|
|
Powder Coating Ovens
Gruenberg's 96 cubic foot modular walk in oven offers many benefits to the paint, powder, and coatings industry. Our MPC45.96 powder coating oven features a bolted flange angle construction that allows for the back wall panel to be removed to add an additional 96 cubic foot module, doubling the production capacity.
Features include:
Cold rolled steel exterior
Lift hooks for easy location
Aluminized steel interior
Ceiling capable of supporting a hanger bar loaded with 250 lbs
Two circulation fans with a total of 1200 CFM
Circulation motors totally enclosed in control panel
Split double doors available to reduce floorspace requirements
18KW of heat input per heating module
Seamless, tubular heating elements
Controlled by solid state relays
Watlow high limit thermostat for safety
All necessary fusing to protect components
Single setpoint temperature controller
Digital process timer to shut heat off at end of timed cycle |
|
Pycnometer, Model 290
To measure the density of coating materials and similar liquids. Robust and light weight design, made of black anodized aluminium, or alternatively, stainless steel. Available for 50 or 100 ml capacity, also with official calibration certificate. |
|
APPLICATION Suitable for producing adhesive tape, such as:
BOPP tape/Double-side tape/Kraft paper tape/Label sticker/Foam tape/ Cloth tape/Polyester and Release paper.
FEATURES Special designs, suitable for various kinds of materials.
Auto tension control.
Auto temperature controlling to suit refresh materials.
Special designs for heating system, high efficiency.
According to different types to design different coating method.
MAIN TECHNICAL PARAMETERS:
MODEL AT-500 AT-1000 AT-1300 AT-1600
Valid width 500 mm 1000 mm 1300 mm 1600 mm
Mechanical Speed 5-30M/min 5-80M/min 15-150M/min 15-150M/min
Coating average degree ± 0.025mm
Rewinding Edge Smooth ± 3mm
Mechanical Power 5-25 HP 20-45 HP 30-80 HP 40-100 HP
Oven Length Special design is available according to customer’s request
Heating Steam/Hot Blast/Thermal Oil/Electricity |
|
Steel tube with solid brass sleeve cover
Inner tube: Steel
Outer tube: solid brass 63/37
Available also with different finishings: polished and clear-lacquered, chome-plated, nickel-plated, nickel-matt, browned, circular and lenghtwise brush
Diameters between 9 and 40mm
Material strenghts: 0,8mm
Lengths: up to 5000mm
Same premium surface as full brass tubes, but with a considerable price advantage |
|
Sewage pump with ceramic coating Ceram C0
Applied in airless procedure. For interior and exterior surfaces in contact with the pumped liquid resistand against salt water and industrial sewage. Layer thickness 400µm, adhesion 15 N/mm2, solvents free. |
|
HPA Conformal Coating
Ref: HPA
Resistant to mould growth
May be removed with solvents such as Ultrasolve (ULS)
UV trace for inspection
Excellent dielectric properties and with a wide temperature range
Approved to US MIL-1-46058C
China Military Approval GJB150 and GJB4 (Naval)
For professional use only
Acrylic Protective Lacquer
Ref: APL
Offers excellent adhesion to all substrates
UV trace for inspection
May be removed with solvents such as Ultrasolve (ULS)
Wide temperature range and good dielectric properties
May be soldered through, allowing for repair
For professional use only
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
GA-288 Pressure Gauge (0-160 PSI)
GA-313 Pressure Gauge (0-15 PSI)
GA-316 Pressure Gauge (0-160 PSI)
GA-333 Pressure Gauge (0-100 PSI)
GA-338 Pressure Gauge (0-160 PSI)
GA-73 Pressure Gauge (0-30 PSI)
GA-77 Pressure Gauge (0-30 PSI)
HAF-507-K12 WhirlWind In-Line Filter HAF
HAR-400 Air Regulator Lockout HAR
HARG-510 Air Control Regulator HARG
HAV-500 Air Adjusting Valve HAV
HAV-501 Air Adjusting Valve w/Gauge HAV
P-H-5516 Air Adjusting Valve
|
|
| ... products without technical information |
| |
| Unique design allows quick unclogging of spray tips without removing them from the spray gun. Plus, tungsten carbide orifice inserts ensure maximum erosion resistance. |
|
| These tubes are especially designed for the applications of painting, varnished and coating per pulverization. |
|
Differents types:
Direct Drive Agitator - Air Powered direct drive agitator assembly with 1/2 hp air motor and a three bade propeller to keep materials in suspension even with high solids.
Indirect Air Motor Drive - Standard duty, smooth running with gear reducer, 1/2hp, 15:1 ratio, 20 to 120 RPM. Inc throttling valve, fittings and hoses for connection to air supply on tank lid. Air consumption is approx 6CFM @ 50RPM.
Reciprocating Air Motor Drive - 180° reciprocating action provides excellent agitation of all types of materials. Particularly important for waterborne shear sensitive materials. Very low air consumption
|
|
In the delivery state (clamping ring barrel) the material is prepared and conditioned for use and transfer to the spray gun. Due to the pneumatic lid lifter, an empty barrel can be replaced easily with a full one. System components:
- Lid for attaching apparatus
- Pneumatic lid lifting device
- Agitator (electric or pneumatic powered)
- Pump with material filter
- Agitator switch off when lid is lifted pneumatically
- Compressed air fittings
All agitators are tested and certified in accordance with ATEX 94/9/EC. Versions without explosion protection are also available.
10 years of delivery guarantee for spare parts |
|
Were developed for high precision
flow metering for a wide variety of
liquids, especially liquids with high
abrasiveness and poor lubricity.
Applications include: chemical,
petrochemical, pharmaceutical and cosmetic
industry, two-component mixers,
paints, aviation.
Are dead spaced optimized for
(easy flushing) use in the paint industry
and for paint spraying systems. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
Short Wave Mobile Infrared Heaters
Models IRT 301 (3 kW), 302 (6 kW), 402 XLNC (12 kW), Crane 5400/42 XLNC
* Reduction of the polymerisation time
* Drying surface area varies according to the models: 0,9 m2 (9,7 ft2) 1,44 m2 (15,5 ft2) / 2,80 m2 (30,1 ft2)
* Pre-programmed baking cycles (according to the finishing products) / according to the model, detection and automatic setting of distance / positioning guided by laser beam
* Designed for drying of putties, weighting finish, lacquers and varnishes used in collision repairs
* This type of equipment can be configured with overhead gantry for integration in preparation bays |
|
ASP'S WASHABLE COVERS are made of industrial fabrics coated on one side only. This ensures that they can be successfully washed (in water or solvent) and thus used for a number of years. Satisfying your detailed requirements in full, our tailor-made design ensures maximum efficiency without restricting the robot's movements in any way. The covers can be changed (taken off and refitted) quickly, with no tooling required. This enables you to maintain high productivity. The covers we supply all meet the acceptation criteria for paint-shops in full (no silicon-type non-stick agents...).
|
|
| Pressure tanks made of galvanised steel or stainless steel are available in many sizes (1 litre - 250 litres). Due to uniform, pulsation-free material transfer from tank to gun, a first class spray pattern and a high working speed is achieved. If necessary, pressure tanks can be fitted with air-powered or electric agitators in order to achieve high hue accuracy and a homogeneous surface finish. WALTHER PILOT offers complete systems for all requirements. WALTHER PILOT manufactures pressure tanks in accordance with strict requirements of pressure equipment Directive 97/23/EC. In accordance with Directive 94/9/EC (ATEX), WALTHER PILOT has the approval for manufacturing equipment for appropriate application in areas exposed to explosion threats. Furthermore, we are certified to manufacture and approve tanks in accordance with the US-American ASME-code as well as the Chinese Safety Quality License. 10 years of delivery guarantee for spare parts. |
|
Advantages include:
Tube-based system eliminates costly resourcing and loss of speed
Single-element analysis - ideal for Lead (Pb) checks
Definitive Pos./Neg. Classifications
No isotope licensing or travel restrictions
Ergonomic, lightweight design
Versatile PDA platform.
Easily measures uneven surfaces |
|
|
