|
|
- Laser diode current source with integrated 32W temperature controller
- Three models available with up to 4A laser drive current
- GPIB/IEEE-488 remote interface
- High stability, low noise laser current source operating in constant power or constant current modes.
- Analog modulation capability to 1MHz
- 4-wire laser forward voltage measurement and adjustable voltage limit
- Temperature controller compatible with thermistor, IC, and RTD temperature sensors
- Temperature stability of ±0.004°C
- TE voltage measurement
|
|
|
The OP250 is a configurable stabilized light source with a variety of Lasers and LEDs. Available in a single port or dual port configuration, selectable wavelengths, and various power levels and industry standard optical interfaces this instrument offers all the features and functions necessary for the development, testing and inspecting of optical components and cables.
|
|
Flat-Top2:
StockerYale's Flat-Top² Generator is a laser beam shaping module that converts a Gaussian beam into a focused, collimated, or diverging flat-top profile. This innovative product can maintain a high degree of uniformity, power, and intensity over large distances.
The Flat-Top² Generator is compatible with lasers that emit at UV, visible and near-IR wavelengths. The module can be easily integrated with our world-renowned Lasiris™ lasers, as well as other laser types, both standard and fiber-coupled.
|
|
MAIN FEATURES
- Mode-hop-free
- Single longitudinal mode
- Long coherent length: >15 meters
- Circular beam available
- High wavelength stability
- Extremely low noise
- Small size and low cost
- CDRH compliant: key switch and emission
indicator
MAIN APPLICATIONS
- Holography
- Interferometry
- Metrology
- Spectroscopy
- Laser gauging
|
|
FEATURES:
- Ultra Low Noise: <10mA*
- High Current without Heat Sink: 1A
- High Absolute Accuracy: <0.1%
- High Stability: 100ppm/°C
- Dual Modulation Ports: High/Low Speed
- Low Drop Out Voltage: 1V
- Complete Shielding
- Compact Size
- SMT Package Available
- *Total RMS between 0.1Hz to 0.5MHz.
APPLICATIONS
- Driving diode lasers with low noise, including DPSSLs,
EDFAs, fiber lasers, diode laser modules, etc.
|
|
| ... products without technical information |
| |
|
As automated processes are increasing in number and steadily being integrated into new industrial areas, the requirements for industrial sensors are also increasing. Special attention lies on quality, reliability and availability. Our industrial-use sensors are designed to allow easy integrability, but also to provide a maximum in productivity. Equipped with standard interfaces, they may conveniently be integrated into manufacturing lines or host systems.
|
|
Characteristics
Position sensing (also of moving targets) up to a distance of 240 m. With reflector.
Type LE-200
Measuring range 0,2 - 240 m
Resolution (max.) programmable 0,1 mm
Accuracy (typ.) +/- 2 mm
Reproducibility (max.) /- 2 mm
Characteristics
Position sensing of quasi-static targets without reflector up to a distance of 65 m, with reflector up to 500 m
Type LLB-60 D
Measuring range
0,05 - 65 m without reflector
0,05 - 500 m with reflector
Resolution (max.) programmable 0,1 mm
Accuracy (typ.) /- 1,5 mm or /- 3,0 mm according to device type
|
|
| ... products without technical information |
| |
The 300-0600-00 series of Thermo-Electrically Cooled, (TEC), red and infrared laser diode modules offers exceptional wavelength and power stability, (better than 1%), good pointing accuracy and significantly increased laser diode lifetime.
Designed for applications demanding consistency and repeatability such as machine vision, alignment, industrial inspection, high-resolution printing, biomedical instrumentation, spectroscopy, microscopy and genomics, the TEC laser modules are compact, versatile and highly cost effective.
The laser module produces a circular output beam and output powers of 0.9mW to 32mW at 635nm, 25mW at 690nm, 55mW at 785nm and 24mW to 120mW at 830nm.
We can fit almost any laser diode in a 9mm or 5.6mm package into our TEC laser modules. If you need a wavelength or power that we do not offer as standard, please contact our sales team to discuss your requirements.
|
|
Powerline lasers:
StockerYale’s Lasiris™ PowerLine structured light laser is a line generator developed for demanding industrial machine vision and scientific applications. Bridging the power gap between the popular SNF and Magnum series lasers, this thermoelectrically cooled device is able to emit uniform laser lines at high powers, up to 1 W at 810 nm and 500 mW at 670 nm.
With exceptional beam pointing and focusing stabilities, the PowerLine laser can be operated in extreme environments ranging from -20°C to +55°C. The laser beam can be modulated by an external signal through a DB-9 connector on the back panel and all models can operate in either CW or external modulation mode. The laser is protected against over-voltage, reverse polarity of the power supply, over-temperature, and ESD.
|
|
Features:
- Uncooled operation at 1310 nm
- MSA compliant XMD (10 Gbit/s Miniature Device)
- Field-proven high reliability
Applications:
- OC-48 and STM-16 (2.5 Gbit/s), OC-192 and STM-64 (10Gbit/s) trans-mission systems
- Long haul and Metropolitan DWDM systems
- Small form Transponders and Transceivers
|
|
Pulse Laser Modules
m-u-t's pulse laser modules are based on IR-laser diodes from 805 nm to 1550 nm. All of them have outstanding quality parameters and a power management that ensure a long life time of the laser diode and a high output at the same time.
Characteristics
- Compact design
- Rugged construction
- Low power consumption
- Overload protection
- Monitor output
- Short rise and fall times
- Low EMI
- Integrated overload protection
|
|
|
|
|
|
Focusable Diode Laser Modules
These 635nm/670nm/830nm diode laser modules have adjustable focus with elliptical, circular or line generator beams.
Focusable diode laser modules combine the technology of high-quality diode lasers with superior optics, sophisticated electronics and rugged alignment packaging. These modules can also be used in many applications to reduce the requirements for external optics. The result is an overall system that is smaller, simpler and less costly.
The adjustable focus is a great benefit for many applications. For machine vision, particle measurements and inspection-and their inherent need for direct measurements-the beam can be focused at a distance for the smallest spot size to optimize the system resolution. For fiber launch the adjustable beam can also optimize the focus spot position to achieve the ideal coupling efficiency. For instrumentation applications with multiple laser sources, the adjustable focus can match the red laser beam properties to another laser to simplify integration requirements.
The front knob allows for easy adjustment. During adjustment the optics do not rotate and focusing action is even and uniform while beam alignment is maintained.1 A locking ring is used to secure the focus in any position. Use the VLM2 mount [part no. 0221-437- 00] for convenient heat sinking and mounting with adjustable alignment. For lasers without a connector, order plug no. 1057734.
Key Features
- Focusable VLM2 style package
- High visibility 635 nm, 670 nm and 830 nm
- Adjustable divergence and focus
- Circular, elliptical, line or cross-hair beams
|
|
Description
Fiber coupled array laser diode module available with fiber bundle diameters of 1100, 800µm and powers up to 60W. Standard configurations at 808,nm, 940 and 980 nm are available for medical, pumping solid state lasers, defense and direct-diode applications.
Features
* 808、940、980nm
* High power fiber coupled output (30W/Bar)
* Obtain the higher output power by assembling many liner arrays (60W/2Bars)
* Standard fiber connector (SMA905）
* Center Wavelength: 808nm、940nm、980nm
* Fiber N.A.: 0.12NA/0.22NA
* Fiber Diameter: 1100µm/800µm
Applications
* Pumping solid state lasers
* Medical
* Material processing
|
|
| ... products without technical information |
| |
|
|
