft-touch buttons
Microprocessor-controlled
PCBs made by use of Surface Mount
Technology
Supervised Sounder outputs
Supervised Relay outputs
Compatible with all popular conventional fire detectors
Protection against electromagnetic interference
Optional repeater panels
Optional relay modules
Auxiliary power supply output
LED test by use of single button
For more information email us
|
|
General Information
2 loop analogue addressable fire control panel to operate with JSB analogue detectors
Up to 198 addresses per loop
Compact enclosure
16 LED zonal indicators
Specification
Brand: JSB
Dimensions (mm): L330 x D90 x H270
Weight (KG): 5.4
ANA Number: 5021621242384
Cable Entry: Top or rear
IP Rating: IP20
No. of Loops: 2
Standby Period: User specified
|
|
General Information
4 loop analogue addressable fire panel utilisting soft addressing technology and incorporating a highly versatile touch screen user interface.
Supplied with extended autonomy battery and integral printer
Touch screen user interface
Integral battery and power supply
Integral printer
Optional hinged lockable cover
Wide range of compatible interfaces
Specification
Brand: Menvier
Dimensions (mm): L495 X D200 x H400
Weight (KG): 27
Cable Entry: Top or rear
IP Rating: IP20
No. of Loops: 4
Standby Period: Dependant on system loading
|
|
|
|
|
|
FireNET (9th Edition)
Analog Addressable Fire Alarm Control Panel
STANDARD FEATURES
UL 864 9th edition approved
Analog design using Hochiki's advanced DCP protocol for fast and robust communication
Up to 127 sensors & modules, plus 127 analog sounder bases, for a total of 254 points possible per loop
Uses standard wire, no shielded or twisted pair required on SLC loops
Supports Class B (style 4) and Class A (style 6 or 7) SLC loops
4 on board Class B (style Y) NAC circuits rated at 2.5 Amp each
Programmable sensitivity levels per device & automatic day/night sensitivity modes
Automatic daily calibration & drift compensation routine
Large 8-line x 40-character LCD display (320 char.)
2 or 4 loop versions (800 addresses/sub-addr. max.)
Dual RS-485 bus for panel network
2 built-in RS-232 interfaces for programming via a PC and serial printer interface
5 on board programmable Form C relays rated at 1 amp at 30VDC (Fire1, Fire2, trouble, supervisory, aux.)
500mA of auxiliary power available rated at 24 VDC
Loop Explorer Windows® configuration utility
*500 network wide software zones
Network Capability of up to 64 panels
RS485 slave bus for expansion - up to 32 FN-4127-IO boards or up to 15 FN-LCD-S serial annunciators and up to 16 FN-4127-IO boards
Auto-learn feature
Built in help and alarm information screens
Fire Drill test function
Walk Test function
Alarm Verification feature
FireNET is UL listed for Central Station Service when used with the Bosch D9068 contact dialer
Powerful & versatile Cause & Effect programming (up to 500 maximum, network wide) including: *Cause & Effect action, *Disable function configuration, *Test mode configuration
|
|
| ... products without technical information |
| |
GP Pro EX : "all-in-one" Software; screen creation software for new generations of IHM, API and PC.
- Switches, lights, buttons, displaying/keyboarding of data numerical/alphanumeric.
- Alarm management.
- Recipes management.
- Data sampling.
- Graph management with historic data.
- Weekly calendar.
- Password management.
- Data storage on CF card.
- Data export --> PC
- Multi-language management.
- Multi protocoles simultaneously (4).
- Compatibility of projects developed with GP Pro PBIII. No limit on variables.
- Logic program integrated with screen management.
- Simulation.
|
|
Discover Crimson 2.0 – Programming platform for RLC products
Save Time and Money with Red Lion software: You only pay the hardware!
- 200 + drivers included (PLC, speed control, motion control, temperature controllers ..etc..) Check our website to see if we have the one you need. If you don’t, just request it!
- Factory Symbol Library of 4,000 symbols
- Mini SCADA functionalities included in standard like Data & Event
Logging, Recipe handling , web server, remote visualization & control,
“Drag & Drop” intuitive mapping and programming
- Compiler C++ included enabling development of your own protocol as
well management of advance mathematical functions
- OPC/FTP connectivity
- Ethernet gateway functionality
- Help integrate your components in matter of minutes
- Emulator for easy development
- Security manager for action traceability
- SMS and email functions for alarm handling
And all this is FREE – No license fees, free updates – Try it without registration
|
|
|
|
|
|
The Ideal Operator Interface Solution
WebStudio is powerful configuration software for the Gold Series and Ivory Series Panel PCs. It is specifically designed to develop projects for industrial applications such as automation, process control and supervision that will run on industrial PCs using the Microsoft Windows XP or CE.net operating system. The WebStudio software provides you with a versatile collection of development tools to create stand alone or web-based applications for your Panel PC.
WebStudio has an extensive set of features that make it the ideal choice for industrial automation software:
-Objects are customizable
-Create real-time dynamic & animated graphic screens
-Tag database
- Boolean, integer, real, string, array tags, class tags, & pointer tags
-Supports Unicode characters
-Multiple language translation editor
-Support for trending, recipes, reports, historical alarms and events
-Sophisticated local/remote alarm monitoring
-Scripting & math language that supports over 100 functions
-Extensive security options with support for group and user security privileges, and internet/firewall compatibility and protection
-Event scheduler for performing daily events
|
|
Wonderware's world-famous, award-winning InTouch® HMI software for visualization and industrial process control offers outstanding ease of use and simple-to-configure graphics. Version 9.5 provides significant enhancements that result in tremendous improvements in both operational and engineering productivity. Powerful wizards and the new Wonderware® SmartSymbols enable users to quickly create and deploy customized applications that connect and deliver real-time information.
InTouch applications are flexible enough to meet users' immediate needs and can scale to accommodate their future requirements, while retaining the value of earlier engineering investments and efforts. These versatile InTouch applications can be accessed from mobile devices, thin clients, computer nodes and over the Internet. In addition, the open and extensible InTouch HMI offers unrivaled connectivity to the broadest set of automation devices in the industry.
|
|
Wonderware's world-famous, award-winning InTouch® HMI software for visualization and industrial process control offers outstanding ease of use and simple-to-configure graphics. Version 9.5 provides significant enhancements that result in tremendous improvements in both operational and engineering productivity. Powerful wizards and the new Wonderware® SmartSymbols enable users to quickly create and deploy customized applications that connect and deliver real-time information.
InTouch applications are flexible enough to meet users' immediate needs and can scale to accommodate their future requirements, while retaining the value of earlier engineering investments and efforts. These versatile InTouch applications can be accessed from mobile devices, thin clients, computer nodes and over the Internet. In addition, the open and extensible InTouch HMI offers unrivaled connectivity to the broadest set of automation devices in the industry.
|
|
| ... products without technical information |
| |
|
|