|
|
Place the data logger inside the thermal barrier, then send the logger with your product through the oven to record thousands of temperature readings.
Employing the same insulation technology as used in an aircraft’s ‘black box’, Datapaq thermal barriers can withstand the harshest industrial environments. The thermal barriers are constructed from microporous insulation housed in a rugged stainless steel casing. At Datapaq we’ve perfected our thermal barrier technology, optimising the barriers for size and weight, while maintaining our reputation for durability.
|
|
| ... products without technical information |
| |
Data Acquisition and Supervisory Control System
Pages autoconfiguration for gammadue® and/or deltadue® instruments
Data acquisition and monitoring
Process operation
Wide library of drivers
Mimic and pre-formatted pages
Real time and historical trending
Powerful alarm handling
Flexible configurable reporting
Recipe management
Security levels for operator access
Ethernet TCP/IP networking
Data exporting to commonly used databases
|
|
SOFTWARE DESCRIPTION:
In the era of computerization, the user friendliness and the usability of the computer is very common aspect in the industry. Computers are widely used for the majority of the industrial applications. In order to use the benefit and power of the PC, Libratherm offers standard, customized and dedicated computer programs or the software which runs on the window based operating platform in connection with the various Libratherm make temperature and process controllers, programmers and Data loggers to monitor the online process behaviour. Though, various industrial well known SCADA software package also do the job of PC interfacing, we still prefer to offer our own dedicated DAS software for the reason of our ability of customization, low cost and modification of the required hardware to meet the end users applications - when compared to the SCADA package. The various microprocessor based instruments are interfaced with the PC on RS232 serial port or RS485 bus having MODBUS RTU or ASCII protocol.
DATALOG16 software – designed to interface with our DATALOG-16, monitors and displays the process value of all 16 channels – which are updated every 1 second. Facility to view the real time line graph of the process values, where user can select or deselect the channel, can zoom in or zoom out with auto scaling of x or y co-ordinates, the data base is created in back ground which can also be seen in the tabular format with real time and date. The records can
be easily searched by date, time or by the customized and user selectable field. The software can be customized to group the monitoring of single or multiples systems with suitable identifications. |
|
ProfiSignal BASIC offers a complete solution for requirements in measurement data acquisition, analysis and visualization. ProfiSignal BASIC combines professional measurement data analysis with modern control and monitoring functions. Twenty five years experience of meeting client needs has gone into the development of this completely new product.
- BASIC is a complete system for the acquisition and analysis of measurement data which also includes process visualization, control and monitoring functions.
- System configuration is clear and easy to understand.
- Data analysis and process visualization is available in one system.
- Limitless assessment and analysis of measurement data - from millisecond to annual time intervals with just one mouse click.
- Data acquisition takes place using the modular Message hardware.
- Transfer of measurement data and assessment via TCP/IP network.
- Data storage possible on server/PC or independently within field device providing especially secure data logger storage. |
|
Data Acquisition Toolbox 2.11
Acquire and send out data from plug-in data acquisition boards:
Data Acquisition Toolbox provides a complete set of tools for analog input, analog output, and digital I/O from a variety of PC-compatible data acquisition hardware. The toolbox lets you configure your external hardware devices, read data into MATLAB and Simulink for immediate analysis, and send out data.
|
|
controlls up to 50 machines on a PC server
archiving of the production data in a database
recording and evaluation of the machine data
centralized control of the production line
real time monitoring via online-display
reduction of the production costs
reduction of the controlling staff
Analysis Options :
number of bonds, circuit boards and chips per time interval
quality result of the bond connections
downtime analysis
wire deformation graph (source and destination)
efficiency evaluation of the production shifts
time per production unit, average time per production unit, uptime calculation
bond time, average bond time
log book
data export to MS Excel
user defined analyses are possible
|
|
TMM - Test Method Manager
A software that was created for the management of laboratory testing. It is possible to link the software to instruments as electronic balances and thickness gauges and it allows to create customized test methods intending to measure the values of absorption and permeability of plastic films.
It is possible to set the following parameters:
„Ï Number of samplings
„Ï Frequency of samplings and test period
„Ï Type and features of the used fluids
„Ï Evaluation formula
The measured values , the resulting arithmetic average, the standard deviation and the linear regression are visualized in real time both in numbers as in graphics.
The possibility of exporting the data in files.xls allows the maximum flexibility in terms of customization of the representation of the obtained values. |
|
The monitoring systems and telecontrol of the systems are essential elements for the attainment of optimal performances of the modern industrial production.
However, the possibility to approach quickly the historical data of production and the data of instantaneous efficiency, would sure guarantee a total control of the production processes, through more detailed analysis than efficiency, of productivity and performance.
Metoda Automation has resolved this problem with DataView.
DataView is an analysis system and relative reportistica to the acquired data from database relational fed or our systems applications/expires or systems informed to us already present. To characterize and to recognize the problems before, and their causes, allow to realize timely participations of correction and prevention. In this way a better performance of the systems is determined and consequently, a better return of investment (ROI). Dataview for its tipologia and the diversification of the data of the database, is a software constructed ad hoc for the single customer and the relative necessities. The experience than more decennial in within automaton concurs industrial us to supply to the customer the reingegnerizzazione and the treatment of the data traffics, being thus produced an effective instrument for the detailed analysis of the production process.
Main functionalities of DataView
· immediate availability of the sensitive data;
· visualization and search of the data;
· elaboration of tables and diagrams;
· generation of trend and report, on the whose base to execute performance and productivity, efficiency analysis. |
|
| ... products without technical information |
| |
FEATURES:
- Control/Monitor/Alarm via GSM mobile phone, no distance limitation. User can control/monitor/alarm their devices all over the world.
- 8 channels Analog input (4 -20 mA)
- 8 Relay outputs
- 8 Switch inputs, normal open, close alarm
- 8 Analog inputs: system can preset 4 mA and 20 mA input value according the real measuring value and setting display unit. It can read actual measuring data via the SMS (Short Message) requested, such as CH1= 28.0 C. CH2=53.7 %RH, CH3=7.01 pH........CH8= 230.5 ACV.
- Enable or disable Analog input alarm (High alarm, Low alarm) via SMS.
- Enable or disable switch Input alarm (close alarm) via SMS.
- Set relay output On/Off via SMS
- Dot matrix LCD display show Analog input value, Switch input and Relay output status.
- All setting value will be saved into EPROM IC, no loss.
- Mobile telephone can call out all channel measuring value, status of Switch input and Relay output at any time.
- Can default two telephone no., alarm SMS can be sent to two users.
- Build GSM mobile modem (dual band).
- After the SMS command sent by mobile phone, the confirm message will be sent back to the mobile, safe and no loss.
- Intelligent application , innovation, wide range, no limitation |
|
GSM Intercom
The GSM Intercom interface converts any existing intercom call point into a full GSM intercom system
1. Simply connect 3 or 4 wires normally connected to the intercom to this unit to GSM enable it.
2. No more missed callers
3. No giving away to strangers there is no one home when the intercom is not answered.
Caller ID GSM Access Control
1. The Unit will open gate, barriers, doors, mag-locks, barriers and shutters by recognizing the caller ID of the person calling it.
2. 1000 User Memory
Two Alarm in and Two Relay Out
1. Additional relay to control external items such as lights, power , heating, cooling or even the hot-tub.
2. Call into the unit and enter a password to switch the addition on board relay on
3. Connect sensors or an alarm system and be alerted by call or text any problems.
Product Specification.
1. Quad band Module
2. Operating Temp %u2013 25c %u2013 55c
3. Humidity Less than 95% RH
4. Lightning protector 3 -5 W
5. 2 output relay
6. Calls up to 3 numbers outbound
7. Battery backup for up to 8 hours
8. Caller ID for up to 1000 users
9. Programmable via SMS or voice or PC
10. Optional LCD programming
11. Comes with IP 65 enclosure
12. CE Approval |
|
1.Use as the telephone line backup in alarm system - Phone lines can easily be cut off during storms, construction work, accidents,deliberate tampering by intruders. will checks the status of the telecom line in alarm system and in case the telecom line become unavailable, will transmit the alarm using GSM to the alarm receiving center (ARC) or Center Monitoring Station (CMS)
2.Automatically call to 8 pre-program phone numbers while alarming. also will SMS to 8 programmable cell phone number to notify the user that the PSTN line has been cut off or unavailable
3.Programmable Contact ID - has built-in alarm inputs that allow the unit to send additional signals (with user programmable Contact-ID event) to the monitoring station. Supported Protocol: Pager message (DTMF no handshake)
4.Three Remote Controlling Outputs - These open collector outputs (that can sink max 300ma per output) can be turned on and off remotely through a SMS. You can use them to pull to ground your inputs. Remote control will be reachable by sending a SMS with a certain command. For example, switch on lighting, air conditional, or switch off generator, sensor using your mobile phone. |
|
Data Acquisition and Supervisory Control System
Pages autoconfiguration for gammadue® and/or deltadue® instruments
Data acquisition and monitoring
Process operation
Wide library of drivers
Mimic and pre-formatted pages
Real time and historical trending
Powerful alarm handling
Flexible configurable reporting
Recipe management
Security levels for operator access
Ethernet TCP/IP networking
Data exporting to commonly used databases
|
|
controlls up to 50 machines on a PC server
archiving of the production data in a database
recording and evaluation of the machine data
centralized control of the production line
real time monitoring via online-display
reduction of the production costs
reduction of the controlling staff
Analysis Options :
number of bonds, circuit boards and chips per time interval
quality result of the bond connections
downtime analysis
wire deformation graph (source and destination)
efficiency evaluation of the production shifts
time per production unit, average time per production unit, uptime calculation
bond time, average bond time
log book
data export to MS Excel
user defined analyses are possible
|
|
The monitoring systems and telecontrol of the systems are essential elements for the attainment of optimal performances of the modern industrial production.
However, the possibility to approach quickly the historical data of production and the data of instantaneous efficiency, would sure guarantee a total control of the production processes, through more detailed analysis than efficiency, of productivity and performance.
Metoda Automation has resolved this problem with DataView.
DataView is an analysis system and relative reportistica to the acquired data from database relational fed or our systems applications/expires or systems informed to us already present. To characterize and to recognize the problems before, and their causes, allow to realize timely participations of correction and prevention. In this way a better performance of the systems is determined and consequently, a better return of investment (ROI). Dataview for its tipologia and the diversification of the data of the database, is a software constructed ad hoc for the single customer and the relative necessities. The experience than more decennial in within automaton concurs industrial us to supply to the customer the reingegnerizzazione and the treatment of the data traffics, being thus produced an effective instrument for the detailed analysis of the production process.
Main functionalities of DataView
· immediate availability of the sensitive data;
· visualization and search of the data;
· elaboration of tables and diagrams;
· generation of trend and report, on the whose base to execute performance and productivity, efficiency analysis. |
|
With the new portable solution from KARL STORZ, you will be able to perform off line inspections. The results of the inspections can be converted into image and film format as well as documented.
The KARL STORZ PORTABLE PACK Set is consisting of:
Basis Unit, PAL
Battery
Battery Charger
Carrying Strap
Soft carrying bag
Compact-Flash Card 128MB
Card Reader |
|
Cygnus 3 - Datalogger
Multiple Echo Ultrasonic Thickness Gauge
The Cygnus 3 Datalogger is versatile and easy to program with simple menu operation. Templates provide solutions to recording various geometries such as tanks, cylinders, pipes and plant.
Single Point for linear Records
Multipoint for N-Readings per point Records
Grid Point for 2-Dimensional X-Y Records
Key Point for specifying ranges of readings with alarms for complex structures
Windows Explorer style menu with measurements logged with one simple key press. The unit interfaces with a PC using our dedicated software which is Windows® compatible. The Cygnus 3 gauge has storage for up to 200,000 measurements.
Features
• Can be carried on the waist belt for ease of climbing
• Highly water / dirt / dust resistant
• Rugged construction - shock proof
• Stable calibration - linear accuracy - no zero adjustment
• Self verification of the measurements to ensure accuracy
• Various probe options
• Echo strength displayed to aid measurement
• Dual display: Bright LED & graphical LCD displays
• Probe protected by a membrane against wear and tear
• Metric / Imperial switchable
Applications
• Metal thickness monitoring on cranes, marine structures and conveying systems
• Corrosion checks on ships’ shell plates, bulkheads and structures
• Metal thickness safety checks on steam and pressurised water systems,
• transportable gas containers and compressed air systems
• Systematic wall thickness and corrosion monitoring of storage tanks, process vessels and road tankers
For more information, please visit www.cygnus-instruments.com |
|
Here is the universal DAQ instrument that provides the extra added value for your demanding projects in test and measurement: QuantumX by HBM. Data acquisition at the highest level: small, fast, universal. Upgraded and exponentially enhanced to the power of "X" to give you fascinating, new opportunities: XXL flexibility. XXL efficiency. XXL reliability. Demand more for your measurement tasks. Demand QuantumX!
What do you want to measure today? Benefit from the universal connections QuantumX provides for almost all transducer technologies. QuantumX propels your test and measurement projects into the fast lane regardless of the combination of principles of measurement - just connect your transducers and start measuring... with 24-bit resolution!
QuantumX requires only minimal space for bundling technically superior functions. At only 174 x 44 x 119 mm (6.9 x 1.7 x 4.7 inch), QuantumX fits perfectly into every test bench - even where space is a constraint. The compact design considerably expands the range of applications you can cover - be it centralized or distributed data acquisition. |
|
|
|
see the results for the following category
