|
|
|
The UC-2000 Universal Laser Controller provides an easy user interface for total control of laser power, duty cycle, and modulation frequency. Power control is achieved by pulse width modulation (PWM) at selectable clock frequencies of 5, 10, and 20 kHz. Compatible with Synrad's entire line of CO2 lasers, the all-digital UC-2000 features an easy-to-read LCD screen and easy set-up. Available in standard or rack-mountable packages.
|
|
|
|
|
|
General description:
The SurfBoard-USB is a fully featured board, which provides reliable performance for controlling and synchronizing I/O, 2 and 3-axis scan heads and virtually any laser. The board can operate from any PC platform with a USB port - including laptops and embedded PCs. Gone are the days of opening a bulky desktop to install a board or worrying about address or IRQ conflicts. The SurfBoard-USB is a truly plug-and-play product.
Measuring only 10x10cm, the SurfBoard-USB operates with Windows XP / Vista on NTI's industry leading WaveRunner laser / scanner control software. Your laser scanning system will not be waiting for data with the incredibly fast USB 1.1 or 2.0 PC interface and the 10 micro second laser / scanner update rate. The board includes on-board flash memory to store large jobs, plus 6 inputs and 6 outputs used for automation and a pointer control, mark-in-progress signal, start mark signal, and mark-on-the-fly encoder inputs. Scan head control is through an industry standard XY2-100, 16-bit digital interface or an optional analog interface. Laser control is provided via standard PWM, analog or 8-bit digital signals.
Each board is packaged in a small, rugged enclosure, which can be remotely mounted to facilitate easy system installation. And don't worry about losing your software dongle, because with the SurfBoard-USB, there is no software dongle required.
|
|
Laser Controller
The Laser Controller LC201 is the control- and operation-module for all of the Taufenbach laser systems.
The power and the frequency of the lasers can be adjusted.
The system is provided with a key switch, an emergency switch and inputs for external interlock circuits so that laser systems complying with the demands of laser class 4.
The housing is designed as a 19“-rack-mountable package.
- For all Taufenbach Lasers
- Laser class 4
- Power control - adjustable from 0 to 100 %
- Frequency control - adjustable from 1 Hz - 100 kHz
- Key switch
- Emergency switch
- 2-channel interlock
- Small rack-mountable package (19”)
|
|
The Vitesse family of laser drivers are production-proven and include variants optimized to each of the optical module applications.
Key Features
- Built-in support for IEC-60825 eye safety (VSC7964, VSC7966, and VSC798x)
- Duty cycle, output modulation, and output bias level controls (VSC7980, VSC7981, and VSC7982)
- Programmable output data eye crossing point (VSC7983 and VSC7984)
- Integrated limiting amplifier (VSC7964 and VSC7966)
- Internally stabilized modulation and bias outputs (VSC7983 and VSC7984)
|
|
|
EKSPLA manufactures high efficiency pump chambers for pumping of various active elements (Er:YAG, Er: YLF, Nd:Glass, Nd:KGW, Nd:YAG, Nd:YLF, Nd:YVO , Yb:YAG, etc.
|
|
PS5021 flashlamp driver is designed for pumping of variable or long pulse width solid-state lasers. It features variable pumping pulse in 0.1-2 ms range and output voltage of up to 450 V. This power supply can be remotely controlled through RS232 interface.
FEATURES Excellent pulse-to-pulse stability. The charger is based on resonant inverter topology which is most efficient way to charge capacitive loads. Innovative design of charger circuit allows to charge capacitor bank with an excellent precision of 0.1%.
|
|
The OP750 multichannel source can be configured for a mix of up to 24 individual or switched LED or laser sources.
A single wavelength LED sources feature and internal large core fiber to guarantee an overfill condition into 62.5/125 or 50/125 multimode fiber available for the wavelength 850nm and 1300nm.
The single wavelength sources for 1310nm and 1550nm are terminated with standard 9/125 fiber. A dual wavelength option, 1310nm and 1550nm into a single port is available as well (12 channel version only).
|
|
|
The PDL 800-B is a stand-alone driver for the picosecond diode laser heads of the LDH-Series (375 to 1550 nm) as well as for the sub-nanosecond pulsed LEDs of PLS-Series (260 to 600 nm). These laser heads can emit light pulses as short as 70 ps FWHM (50 ps on selection) at repetition rates from single shot up to 40 MHz with peak powers up to 1 Watt. The PDL 800-B features easy-to-use controls for pulse width, repetition frequency and laser power level.
|
|
|
|
|
|
These YAG lenses range in focal length from 20 to 150mm. They consist of either two or three air-spaced glass elements mounted in a metal cell. The lenses all have a 30mm clear aperture but they are recommended for use with beams not exceeding one inch in diameter. Two different designs are used - the 20, 30, 40, and 50mm focal length lenses have three elements, but the 60, 80, 100, and 150mm lenses use simpler two element designs. These lenses are Anti-Reflection coated with a high damage Narrowband Multilayer Anti-Reflection coating optimized to give less than 0.5% reflectance per surface at 1064nm.
These lenses are chromatically corrected so that a HeNe guide beam or a visible range video monitor beam will be in focus at the same position as the YAG beam.
Spot size or beam waist is inversely proportional to the numerical aperture at the effective beam diameter. The spot size given in the table is for a full aperture beam. Let us know your imaging requirements and we will be pleased to advise you on the appropriate lens for your application.
Since these lenses are often used with high power lasers we offer optional protective windows which can be attached to the focusing side of the lens. In the event of inadvertent back reflection of high energy beams into the lens it is likely that the window will absorb the incident energy and shatter preventing further damage to the lens itself. Protective windows are offered uncoated in packages of ten pieces. For optimum performance we advise that the protective windows be Anti-Reflection coated with our A46 V Coat at 1064nm.
|
|
|
|
|
|
Precision Photonics offers superior quality mirrors and coatings at a great value. We use only ion-beam-sputtered (IBS) coatings because IBS coatings are significantly more dense, durable, and rugged than conventional e-beam or ion-assisted evaporated coatings. Compared to other coatings, IBS coatings also offer lower scatter and absorption losses and fewer pin-hole defects in the coated surface. This superior film quality and uniformity results in environmentally stable optics with laser damage thresholds of >40 joules at 1064nm.
The SBB super broadband mirrors are ideal for beam-steering applications using both the fundamental laser wavelength and one or more harmonics within the same beam path. Because it is an all-dielectric design, they can handle the high laser powers of both CW and pulsed systems, without limiting the useful angle of incidence or sensitivity to varying states of polarization.
The MPM mirror has been specially designed for multi-photon applications requiring high reflectivity, broad bandwidth, low dispersion and high transmission in the visible spectrum. All our laser mirrors are ion beam sputtered; thus the coatings are dense, easy to clean and insensitive to moisture.
|
|
These laser mirrors are designed for specific wavelength laser applications where low wavefront distortion, low scattering, and high reflectivity are usually important. The reflectance is greater than 99.5% at the specified wavelength. Typically the s-polarization is greater than 99.9% and p-polarization is close to 99.5%.
Possible surface damage from higher power laser beams is minimized by careful polishing and precisely controlled coating methods.
As with the broadband mirrors, standard diameters are 1/2 inch, 3/4 inch, 1 inch and 2 inches. Other diameters are available on request. Other laser wavelengths can also be provided so please call.
|
|
|
All-Digital Scan Head Components. Advancing the State-of-the-Art of Galvo-Based Laser Steering Systems, Cambridge Technology has a full complement of All-Digital Scan Head Components allowing you to simplify your system integration while cost-effectively providing your customers with the fastest, highest performing, highest marking speed, intelligent laser scanning capabilities worldwide. Self-tuning digital servos with real-time status back-channels, ethernet-based marking system controllers, USB-based all-in-one controller/servos are all available to complement the wide selection of high-speed, high-stability galvanometers and lens-ready open-frame mounting blocks.
|
|
|
|
|
|
The Model 3211 is a workhorse amplifier for driving capacitive loads such as broadband electro-optic (EO) modulators and piezoelectric transducers.
The Model 3211 incorporates high-slew-rate, high-voltage operational-amplifier technology to give you extremely precise linear operation over a wide range of input voltages and frequencies. The ±200-V output will swing our broadband EO modulators (pages 43, 45) through 180° of phase shift with bandwidths of up to 0.6 MHz. The peak-to-peak output noise is less than 100 mV in a 1-MHz bandwidth.
The front-panel controls include an easy-to-reach, high-voltage on/off switch and a DC off-set that sets the output level anywhere from - 200 V to +200 V, allowing an EO amplitude modulator to be biased for optimum linearity without additional components. Two inputs allow signals from separate sources to be sum-med and amplified. Two bias outputs of +200 V and - 200 V allow single-polarity operation for piezoelectric transducers and other compo-nents. A monitor output provides 1/30 of the output voltage for display on an oscilloscope.
|
|
CAD-PRO 2D laser projectors are optimized for projection on flat surfaces.
LAP laser projectors can be equipped with either one or two laser sources. You may select red, green or multicolor (red, green and yellow) projection.
CAD-PRO 2D display templates or outlines from CAD data. Display to correct scale is given by calibration, using targets at previously measured positions.
Large area projection is done with several projectors positioned side by side. Load balancing is included in PRO-SOFT display software.
Step by step workflow may be supported by using structured data files.
|
|
CAD-PRO 3D are optimized for laser template projection on curved surfaces.
Working with complex surfaces requires 3D display calculation. CAD-PRO 3D laser projectors are equipped with special hardware, high-speed firmware and 3D software to meet this challenge.
For large area projection, several projectors may be combined. They serve bordering projection areas with flexible overlap. Load balancing distributes the projection according to area and reach of the joined projectors.
Maintenance or defect is no reason for production downtimes: LAP CAD-PRO are small, light-weight and only connected by one cable. Your personnel may change a projector within minutes, helped by the one-screw tilt bracket and scaffolds with lowering mechanism.
|
|
|
Throught the history of the integration circuits, the limits of optical lithography have been continously extended by innovations in short - wavelength sources
|
|
Designed for Maximum Reflectivity of CO2 Laser Beams
Mirrors are mainly used for beam delivery systems. These mirrors are designed for high reflectivity, by selecting substrate materials and coatings according to application requirements. Mirrors are not used only to simply deflect a laser beam, they also used to control the polarization of a laser beam (Phase Retarders).
- Gold Coated Copper Mirrors
- Molybdenum Coated Copper Mirrors
- Molybdenum Mirrors
- EG Coated Silicon Mirrors
- 1/4 Phase Retarders
- Zero Phase Shift Mirrors
|
|
PS5050 model flashlamp driver is designed for flashlamp-pumped lasers and establishes itself as an updated version of PS5010 driver. PS5050 features microprocessor control and back illuminated LCD display where all output parameters of power supply are conveniently displayed.
Flashlamp driver comprises one or several charging modules, a discharge and simmer module and a control circuit. Such design allows the unit to be operated with the utmost ease and convenience. The unit is fitted into a 19" standard housing and may be comfortably mounted in your power supply stands. The unit is manufactured in conformity with EN61010 and EN55011 standards.
Driver can be remotely controlled through RS-232 and CAN (Controller Area Network) interface.
|
|
- Laser diode current source with integrated 32W temperature controller
- Three models available with up to 4A laser drive current
- GPIB/IEEE-488 remote interface
- High stability, low noise laser current source operating in constant power or constant current modes.
- Analog modulation capability to 1MHz
- 4-wire laser forward voltage measurement and adjustable voltage limit
- Temperature controller compatible with thermistor, IC, and RTD temperature sensors
- Temperature stability of ±0.004°C
- TE voltage measurement
|
|
|
The OP250 is a configurable stabilized light source with a variety of Lasers and LEDs. Available in a single port or dual port configuration, selectable wavelengths, and various power levels and industry standard optical interfaces this instrument offers all the features and functions necessary for the development, testing and inspecting of optical components and cables.
|
|
|
Optida Co. design and produce various configuration laser optical components like High-Reflection Laser Mirrors. Components could be optimized for any coupling and rezonating wavelengths.
|
|
Research Electro-Optics, Inc. (REO) produces laser components with the highest performance and greatest reliability worldwide utilizing its superior optical fabrication, superpolishing, and precision thin film coating capabilities. REO manufactures high reflector mirrors, output couplers, beam steering optics, edge filters and Brewster windows which offer the best available performance in terms of scatter, absorption, spectral characteristics, stability, laser damage threshold, and plasma durability.
Features
Superpolished Substrates
Plano and Spherical Optics (1 cm to infinity radius of curvature)
Ultra Low Scatter & Absorption (as little as 1part per million)
Ultra High Laser Damage Thresholds
Ion Beam Sputtered Coatings
Mirrors with Extremely High Reflectivity (up to 99.999%)
Extremely High Ultraviolet and Plasma Durability
High Moisture and Temperature Stabilities
Applications
Lasers (244 nm - 3.39um)
Inter Cavity Optics
Frequency Reference Cavities
Optical Instrumentation
|
|
General description
- Laser in red or green. (Choice of colour for an optimal visibility depending on the colour of the projection surface and / or the material.)
- Saving of time and material through an optimised operating process
- Quality control
- Increase in productivity
- Projection of continually changing figures of any shape with a high projection exactness and quality
- Precision high speed scanner
- Mounting flange with a variable orientation to all 3 directional axes
- Temperature stabilised (Peltier cooling) diode laser
- Modulating laser sources, i.e. no disturbing connecting lines are visible
- Positioning devices or tape measures are not needed any longer. Efficiency and quality are optimised.
- Online rotation and adjustment of the projection.
- Full size display of CAD data and other formats!
- Easy operating with extensive software
- CE-conformity-labelling
- Laser class 2M
|
|
Power for the World Market Leader
High power lasers can be used for applications such as cutting, welding and marking. This non-contact method of material processing offers many advantages such as flexibility, high speed and superior quality. Lasers simplify the entire fabrication chain.
TRUMPF, the leading manufacturer of laser systems for material processing in the world, trusts our power supplies.
HÜTTINGER manufactures reliable power supplies for laser excitation in CO2 lasers.
|
|
* 0~60A Continuous Wave Output
* Voltage self-adaptive control, no need of manual setup
* Inside/Outside control
* Inside timer
* With high-stabilization, anti-interference ability
* Over current, over voltage and water cooling system protection
|
|
MDG mirror series was designed to meet any protection need when it is necessary to realize a perimetrical protection.
It is possible to use them with every SB4/SB2 safety barrier. Thanks to the easy installation and excellent performances, this product is extremely versatile and suites the varied applications. This mirror series was born to meet any protection need it is necessary to realize a perimetrical protection.
|
|
Custom IBS Coatings for Laser Windows, Mirrors and Beamsplitters
Easy to clean and chemically resistant
Dense, non-porous structure is insensitive to moisture
Low scatter and absorption losses result in high-damage thresholds
Repeatable, highly controlled process for precise layer control
In addition to a variety of off-the-shelf laser optics, PPC offers custom high-energy coating design and manufacturing from 266 nm to 2200 nm. At PPC, we use ion-beam sputtering (IBS) technology because IBS is a repeatable and controllable process that results in dense, durable, high-damage-threshold thin films that are resistant to changes in heat and humidity, even in a vacuum environment. Coatings can be done on customer supplied materials or we can provide you with complete finished optics in as little as 48 hours!
Coating Types
• High reflectors to >99.995%
• Anti-reflection (ARs) to 98%
• Low dispersion mirrors
• Broadband dielectric mirrors
|
|
We offer an extensive list of subcomponents for building high-quality Fiber Lasers. We design and manufacture Yb and Er/Yb cladding pumped fibers, power combiners in 7:1 and 19:1 configurations, multimode launch fibers to match input fibes, metalization and ferrules for diode subassemblies. Other building blocks and capabilities include: large mode area fibers, end preparations, fiber Bragg gratings, and connectorization.
Cladding Pumped Fiber Lasers (CPFLs), Cladding Pumped Fiber Amplifiers (CPFAs), and Gain Modules are designed and produced in-house to meet your specifications.
|
|
Flat-Top2:
StockerYale's Flat-Top² Generator is a laser beam shaping module that converts a Gaussian beam into a focused, collimated, or diverging flat-top profile. This innovative product can maintain a high degree of uniformity, power, and intensity over large distances.
The Flat-Top² Generator is compatible with lasers that emit at UV, visible and near-IR wavelengths. The module can be easily integrated with our world-renowned Lasiris™ lasers, as well as other laser types, both standard and fiber-coupled.
|
|
|
|
