|
|
|
|
|
|
“Sandwich Insulated Panels”
The Cannon Group supplies the manufacturer of sandwich insulated panels with a wide range of proven, reliable, economically and technologically advanced solutions based on discontinuous and continuous methods.
Cannon continuous laminator are the best solution for mass production: sandwich insulated panels can be produced with a maximum thickness of 250 mm and either flexible (paper, cardboard and felt, centesimal aluminium sheet, etc.) or rigid facing (metal sheet, GRP, etc.) and using different types of insulating materials: polyurethanes, PIR, phenolic resins, mineral wools.
Discontinuous processes are preferred for small orders, customized shapes, very thick panels and when it is also necessary to include moulding frames and camlock fixings in the foams. In this field, Cannon has consolidated twenty years of technological partnership with Manni Presse - manufacturer of hydraulic presses -, offering complete packages for open-mould and close-mould foaming processes:
· Book-Opening Presses
· Single Multi-Daylight Presses
· Multi-Daylight Presses
· Tilting Systems
|
|
|
|
|
|
Panels
The application of expanded polyurethane foam has definitively marked a turning point in the industrial and building insulation fields, imposing its technologic validity. It is mainly used for the production of pre-fabricated panels in both discontinuous and continuous process.
Discontinuous Process
This process is adopted to produce panels of different thickness and dimensions. For this production presses able to produce panels up to 14m long and 200mm thickness are being used.
Panels width varies from 0.5m for doors up to 2.50m for refrigerant container.
Both rigid and/or flexible substrata are used, with smooth or grooved profiles according to individual customer's requirements.
Production processes:
- manual side injection system with closed press
- LANCIA automatic injection system with closed press
- automatic injection system with open pour technique
Continuous Process
This process allows a large scale production of different type of panels with flexible or rigid substrata. For industrial production, it is certainly more convenient for both the quality and quantity aspects over the discontinuous process.
The most current foaming systems using c-pentane as an alternative blowing agent are provided with specially designed safety systems to avoid any possible explosion danger.
Production processes:
- PU distribution traverse
- heated pouring platen with view for the suction plant
- double belt conveyor
- high pressure 4 component foaming machine
- metal sheet panels production plant
|
|
|
It is to produce E.P.S sandwich panel for wall, roof which is used for warehouse, factory, fabricated building. The feature of this panel is able to be easy, fast construction.
|
|
This machine line is certified for Excellent Korea Technology by Korea
Industrial Technology Association. The feature are new laminating system (Press by rubber rollers) and mineral wool board feeding unit (Turn over the lamellar way of mineral wool from horizontal to vertical) to get make adhesive strength between mineral wool and coil inside stronger. The feature of this mineral wool panel is excellent adiabatic efficiency, non-flammability, free from poison gas. Furthermore, fiber lamellar of mineral wool absorbs noise efficiently.
|
|
It consists of un-coiler, pre heating unit, metering & foaming unit, double belt conveyor, stacker, packing system, electric control system. The feature are the high productivity through save of labor & raw material and the high quality through the accurate control of metering Polyurethane bond, Furthermore, it is available to adjust width of panel in convenience and to produce special profiles which is not available for the other insulated sandwich panel lines, so that customer¡¯s satisfaction will be maximized.
Excellent adiabatic efficiency.
In case of PIR, fire proof, durability against constriction & expansion.
Light, but excellent strength, so easy construction and self-supporting structure are available.
Excellent resistance to organic solvent.
Excellent strength of adhesive part to metal sheet and water proof because Polyurethane as insulation material is adhesive itself.
|
|
Film and Sheet Calenders
Laboratory calenders are used in the development of continuous processes.
They are suitable for the production of film and sheet of different layer thicknesses made from a wide range of polymer materials such as PVC, polyolefins, PU and many others.
Calenders in L, F, I or Z configuration with roll diameters of 168 mm, 250 mm and 350 mm are available.
|
|
TF: automatic cutters for custom-sized spools of PS film, thickness range: min 0.15 max.0.3 mm.
Final sheet size: min 400x 400, max 1000x1500 mm.
A V-shaped corner-cutting system is available on request.
The cutter is electronically controlled from a panel with auto, single, manual and double cycles, the latter indispensable to obtain lenghts of more than 800 mm
|
|
|
|
|
|
Calenders for laminated PVC
RODOLFO COMERIO designs and manufactures calendering lines for calendered PVC lamination to various supporting materials, where the calender is the main machine in the line. The rolls, 2 or 3, inclined "I" configuration, represent the heart of the machine ; for this reason, based upon the output to be achieved, a design team offers the max possible support to the Customer for the selection of diameter, width, material, technical features of the rolls. RODOLFO COMERIO calenders, furthermore, can be enriched by the most advanced automatic control and adjustment systems for thickness and profile of the film, by means of rolls shifting, roll-bending, cross-axis and preloading. These mechanisms, furthermore, can be integrated with electronics, in order to guarantee calendering process control by gathering and automatically adjusting all production parameters.
The special arrangement of the rolls permits then to apply a wide range of accessory devices such as, for example, the laminating group in calender and embossing group provided with a device to quickly change the engraved and rubber roll.
|
|
| ... products without technical information |
| |
By using the high-frequency welding process, Thimonnier has developed a line of sealing presses to assemble PVC panels which are used in the manufacture of the following items:
swimming pool liners,
above-ground swimming pools,
swimming pool covers,
truck and train tarps,
industrial tarps,
inflatable structures,
taut structures,
shelters,
tents, canopies,
solar protection,
awnings...
The machines may be rail-mounted for performing large welds with programmable travel. Manual and semi-manual solutions are also available.
|
|
|
|
|
|
Hot plate welding is beneficial to manufacturers seeking to join thermoplastic parts where both high-strength and hermetic seals are required, or where parts have complex geometries, such as irregular shape, or curved or internal walls. Several models of hot plate welders are available to accommodate parts up to 72" x 24" in size. Models are available with horizontal or vertical plates. This process is often employed to assemble batteries, fluid reservoirs, lighters, or other challenging plastics joining applications where cost-effective methods and strong seals are crucial.
HH Series Horizontal Hot Plate Welders
Branson's Model HH-15 hot plate welder (at right) combines versatility in a small footprint. The distinctive feature of this welder is its horizontal platen, which enables it to process parts that are not adaptable to standard vertical hot plate welders.
Branson's HH-Series horizontal hot plate welders are complete assembly systems designed to weld parts up to 24" by 72" (610 by 1829 mm), or multiple smaller parts. (Note: the HH24S platen size is 24" by 19"/610 x 483 mm.)
Branson's HV-15 vertical hot plate welder is designed to weld parts up to 15" by 12" (375 by 300 mm), or multiple smaller parts.
Branson's HV-15S Hot Plate Welder is a complete plastics assembly system using a vertical heat platen, coupled with servo-driven holding fixtures, giving the user greater control over weld results than is possible with conventional mechanical stops.
|
|
The ideal assembly solution for medium, contoured, or complex thermoplastic parts. Designed for versatility and easy tooling changeover to accommodate a variety of parts. Typical applications include fuel tanks, reservoirs, taillight lenses, and vent ducts. The welder easily achieves hermetic seals, and finished part weld strength approaches that of the virgin material.
HHB1223P Horizontal Hot Plate Welder
Features
All-pneumatic operation
Unique Rack System coordinates tool platen motion
Single power air cylinder for reduced machine complexity
Two temperature zones standard - Field upgradeable to four zones
Touch screen interface with all digital timing
Controls mounted on space saving pendant arm
Fully adjustable hot plate carrier
Fully enclosed cabinet with exhaust fans
Interior work light
Separate pressure conrols for melt and seal
Vacuum part retention system
Specifications
Maximum heated platen size: 13" x 24" (330 x 610 mm)*
Maximum clamp force 1250 lbs. (5560N)
|
|
|
Hot Plate machines with either contact or non contact technology and Infrared with its suitability for all types of profiled component weld faces.
|
|
A1
AUTOMATIC SINGLE HEAD WELDING MACHINE
Automatic single head welding machine LISI A1 with variable angle from 30° to 180°. Complete with frame support and head protection. Register seam limiting device from 2 to 0,2 mm. Removable heated cutters with automatic regulation of the temperature by digital thermoregulator. Possibility to modificate the material burn-out from 5 to 6 mm by the simply replacement of the positioner. High safety low pressure clampings controlled by a pressure switch. Automatic control of the welding plate temperature by a digital thermoregulator and automatic control of the fusion time by single timers.
|
|
Simple machine operation in the hotplate process goes hand-in-hand with the highest quality and economy requirements. A particular strength of the process is in the joining of more than 2 components (our record: 34 parts for one fuel tank).
* Hot Plate welding machines with contact heating and non-contact heating by means of infrared and gas-convection.
* Complete automated welding lines including parts management by feeding systems, handling solutions.
* Machine concepts in all variations, e.g. rotary table or linear transfer design.
* Robots can be integrated depending on application.
|
|
Single head welding machine SM-1 :
Automatic welding machine without heated Surface knives for Weld seam restriction 0,8 mm.
Length clamping unit guiding case, therefore to reach welding tolerances.
Quick and easy possibility of change to Angles 30° until 180°.
Easy changing of the welding foil Quick clamping ledge.
Easy cleaning of the welding mirror inService position.
Safety clamping cylinder with 2-step pneumaticSystem.
Height of profile max: 200mm
Width of profile max: 215mm on 90° welding.
|
|
| ... products without technical information |
| |
|
|
|
|
LINAK perfects movement in tracking systems
For solar panel tracking systems, LINAK offers several strong electric linear actuator solutions depending on your demand for force, stroke, length, and more.
For solar trackers LINAK has several solutions, but we have two main products, which we would like to recommend to you:
LA36 - Ideal Actuator for Solar Tracking systems
LA35 - Another Actuator for Solar Tracking systems
All suitable actuators for Solar Tracking systems
LA36 actuator
LA35 actuator
LA12 actuator
LA30 actuator
LA31 actuator
With LINAK you get
A specialist in electric linear actuator movement. More than 25 years of experience in the industry segment
Sales and service all over Europe, the Americas, Asia and Australia
A competent sparring partner, with great application and product know-how
A high degree of flexibility: small quantities, customised solutions
A broad product range for all demands
Non-corrosive housings and tubes
A long product life due to a robust construction
A low weight
Low current consumption solutions
Exact positioning
High IP rating 66 and 69K
|
|
The new actuator series for solar photovoltaic systems
With the newly developed Aton 1, 2 and 3 linear actuators, elero Linearantriebstechnik offers reliable drive solutions for users of solar photovoltaic systems.
User advantages
- Extremely high statistic loads compared to required dynamic loads
- Corrosion resistance against environmental influences over long periods
- Very high reliability
- Modular system, flexible integration into existing and new systems
- Electronic limit switches, adjustable throughout the whole stroke
- Integrated overload protection
- Maintenance-free throughout the whole service life
Main features
- Statistic loads up to 60,000 N
- Optional voltages:
- 24 V DC
- 230 V AC
- 400 V 3AC
- Limit switch version:
- reed sensors
- electronic, programmable limit switches
- Integrated stroke measurement systems are possible
- Electronic overload protection
- Internal reference sensors
- Self locking
|
|
Venture has a variety of actuators both motorized or manual suitable for Solar Dish or Solar Array applications. These are available as Acme Screw or Ball Screw type actuators in various volages and mounting configurations as noted below.
Standard strokes 4, 8, 12, 18, 24, 32, 36, 40 and 52 inches (custom lengths available)
30% duty cycle motor rating
Optional features include;
Clutch
Limit switches
Reed, Hall Effect, Potentiometer and other sensor options
3000 lb static capacity / up to 1500 lb dynamic load
Lifetime lubrication
Designed for outdoor use
Compression or tension loads
Trunnion, Clevis, or Tube clamp mounting
High strength steel tube assembly with all-steel load support members
Long Life Acme or Ball Screw
12VDC, 24VDC, 36VDC, 90VDC, or 120VDC for rectified 120VAC Gearbox Designs
|
|
SEA linear actuators series is designed for elevation tracking in photovoltaic panels installation with surface from 50 to 300 square meter.
3 sizes available, all self-locking.
Dynamic load capacity from 10 to 100 kN
Linear speeds from 1 mm/s up to 7 mm/s
Stroke lengths up to 1.500 mm
They all have self enclosed limit switches and positioning control via incremental bi-directional encoder. Available with either AC or DC motors.
|
|
LAM1 linear actuator
Features :
24/12V DC motor
Maximum push load up to 600kg,
Pull load up to 400kg
Maximum stroke up to 500mm
Low noise, smooth speed
Built-in limit switchesifactory pre-setj
10% duty cycle (10 minutes)
Ambient temperature:-26C-+65C
Protective class: IP52
Accessories: potentiometers, hall sensor,
Over-heat protection
|
|
|
Corrugated Mesh and Steel Mesh are particularly suitable for guards, enclosures and partitioning in conjunction with Clamp Profiles.
|
|
High speeds, quick machining cycles, cooling water and chips: Machine tools represent a dangerous environment for people. This is why all machine tools are contained in nearly “impenetrable” housings.
These help reduce or eliminate the hazards for the persons who work with them. With the KABELSCHLEPP PROTECT-PANEL system, we offer you optimized protection for a particularly attractive price.
|
|
In industry, it is advisable to make safe production zones described as dangerous.
AE&T provides the protection of safety zones using robust latticed panels standard and adjusted then with the good dimension, by panels to measure.
Doors sliding hinges or protected by locking mechanisms or n-key rollovers associated with relays with safety supplement the unit.
AE&T offers a wide range of components of safety for these latticed guards:
- switches of safety to pins, levers or magnetic for the machines without inertia
- n-key rollovers with key or by electromagnet for the machines with inertia
- relay of safety category 2,3 or 4 for the monitoring of the emergency stops, the n-key rollover and locking mechanisms.
Latticed guards AE&T, equipped with components of safety are very easy to install and allow to delimit all types of danger zones in periphery of the machines presenting a body risk for the workers: cells of robotization, palletizers, machines of cutting or folding, conveyers...
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
