|
|
" RT Machines by P.E. "
Thanks to 30 years of activity performed by the Shareholders and the Technical consultants and to the experience achieved on site with the start-up of
> 5 Plants
> 14 Production Lines
of Rubber Thread Plants, P.E. can supply the best "Machines for Rubber Thread" such as:
> Spooling Machine
> Packing Machine
> Splitting Machine
> Talcum Machine
Besides the supply of "Extrusion Lines" & "Turn-Key Plants" the above "RT Machines by P.E." can work
> all rubber thread counts from 20 up to 110
> all rubber thread ribbons
The Spooling produces Rubber Thread on Spools, starting from the ribbons manufactured by the plants. Thanks to the "Active System" to regulate the manufacturing parameters and equipped with the electronic control / manufacturing receipts data base, the "Spooling by P.E." are flexible, highly performant and have an high productivity.
The "Packing by P.E." boxes the rubber thread ribbons in carton boxes of chosen dimension and weight.
When combined with the "Splitting by P.E.", you have the "Integrated Splitting by P.E." that all at once allows to:
- produce Special Rubber Thread Ribbons, finished ribbons with a number of threads between 2 and 40 threads per ribbon
- pack these Special Ribbons
These "RT Machines by P.E." can be used by
> the Rubber Thread Industry & in the Rubber Thread Plants
> the Industry that "works & uses" Rubber Thread, each time you need:
- Rubber Thread on Spools
- Special Rubber Thread Ribbons
> the Final Rubber Thread Consuming Markets, each time a Customer needs:
- Rubber Thread on Spools
- Rubber Thread Ribbons with a number of threads between 2 & 40 threads |
|
" RT Plant by P.E. "
Thanks to more than 30 years of activity performed by its Shareholders / Technical Consultants and to the experience matured with the design, the construction & the start-up of
> 5 Plants
> 14 Production Lines
of "Rubber Thread Production Plant" from Natural Latex (successfully supplied in Thailand Malaysia Indonesia & India) P.E. can today offer the result of his experience & Know-How.
P.E. applyes a continuous process to upgrade the Technology, the Process, the Machines, the Production Receipts, the Plant Utilities, the Auxiliary Equipment & the Know-How, all of which are the basis of any "RT Plant by P.E."
Our Plants are complete Process Plants to produce Round Section RT usually classified by the markets as
- High Quality Rubber Thread
- H.R.L.R.T. - Heat Resistant Latex Rubber Thread
The final products of our plants are RT Ribbons that
- can be produced in all the requested counts from 20 to 100
- satisfy the final customers demand
- can be used in different applications (from belts to .. alimentary nettings)
This flexibility of a "RT Plant by P.E." is due to its "Performance Synergy" originating from the Technology, the Solutions, the Process & the Know-How used, so far so that the new available solutions give
- high production for each count
- minimum Acetic Acid consumption
- huge flexibility in operation
- minimum plant set-up time when product change is needed
More advantages rises from the "Control System by Process" that allows to
- control all the Process & Production parameters
- have the Extrusion Lines Automation
- have the Tele-Assistance
- continuously monitor the Plant |
|
The principal machine of this production line adopts speed reducer of hard tooth surface, DC electric machine, Euro DC speed regulator, screen changer of hydraulic system, distributor, moulds of clothes-rack mode, three-roller calendaring machine and tractor of high speed and frequency control, roller let-off of double-position mode and deviation rectifying device. It is capable of producing mono-layer or multi-layer PP/PE co-extrusion plates/sheets. Covering fabric braided and film on the double folds can reinforce the toughness and tensile strength. Should 50% masterbach were added to central layer of this production line, its products are applicable to the external packaging especially for special iron plate, steel plate, etc.
¡¡ Valid width of products: ¡Ü3000mm
¡¡ Thickness of products: 0.3mm-6mm |
|
PRODUCT SPECIFICATIONS:
The tried and tested latex glove with a smooth inside
Very skin-friendly and comfortable due to smooth, halogenated inside
Palms and fingers with a rough profile - excellent tactile properties and very good grip
Halogenated surface for better general chemical resistance than in nonhalogenated gloves
Signal colour red - easy identification, even in poor lighting conditions
Tested and certified in accordance with 89/109/EEC - suitable for contact with food
APPLICATIONS:
Cleaning, food industry, gastronomy, lab and pharmaceuticals, industry (service, packaging,...), agriculture and household |
|
| ... products without technical information |
| |
RERS
Rubber Protector Caps made from Neoprene
Protects against dust, chemical substances and aggressive environment. Resistant to oil, grease, saltwater, chemical components and other substances. Temperature range from -20º till +120º Celsius or -4º till +248º Fahrenheit.
Can be completely filled with grease. Mounted easily with Seeger retainning pliers. |
|
| ... products without technical information |
| |
SERPENT C 80
Construction
Diagonal layers of cotton duck and rubber, coated with graphite grease. Very good cross-expansion requiring only low gland pressure.
Size Range: Square section 5mm, 6.5, 8mm, 9.5mm in 2 x 3 metre coils. 11mm to 25mm in 1 x 3 metre coils.
Also available as split rings.
Temperature: 1200°C
Pressure: 7 Mpa (70 bar)
Speed: 1m/s
pH: 5 - 11
Services: Hot and cold water, low pressure steam, ammonia and brine.
Applications:
Reciprocating and static. Reciprocating compressors, Piston cooling elbow glands. Drying cylinder expansion glands. Refrigeration machinery. |
|
DYNAMIC SEALING
External or Internal Interactive Sealing Solutions
Unlike static seals, APM's custom molded dynamic elastomeric seals are designed to transmit mechanical energy, either internally or externally applied, depending on your application and environmental challenges. They flex and move without degradation or sealing compromise. Please submit your design requirements and we'll rapidly respond with a cost-effective solution and quote. |
|
| ... products without technical information |
| |
Gravity Separator 3HP
Wet Separator VS3HP
Water Vibrator 5HP
Sieve Vibrator 5HP
Agitator 2HP, SUS
Water Tank Separator |
|
Plastic extruding granulation unit
Made up of Single Screw Extruder or Double Conical Screw Extruder and their corresponding auxiliary devices.
Used to produce different uses plastic granules such as PVC and PE and so on.
The manufacturing plastic pellets are even, dense and beautiful.
The molding and blend effect of main machine is uniform in this unit, and structure is tight.
The wind sending & gathering and vibration separate type cool system of assistance
SLZ compulsion feed-in type conical screw recovery granulation unit
This unit is fit for scrap film and leftover material granulating of Plastic Blow Film Factory.
Fit for different old and useless plastic material recovery.
Fit for PE, EVA and PVC use less film block, PE, PVC, ABS and PP material confecting and granulating.
It is a distinguishing feature that the unit be able to granulate powder material, the granule produced may compare with the fresh resin granule.
This unit feature well-developed and tight structure design, low energy consuming and high yield, and is the ideal device of old plastic material recovery. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
... see all the products in the category
Magnets
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
- Nitrile Rubber Balls:
Seamless Rubber Balls Provide Excellent Sealing in Flow Control Applications such as Pumps and Check- Valves. Excellent oil resistance.
Molded Only Buna N Rubber Balls (with molding seams) are available for non-critical applications.
- Viton Rubber Balls:
Seamless Viton Rubber Balls Provide Excellent Sealing in Flow Control Applications such as Pumps and Check- Valves. Viton Balls are Suitable for High Temperature and Harsh Chemical Environments.
- Silicone Rubber Balls:
Seamless and Molded-Only Silicone Rubber Balls Provide Excellent Performance in High Temperature Medical and Food Applications.
- Pure Gum Rubber Balls:
Seamless and Molded-Only Pure Gum Rubber Balls Provide Excellent Shock Absorption, Abrasion Resistance and Sealing.
- Neoprene Rubber Balls:
Seamless Neoprene (CR) Chloroprene Rubber Balls Provide Excellent Performance in General Industrial Applications. Molded Only Neoprene Rubber Balls are available.
- EPDM Rubber Balls:
Seamless and Molded-Only EPDM Rubber Balls Provide Excellent Performance in Water and Environmental Applications. |
|
the rubber vulcanisation technique is largely used in:
automotive industry
household electrical devices
treatment of rubber components such as tires, shelves, joint, gaskets, etc.
coated rubber rolls
foot water industry
rubber special application |
|
Bellows
Arnold bellows offer safe protection for both people and machinery. These are the products to soke your problems - in which material, stability and shape can be individually customised.
If the bellows will be subjected to high mechanical stress and strain, the telescopic covers provide safe protection even at high processing speeds. Due to our patented mounting system, the telescopic covers will either be flexibly mounted or connected with the bellows without the use of adhesive materials under consistent counter pressure, if required and can also be coolant-compatible, if this is desired. |
|
| The SPA 500 analysis system was developed particularly for the measurement of the oxygen content in steam-heated autolavas during the vulcanization process by rubber products by peroxide (H2O2). The duration of the flushing of the autoclaves with water vapor can be reduced by the accurate measurement of the CO2 content. This leads to a clear cost saving. The determination of the optimal starting point and the monitoring of the CO2 content during the entire curing process lead in addition to an improvement of the product quality. The analyzer is both in a stationary execution (SPA500S) and in a portable execution (SPA 500P) available. |
|
The self-adhesive technique provides faborable solutions for surfaces requiring protection while manufacturing, storing and transporting products made of glass, metal
and plastic materials.
VITO distance/shipping pads serve as antiskid and anti-scratch spacing devices and simultaneously, as shock absorbers. Therefore, they essentially contribute to the reduction of costs as well as to the minimization of transport damage.
The specific properties relating to applicability, inherent in the base materials - cork, self-adherent foam and cellular rubber - permit to effect extensive utilization in many fields;
they are particularly suitable for the necessary storage and transport of insulating glass or ready-glazed window and door elements consisting of metal and plastic materials.
VITO distance/shipping pads manufactured and achieved in a rational way and adapted to requirements of their processing, are offered in view of the industrial utilization.
VITOCORK "SOF" is also available as cork tape and bobbin/spool/coil conforming to requirements of the automatic processing.
Adequate choice of the distance pad type and of the thickness can enable to meet different conditions and demands (from 2 mm thickness to 6 mm). Please contact us.
|
|
|