|
|
Line of assembly of limp of cellular culture
This line of assembly is articulated around an intelligent transport system made up of shuttles on monorail in closed loop. The prints of the shuttles receive the products to be assembled. The shuttles stop at each station described hereafter, where the various stages of assembly are carried out:
1. Deposit bases by a robot
2. Treatment of the bottom of the base
3. Deposit lids on the bases
4. Welding ultrasound of the lid on its basis
5. Leak test of the bottles
6. Clipsage of the cap on the neck of the bottle
7. Ejection of the bad bottles
8. Plugging of the graduation
9. Transfer of the bottles on a conveyer of exit
|
|
MAP Automatic marking, punching, shearing line for metal profiles - flat bars - angle sections - I - U - H- UPAF, etc.
MAP range: MAP 160 MAP 300 MAP 450
Universal, powerful and high-speed machines
MAP 160, 300 and 450 machines are flexible marking, punching, shearing systems for metal profiles, etc., designed to switch easily from angle sections to flat bars, or to I - U - H profiles.
The modular design makes it possible to adjust equipment capacities to user requirements at the lowest cost.
Access to tools, punches and dies, is easy and makes it possible to switch production quickly.
The MAP series punching-shearing lines are the only machines on the market performing in a single pass all operations normally carried out on beams:
- easy programming
- fast and precise
- flange and web punching in a single pass
- easy and quick machine adjustment.
These machines are especially suited to steel structure construction.
|
|
|
C2PL range offers a full CNC automatic line for punching and shearing angles for an excellent price quality balance. It is a Geka exclusive solution being the first step into the CNC lines withy an excellent value for money.
|
|
CNC complete line automatic solution for punching, marking and shearing of medium and large size angles. Thanks to its great design and excellent finishing, ALPS will allow you to produce a great range of pieces at a low cost at with an excellent quality. The great flexibility of the ALPS allows processing plates and even plates.
Thanks to the available options that Geka offers, ALPS line can be customized for ever customer depending on its specific needs.
|
|
|
|
|
|
TECHNICAL FEATURES AND STANDARD EQUIPMENT:
The APS is the perfect line to have a quick punching and cutting activities for profiles from 30x30 to 160x160x19 mm equipped by:
- A strong main body welded.
- Feeding system equipped by rollers driven by Brushless motor
- Separate Encoder for the feeding lenght management
- N. 2 punching units of 80 Tons, with axes driven.
- N. 1 cutting unit for profiles
- With standard equipment you can fit punches and dies from 5 mm up to 32 mm.
- Feeding units 6 meters
- CNC system for axes X, Y e Z management and punching cutting activities
- Pieces counter
- Set up for a different length, holes numbers and coordinates
- Programs archive
- Display Diagnostic System
- Hydraulic control unit complete with oil.
- CE certificate of conformity
SOFTWARE:
The APS is equipped with the latest generation of software. The program can work with the pieces saved in a data base and also enables designs of several pieces in one, nesting different parts in a sequence optimising the smallest amount of wasted material.
A DXF or DSTV converter is also available as option having the possibility to import and convert these files.
|
|
|
|
|
|
Line printers (or impact printers) continue to be the unchallenged leader in reliability, while delivering the lowest cost per page printing and widest range of forms flexibility.
P7000 Printers
Printronix introduces the 6th generation P7000 line printer family. Advancing its industry leading web-enabled remote management capabilities, and coupling a host of reliability and usability enhancements, the P7000 printer represents the best line printer ever made and the ideal solution for high volume low cost printing of mission critical reports, forms and labels.
P7000 Ultra Capacity ribbon - up to 300% longer life with darker, sharper print
Integrated Print Management - total visibility and control of image quality and consumables
High speed - up to 2000 LPM
Low cost of operation - typically 10X lower than laser or serial matrix
Forms flexibility - straight paper path and heavy duty pulling power
Rugged design holds up to abuse and harsh environments
100% duty cycle - designed for relentless printing
Comprehensive bar code support - high quality reliable bar codes in the following symbologies: Code 39, EAN 8/13, UPC A/E, Postnet, Royal Mail, Interleaved 2 of 5, and PDF417
New pedestal or quietized cabinet models
For HP LineJet® users the new P7000 can handle all your printing needs. View our P7000 versus HP LineJet table.
P7000ZT Series
This line printer enables printing single sheets from the first to the last line with no loss of forms.
P7000HD Series
High Definition graphics printer for use in Windows based applications and PDF printing.
|
|
ALFA range is designed for automatically punching, marking and shearing of profiles. Therefore, the final part is obtained in a whole and single process increasing the efficiency and erasing loss of time.
Automatic line CNC controlled for punching, marking and shearing profiles. This solution is ideal for metallic constructors. The bars (flat bars up to 500x400 mm, and angles up to 150x150x15 mm) up to 12 m long are pushed and clamped by a carriage. Material is always guided by lateral roller against line reference.
|
|
|
CNC line to fulfil the punching, marking and shearing of medium sized angles. Fully controlled by CNC, SPS will allow you processing large amount of angles in an easy, efficient and precise way. Thanks to the available options that Geka offers, SPS line can be customized for each customer depending on its specific needs.
|
|
|
|
|
|
VP Marking, punching, drilling and shearing line for angle sections
VP range: VP 150 VP 160 VP 180 VP 200 VP 206 S VP250 - D
VP machines cover all machining operations: marking, punching, drilling and shearing.
The high-pressure system (400 bars) reduces production times and currently makes it possible to attain production rates of more than 1,000 operations per hour. Punching machines incorporate NC backmarking. The number (2 to 6) of punching units and the related power (50 to 93 tons) vary according to the size of the angle sections to work and the number of different diameters in each flange. The single-cut type shear (from 160 to 500 tons) prevents loss of metal and distortion. Blades do not need to be changed.
Highly appreciated by manufacturers of transmission towers and electrical steel towers, the automatic VP marking, punching, drilling, shearing lines for angle sections are controlled by a single operator. Reliable and designed for highest productivity, various types of works may be programmed.
|
|
The Centromatic machines center and edge lenses of 10 to 300 mm in diameter – fast, reliable and precise.
The complementary tool geometry permits processing of complex lens shapes (i.e. not-rotatory symmetric contours as well as not round shapes) without tool change – with two spindles (option) even faster.
The Centromatic grows with your demands, extension is easy, because of the modular construction.
|
|
MAG B : Drilling punching marking and plasma cutting machine for plates
MAG B range: MAG B 320-80, MAG B 320, MAG B 620, MAG B 1225
Efficient, easy to run and flexible machines for plates
Compact line for complete machining (drilling, punching, marking and plasma cutting) of middle and high thick plates in one handling
The purely software-based solution is a new approach in which a processor carries out all automation tasks within a single-processor mode. The PC software is used for processing PLC and NC tasks.
|
|
|
These are the most modern, rapid and flexible CNC lines to punch angles. Their main features are: low-cost; easy installation; automatic feeding; easy programming; flexibility for small/medium size pieces; new productivity concept. Besides the punching and shearing stations, a daisy wheel marking unit and a multifunctions unit, that can be "dressed" with extremely useful optional equipments such as double punching, notching and marking tooling, are also available. Angles are fed by means of a carriage with pincher in order to guarantee precision in positioning and reduced scrap.
|
|
| ... products without technical information |
| |
The TH8080 is a physical layer device for a single wire data link capable of operating in applications where high data rate is not required and a lower data rate can achieve cost reductions in both the physical media components and in the microprocessor which use the network. The TH8080 is designed in accordance to the physical layer definition of the LIN Protocol Specification, Rev. 1.3 and 2.0 and SAE J2602.The IC furthermore can be used in ISO9141 systems.
Because of the very low current consumption of the TH8080 in recessive state it's suitable for ECU applications with hard standby current requirements, whereby no sleep/wake up control from the microprocessor is necessary.
|
|
|
|
|
|
General Description
The LVT16245 and LVTH16245 contain sixteen non-inverting bidirectional buffers with 3-STATE outputs and is intended for bus oriented applications. The device is byte controlled. Each byte has separate control inputs which can be shorted together for full 16-bit operation. The T/R# inputs determine the direction of data flow through the device. The OE# inputs disable both the A and B ports by placing them in a high impedance state.
The LVTH16245 data inputs include bushold, eliminating the need for external pull-up resistors to hold unused inputs.
These non-inverting transceivers are designed for low-voltage (3.3V) VCC applications, but with the capability to provide a TTL interface to a 5V environment. The LVT16245 and LVTH16245 are fabricated with an advanced BiCMOS technology to achieve high speed operation similar to 5V ABT while maintaining low power dissipation.
Features
- Input and output interface capability to systems at 5V VCC
- Bushold data inputs eliminate the need for external pull-up resistors to hold unused inputs (74LVTH16245), also available without bushold feature (74LVT16245).
- Live insertion/extraction permitted
- Power Up/Down high impedance provides glitch-free bus loading
- Outputs source/sink -32 mA/+64 mA
- Functionally compatible with the 74 series 16245
-Latch-up performance exceeds 500 mA
- ESD performance:
*Human-body model >2000V
*Machine model >200V
*Charged-device >1000V
- Also packaged in plastic Fine-Pitch Ball Grid Array (FBGA)
|
|
|
|
|
|
General description :
The Intersil ISL324xE devices are 2.7V to 3.6V powered RS-232 transmitters/receivers which meet ElA/TIA-232 and V.28/V.24 specifications, even at VCC = 3.0V. Additionally, they provide ±15kV ESD protection (IEC61000-4-2 Air Gap and Human Body Model) on transmitter outputs and receiver inputs (RS-232 pins). Targeted applications are POS systems, and notebook and laptop computers where the low operational, and even lower standby, power consumption is critical. Efficient on-chip charge pumps, coupled with manual and automatic power-down functions, reduce the standby supply current to a 0.5µA trickle. Tiny 5mmx5mm Quad Flat No-Lead (QFN) packaging and the use of small, low value capacitors ensure board space savings as well. Data rates greater than 250kbps are guaranteed at worst case load conditions.
ISL324xE are 3 driver, 5 receiver devices that, coupled with the 5x5 QFN package, provide the industry's smallest, lowest power complete serial port. The 5x5 QFN requires 60% less board area than a 28 Ld TSSOP, and is nearly 20% thinner. These devices also include a noninverting always-active receiver for "wake-up" capability.
The ISL3243E features an automatic powerdown function that powers down the on-chip power supply and driver circuits. This occurs when an attached peripheral device is shut off or the RS-232 cable is removed, conserving system power automatically without changes to the hardware or operating system. It powers up again when a valid RS-232 voltage is applied to any receiver input.
|
|
|
We invented the charge-pumped RS-232 transceiver. Today, we are the leader in copper-wire data transfer, at speeds up to 800Mbps. Our product line includes USB, RS-232, RS-485, LVDS, and IrDA transceivers as well as Logic Level Translators, UARTs, and SCSI termination products.
|
|
|
LVDS & CML (Buffers and SerDes) Nationals leading edge LVDS and CML multi-megabit & -gigabit products include signal conditioners, serializers/deserializers (SerDes), drivers/receivers/transceivers, crosspoint switches, muxes, 1:n repeaters, buffers, and much more that drive LVDS, M-LVDS, PCI Express, SATA, SAS, XAUI, 4G FC, DVI/HDMI, and CPRI signals over low-cost cables and long FR4 traces. Serial Digital Interface and Data Transmission.
|
|
|
|
|
|
AMIS-30600: LIN Transceiver
The single-wire transceiver AMIS-30600 is a monolithic IC that works as an interface between the protocol controller and the physical bus.
AMIS-30660: CAN High-Speed Transceiver
This transceiver is the interface between a controller area network (CAN) protocol controller and the physical bus and may be used in both 12V and 24V systems.
AMIS-30663: CAN High-Speed Transceiver with true 3.3V and 5.0V logic level interface
This transceiver is the interface between a controller area network (CAN) protocol controller and the physical bus and may be used in both 12V and 24V systems.
AMIS-40615: LIN Transceiver
The AMIS-40615 is a full-featured local interconnect network (LIN) transceiver designed to interface between a LIN protocol controller and the physical bus.
AMIS-40616: LIN Transceiver
The AMIS-40616 is a full-featured local interconnect network (LIN) transceiver designed to interface between a LIN protocol controller and the physical bus.
AMIS-4168x: Fault Tolerant CAN Transceiver
The AMIS-41682 and AMIS-41683 work as the interface between the CAN protocol controller and the physical wires of the CAN bus.
AMIS-42665: High-Speed Low Power CAN Transceiver
The AMIS-42665 CAN transceiver is the interface between a controller area network (CAN) protocol controller and the physical bus and may be used in both 12V and 24V systems.
AMIS-42700: Dual High-Speed CAN Transceiver
Controller area network (CAN) is a serial communication protocol, which supports distributed real-time control and multiplexing with a high safety level.
|
|
|
The CS8406 is a digital audio transmitter that supports 192 kHz needed for next-generation audio formats such as DVD-Audio. It enables consumer and professional audio products to exchange 192 kHz S/PDIF and AES/EBU audio data. The CS8406 accepts and encodes audio and digital data, which is then multiplexed, encoded and driven onto a cable/optical transmission interface. Its flexible 3-wire serial digital audio input port, on-chip channel status and user bit buffer memories allow block-sized updates without the need for external memory. The CS8406 also includes an on-chip, low-skew, low-impedance differential-line driver that permits transmission over longer cable lengths.
|
|
|
Industry standard single and dual drivers and receivers for RS232 and RS562 are available for power supplies from 1.8V to 5.5V with high ESD protection. DTE or DCE configurations are available in 3.3V or 5V versions.
|
|
|
Texas Instruments (TI) provides complete digital interface solutions. High-performance solutions that empower you to differentiate your products and accelerate their time-to-market. TI has experience in highspeed, mixed-signal circuits, system-on-a-chip integration and advanced product development processes. Our solutions ensure you receive the silicon, support tools, software and technical documents to create and deliver the best products on-time and at competitive prices.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
