|
|
Wire Wound chip inductors
case size: 0603 to 1210
application signal and power line
Low Rdc and Low profile types
|
|
small form factor
3 x 3 mm to 10 x 10mm
low profile
superior in drop test
up to 10A
|
|
Inductors
Bourns products include surface-mount chip inductors, power chokes, chip beads, chip bead arrays, as well as radial-leaded and axial-leaded inductors. These components are used in computer, communication, instrumentation, industrial, and medical applications
|
|
|
ATC's family of RF surface mount inductor components is intended to complement its high frequency ultra low ESR capacitor products. The WL Series wire wound chip inductors have been designed to provide excellent performance at competitive prices. The WL Series is especially attractive for all 800 MHz to 3.4 GHz wireless applications where cost and performance are major factors. These applications include but are not limited to: cellular base stations, broadband wireless services, point-to-point and point-to-multipoint radio as well as other RF and microwave telecommunications systems.
|
|
Adding Value with Every Winding
Just about every coil used for induction heating is unique. That's because each inductor must be precisely adjusted and optimized for its intended application.
This doesn’t happen overnight. It requires knowledge obtained from years of experience in induction heating, which HÜTTINGER has. For decades our inductor designs have ensured the best process results for our customers worldwide.
|
|
Smoothing Chokes and Reactors.
Traction, Marine or Industrial Application
High Current and intercooled design.
Iron or air core.
Indoor or outdoor mounting.
|
|
* SMD-Power inductors WE-PD2
* SMD- Shielded Power Inductor WE-PD3
* Power Multilayer Inductors WE-PMI
* SMD- Power Inductors WE-PD4
* Leaded toroidal line chokes WE-FI
* SMD Flat Wire Inductors WE-HC High Current
* Storage/ leaded filter chokes with housing WE-GI
* SMD High Current Inductor WE-HCB
* Toroidal Line Inductors WE-SI
* SMD-Flat Wire Inductor WE-HCA High Current
* SMD-Shielded Power Transformers (SEPIC) WE-DD
* High Current Inductor WE-HCFT
* Shielded Tiny Power Inductor WE-TPC - Extremely flat
* SMD High Current Inductor WE-HCM
* SMD-Shielded Power Inductors WE-PD
* SMD-Flat Wire Ferrite Inductor WE-HCF HIGH CURRENT
|
|
* Radial leaded wire wound inductor WE-TI
* SMD-Multilayer-Inductor WE-MI
* Leaded line chokes WE-ZB
* SMD Wire Wound Inductor WE-GF
* Rodcore Inductors WE-SD
* SMD RF Inductor WE-LQ
* SMD-Rodcore Inductors WE-SDP
* SMD-Wire Wound Inductor WE-ASI
|
|
Inductors
Bourns products include surface-mount chip inductors, power chokes, chip beads, chip bead arrays, as well as radial-leaded and axial-leaded inductors. These components are used in computer, communication, instrumentation, industrial, and medical applications.
|
|
THIN FILM INDUCTORS KL73 - Thin Film Chip Inductors
Features:
- KOA original thin-film multi-layer technology realizes low DC resistance and high Q.
- No circuit adjustment is possible due to narrow tolerance ±2%.
- High self resonant frequency and excellent high frequency characteristics.
- Applicable to high density mounting with thin and miniature type (each type of 0603~3216 sizes is lined up).
- Direction marking. (All size)
- Inductance value marking. (1J, 2A, 2B)
- Suitable for both reflow and flow solderings.
- Products with lead free termination meet EU-RoHS requirements.
Applications:
High frequency circuits in terminal and base station of mobile wireless equipment such as Cellulars and Pagers.
|
|
Ferrite Chip Beads
wide range of various impedance characteristics
case size: 0201 to 1812
|
|
AIR CORE INDUCTORS KQ - Air-Core Chip Inductors
Features:
- Small chip inductors with air-core and wire wound for frequency equipment.
- High Q and high self-resonant frequency with stable temp. characteristic.
- Precision type (±2%) is available.
- Excellent mechanical strength, mountability, solderability and high reliability in withstanding environment.
- Suitable for high-frequency circuits such as telecommunication equipment and mobile phones.
- Low DC resistance and high allowable DC current.
- Suitable for reflow soldering.
- Products meet EU-RoHS requirements.
Applications:
For Cellulars, Pagers and Mobile Communication Equipment.
|
|
MELF (CARBON FILM) RD41 - MELF Type Fixed Carbon Film Resistors
Features:
- RD41 is SMD carbon film resistors.
- Free direction for mounting due to cylindrical design.
- The electrode strength is firm.
- The noise characteristic is excellent.
- Suitable for reflow, flow and iron solderings.
- Products with lead free termination meet EU-RoHS requirements.
Reference Standards:
IEC 60115-8
JIS C 5201-8
EIAJ RC-2131A
|
|
Common mode choke
Application :
Power electronic converters
Gamme :
Inductance value from 100uH up to 10mH
Current range from 15A up to 200A
|
|
|
Bobbins for transformer cores are also available in wide range consisting of EE, EI, ETD, ET, EP, RM , UU and SMD type s in horizontal and vertical.
|
|
|
Radius Power offers standard and custom transformers, inductors and chokes for a broad range of applications such as common mode, differential mode, high frequency SMPS (EE, EI, PQ, etc), laminations, toroidal, air core and CT. Most products are UL, CSA and CE approved (UL1585, UL506, EN60950, etc.) with Class B, F and H insulation systems.
|
|
|
Radius Power offers standard and custom transformers, inductors and chokes for a broad range of applications such as common mode, differential mode, high frequency SMPS (EE, EI, PQ, etc), laminations, toroidal, air core and CT. Most products are UL, CSA and CE approved (UL1585, UL506, EN60950, etc.) with Class B, F and H insulation systems.
|
|
| ... products without technical information |
| |
|
|
