|
|
- designed for different production facilities
- based on accumulative roller chain conveyor or roller conveyors with accumulative friction rollers
- pallets or technological support plates (carriers) with transported material may lay directly on chains or rollers
- enable stopping-down of transported material at requested positions (and working on it), its accumulation, unloading of finished products from lines and return of empty pallets (carriers) on the beginning of assembly process
- assembly lines can be supplement with accessories - turntables, transfer tables, lifting or shifting devices, scaling, steel-strapping machine, wrapping machine, packaging machine etc.
- working positions can be equipped with overhead structures for lights, portable tools support rails, other pneumatical or electrical devices
- special lifting and turning equipment allow to manipulate with products on palettes (carriers)
- usually we delivery it with control system in accord with customer's wishes
|
|
|
|
|
|
The Rexroth TS 2plus transfer system is a multi-talented system, which guarantees economic production. It is a diverse modular system that meets the requirements of a broad spectrum of different products.
Special TS 2plus units
Apart from the different types of conveying media (polyamide belts, toothed belts, flat top chains and accumulation roller chains), the TS 2plus also provides an abundance of specific units including curves, transverse conveyors, position and drive units. In addition to this, the time and effort spent on planning and designing can also be reduced to a minimum thanks to the predefined macro modules.
TS 2plus Heavy Duty
The new heavy-duty components of the Rexroth TS 2plus transfer system optimize transport of heavy workpieces on small surfaces. The systematic use of steel parts instead of synthetic ones in critical areas permits continuous loads up to 200 kg per meter. Reinforced conveyor profiles and stainless steel guides combined with sturdy conveyor chains open up new applications in a variety of industries.
TS 2plus Lean
Lower investment and maintenance costs, as well as fast commissioning, are the main features of the TS 2plus Lean. Its easy-to-install components are optimized for small and light products of up to 10 kilograms. Users are thus able to save up to 20 percent right from the procurement phase, as compared to conventional solutions. Low overall costs for linking manual workstations and automatic stations in the TS 2plus Lean system enable streamlined production in, for example, the automotive supplier industry, electronics industry, or medical technology industry.
|
|
|
|
|
|
The Rexroth TS 2plus transfer system is a multi-talented system, which guarantees economic production. It is a diverse modular system that meets the requirements of a broad spectrum of different products.
Special TS 2plus units
Apart from the different types of conveying media (polyamide belts, toothed belts, flat top chains and accumulation roller chains), the TS 2plus also provides an abundance of specific units including curves, transverse conveyors, position and drive units. In addition to this, the time and effort spent on planning and designing can also be reduced to a minimum thanks to the predefined macro modules.
TS 2plus Heavy Duty
The new heavy-duty components of the Rexroth TS 2plus transfer system optimize transport of heavy workpieces on small surfaces. The systematic use of steel parts instead of synthetic ones in critical areas permits continuous loads up to 200 kg per meter. Reinforced conveyor profiles and stainless steel guides combined with sturdy conveyor chains open up new applications in a variety of industries.
TS 2plus Lean
Lower investment and maintenance costs, as well as fast commissioning, are the main features of the TS 2plus Lean. Its easy-to-install components are optimized for small and light products of up to 10 kilograms. Users are thus able to save up to 20 percent right from the procurement phase, as compared to conventional solutions. Low overall costs for linking manual workstations and automatic stations in the TS 2plus Lean system enable streamlined production in, for example, the automotive supplier industry, electronics industry, or medical technology industry.
|
|
|
|
|
|
Transfer lines are suitable for high volume production. If there are requirements for limited part flexibility, a shorter cycle time and if space is an issue, then these requirements can be met. Transfer lines are also indispensible for heavy-duty metal cutting or if high precision machining has to be performed.
The individual machining sequences are divided into several stations arranged in one line (sequential) and connected with a rigid transport system. The single stations can only perform one machining operation as previously defined. The downtime of one station causes the whole line to come to a halt and thus the output goes down to zero.
Transfer lines systems are constructed from modular units. This design ensures that the Transfer lines can be installed quickly in their final position. The individual stations are so-called "hook" stations, and this enables the line to be started up one station at a time.
The main advantages of the standardization of the slide units are:
* smaller stocks of spare parts
* greater flexibility in conversions
* simplified maintenance and overhaul
|
|
Feasibility studies.
Functional studies,
plane of establishment and execution.
Fields of intervention.
Studies and work.
Assembly and production lines.
Robotics.
Handling and convoying on the ground.
Machining - Iron work Mechanic welding…
|
|
PARCELS/CASES LINE
From the empty box up to the palletizer.
Technical Characteristics
We offer a complete service, from calculation of the preliminary study up to the bringing your lines into operation (handling of the electrification and automation).
Function
We work closely with your project structure and machine manufacturers for perfect integration and an optimised output of your lines.
|
|
Cinetic Assembly supplies a complete range of handling solutions, including overhead and floor conveyors, as well as assembly stations.
For all the equipment it installs, Cinetic Assembly:
develops and installs the automation system and the related computerization.
take charge of the turnkey project management, integrating logistics, mechanicals and automation skills and project managers' presence on site.
|
|
| ... products without technical information |
| |
|
|
|
|
Intelligent vibration monitoring
The design of the OneProd MVX system is based on 2 simple principles resulting from over 15 years’ experience in the permanent monitoring of industrial machines:
•Multiple measurements are useless if the operating conditions of the machines are not known;
•All measurement channels must be acquired and processed simultaneously in order to analyse machines with variable speed or intermittent operating.
Operators using many online current monitoring systems are faced with quasi permanent alarms. This comes from the fact that the operating conditions of the machines change, whereas measurement settings remain the same.
With the OneProd MVX system, not only are the operating conditions of the machines taken into account (speed, load, etc.), but data processing is also suited to these conditions. A real monitoring strategy is then implemented for outstanding quality and reliability of the information.
OneProd MVX includes 8 to 32 measurement channels and now allows integrating vibration analysis to electrical analysis based on the additional transducers and solutions of OneProd System (see OneProd ESA data sheet).
|
|
|
The Adash 3600 system is an on-line vibration monitoring system, which is intended for process control and reliability systems, machinery protection systems and generally for all the applications concerning the maintenance and monitoring of machinery condition. Thus, a large variety of applications are possible for motors, fans, pumps, gearboxes, small turbines, bearing diagnostics etc.
|
|
Vibra-Metrics built the patented Sensor Highway (Pat.# 5,255,565) to provide plant managers with a low-cost, modular solution for achieving advanced on-line monitoring of critical equipment parameters such as vibration, temperature, pressure, and almost any other parameter. It also holds the key to success: better Return on Investment. Companies must get substantial benefit from predictive maintenance (PdM) cost outlays, especially the expenditures for equipment monitoring. The Vibra-Metrics' expandable Sensor Highway System offers advantages over traditional predictive maintenance programs such as increased data collection frequency, more repeatable/accurate data, easier trending analysis, and more efficient use of your PdM Staff.
The bottom line: a PdM system like Sensor Highway can return up to five time the investment in a short period of time.
|
|
| ... products without technical information |
| |
|
|
|
|
Intelligent vibration monitoring
The design of the OneProd MVX system is based on 2 simple principles resulting from over 15 years’ experience in the permanent monitoring of industrial machines:
•Multiple measurements are useless if the operating conditions of the machines are not known;
•All measurement channels must be acquired and processed simultaneously in order to analyse machines with variable speed or intermittent operating.
Operators using many online current monitoring systems are faced with quasi permanent alarms. This comes from the fact that the operating conditions of the machines change, whereas measurement settings remain the same.
With the OneProd MVX system, not only are the operating conditions of the machines taken into account (speed, load, etc.), but data processing is also suited to these conditions. A real monitoring strategy is then implemented for outstanding quality and reliability of the information.
OneProd MVX includes 8 to 32 measurement channels and now allows integrating vibration analysis to electrical analysis based on the additional transducers and solutions of OneProd System (see OneProd ESA data sheet).
|
|
|
The Adash 3600 system is an on-line vibration monitoring system, which is intended for process control and reliability systems, machinery protection systems and generally for all the applications concerning the maintenance and monitoring of machinery condition. Thus, a large variety of applications are possible for motors, fans, pumps, gearboxes, small turbines, bearing diagnostics etc.
|
|
Vibra-Metrics built the patented Sensor Highway (Pat.# 5,255,565) to provide plant managers with a low-cost, modular solution for achieving advanced on-line monitoring of critical equipment parameters such as vibration, temperature, pressure, and almost any other parameter. It also holds the key to success: better Return on Investment. Companies must get substantial benefit from predictive maintenance (PdM) cost outlays, especially the expenditures for equipment monitoring. The Vibra-Metrics' expandable Sensor Highway System offers advantages over traditional predictive maintenance programs such as increased data collection frequency, more repeatable/accurate data, easier trending analysis, and more efficient use of your PdM Staff.
The bottom line: a PdM system like Sensor Highway can return up to five time the investment in a short period of time.
|
|
| ... products without technical information |
| |
The PSX307 plasma cleaner provides 1.5 times the productivity of conventional models. Parallel plate chamber technology delivers superior etch uniformity over conventional batch systems.
Ultra-thin gold-plated electrodes can be wire bonded reliably without nickel compound formation via argon plasma treatment. Gold plating savings alone can provide ROI justification.
Other capabilities include surface modification by oxygen plasma improving mold resin adhesion and under-fill wettability, and reducing incidence of peel-off, voids, and cracks.
Panasonic plasma cleaning equipment sets the standard; thereby, refining tomorrow's technology today.
|
|
| ... products without technical information |
| |
AP&T has several production solutions for customers who require large volumes and details that require multiple operations.
This type of production solution is well suited for running cut blanks, circular as well as square, or for coil feeding directly into the press.
The tool set in this plant consist of several tools and tool changes are easily carried out through the long side of the press.
The hydraulic press runs continuously and has robust guidings for the best possible absorption of deflection forces.
The transfer feeder is especially designed for press automation with tool sets in multiple steps. The machine has three axes and is mounted directly on the press frame. The transfer feeder rails, where the gripper fingers are mounted, are easily exchanged when running different products.
The plant is equipped with an operator's terminal for optimal control and supervision of the entire press line. This terminal controls and supervises all machines in the line.
|
|
|
5-Press line for manufacturing of wheel parts. The line consists of 5 x ZM presses, 6 x SpeedFeeders CD between the presses for maximum flexibility, 1 x blank destacker BF, safety system and a service platform.
|
|
AP&T has several production solutions for customers who require large volumes and details that require multiple operations.
This type of production solution is well suited for running cut blanks, circular as well as square, or for coil feeding directly into the press.
The tool set in this plant consist of several tools and tool changes are easily carried out through the long side of the press.
The hydraulic press runs continuously and has robust guidings for the best possible absorption of deflection forces.
The transfer feeder is especially designed for press automation with tool sets in multiple steps. The machine has three axes and is mounted directly on the press frame. The transfer feeder rails, where the gripper fingers are mounted, are easily exchanged when running different products.
The plant is equipped with an operator's terminal for optimal control and supervision of the entire press line. This terminal controls and supervises all machines in the line.
|
|
|
AP&T´s niche tools and production solutions are available in product areas like deep drawing, fire extinguishers, heat exchangers, pressure vessels and filter housings. The tooling for air duct parts include part types: saddles, elbows, reducers, bellmouths & endcaps. EU-standard - approx 120 part sizes. US standard - approx 170 part sizes.
|
|
|
AP&T´s niche tools and production solutions are available in product areas like deep drawing, fire extinguishers, heat exchangers, air duct parts, pressure vessels and filter housings. We manufacture press lines for producing fire extinguisher shells in sizes from 1 to 12 kg and blank thickness from approx 1,4 to 2,5 mm.
|
|
|
AP&T´s niche tools and production solutions are available in product areas like deep drawing, air duct parts, pressure vessels, filter housings and heat exchangers. We have world wide experience of supplying production lines for heat exchanger plates, for brazing or gaskets, and in thickness from approx 0,4 to 0,9 mm.
|
|
Press-line
We design and build complete press lines with automation as one responsible partner
According to certain application method, we also design and install automation interface to existing presses, in order to get the press as an integrated part of the system;
|
|
Integrated production projects
The internal synergy of a company with ample qualification in the construction of a diversified range of internationally acclaimed products, closely-structured collaboration with the most trusted die makers, and the acquisition of a controlling share in a special machinery manufacturer have enabled Omera to acquire the enviable technological background that background that has now permitted the development of reliable, technologically advanced automatic production lines combined with top-notch service for even further additional success.
Perfect interaction between customer and supplier leads to the growth of both and permits the design and construction of numerous systems in diversified sectors.
|
|
|
|