|
|
Product ISI36
Technical data - electrical ratings :
Accuracy 0...0.05 %
Approvals UL/cUL
CE conform
Backlit 24 VDC ±20 %, 50 mA
Control NPN
PNP
Floating contact
Counting frequency 7 kHz, 12 kHz, 30 Hz
Digit height 8 mm
Display LCD, 7-segment display
Display range 0...12000
Display refresh 1 s
Emitted interference DIN EN 61000-6-4
Function Tachometer
Frequence display
Input logic NPN / PNP coded by wire jumper
Interference immunity DIN EN 61000-6-2
Measuring principle Gate time measurement 1 s
Number of digits 8-digits
Power supply lithium battery (approx. 8 years at 20 °C)
Unit displayed 1/s
Other products available: |
|
Readouts series VD3 and VD4 display voltage, current, speed, angular or linear positionss and any physical or chemical measure which can be converted into an electrical signal.
All the different availble versions can read analogue or digital signals alike.
The indicators series VD4 avail on front parameter-entering keys and on two relay-outputs with threshold alarms on the displayed variable. |
|
FUTEK products include Sensors, Cables, Digital Displays, Signal Conditioners, Accessories, and Sensor Verification Systems just to name a few.
Once a particular Futek Transducer has been chosen for a given application, provisions must be made for appropriate excitation and for conditioning the output signal. The nature of the conditioning depends on the electrical characteristics of the transducer and the destination of the signal.
FUTEK related Signal Conditioners with Digital Displays are as follows:
1) IBT100 Bench Top Rotary Torque & Angle Digital Display
2) TEDS Capable IBT500 Bench Top Signal Conditioner with Digital Display
3) IHH300 Hand Held Portable Signal Conditioner with Digital Display
4) TEDS Capable IPM500 Panel Mount Signal Conditioner with Digital Display
5) IPM600 Color LCD Touch Panel Signal Conditioner with Digital Display
6) EXCLUSIVE TEDS Capable Verification Calibration (VCAL) System ONLY offered at FUTEK
|
|
Examples:
-JUMO di 308 Digital Indicator, microprocessor-controlled, with max. 2 inputs, wide range of expansion options, panel-mounting DIN housing, bezel 96mm x 48mm (70.1550)
Configurable process display text (max. 24-character running text)
Alarm signal text with color changeover green-red (also as running text)
Up to two configurable analog inputs
Three option slots
Math and logic module (option)
4 limit comparators
Fast and convenient configuration through setup program
RS422/485 interface (option)
PROFIBUS-DP interface (option)
cUL/UL approval applied for
-JUMO di48 indicating instrument, programmable via PC Setup with voltage output 24V DC / 45mA, bezel size 96 x 48mm (70.1520/95.1520)
configuration from PC through setup program
electrically isolated measurement input (setup is not isolated from the measurement input)
many different inputs possible: resistance thermometer in 2-/3-/4-wire circuit, thermocouple, resistance transmitter, standard signals, potentiometer in 2-/3-/4-wire circuit
internal cold junction
customised linearisation
offset correction
input filter for interference suppression
24 V supply for 2-wire transmitter
|
|
New PAX Lite Model with Relay Outputs : PAXLA
The first in a new series of PAX Lite panel meters has just been released. The new PAXLA can accept DC current, DC voltage, or process input signals, and scale them to a desired readout. This new model also has two form "C" relays capable of switching up to 5 amps, providing complete dual setpoint output control capability!
Flexibility has been built-in to the power supply as well. The newly designed universal power supply accepts 50 to 250 VAC or 21.6 to 250 VDC and provides 24 VDC output for sensor power.
Combining dual setpoint capability, the universal signal input and power requirements, and a low PAX Lite price, the new PAXLA offers exceptional value in a panel meter!
- 5 Digit, 0.56" High Red LED Display
- Programmable Scaling and Decimal Points
- Programmable User Input
- Dual 5 AMP Form C Relay
- Universally Powered
- NEMA 4X/IP65 Sealed Front Bezel
- Optional Custom Unit Overlay with Backlight
- Minimum and Maximum Display Capture |
|
The DMP200 series consists of four universal input indicators offering unparalleled price and performance. The use of surface mount components and modern microprocessor technology has enabled powerful features to be packed into a standard 1/8 DIN case.
The DML300 series of digital panel indicators is designed specifically for use with LVDT transducers. The "Fast-Cal" feature provides a fast and simple means of calibrating an indicator to the transducer at any two stroke positions. |
|
| Electronic indicators for pressure, flow, volume, temperature and level measurement. To program the device a password must be entered. Data are displayed on a 4-digit dispaly; easy setting by using the front panel keys. Some models are available with automatic programming of the sequence of operations. It is possible to programm up to 4 alarms, fix the beginning angìd the full scale values, set the engineering units, the decimal points and the peak value. Bargraph indicators and low-cost series available. |
|
DP510
Miniature instrument.
Front dimensions 24 x 48 mm.
Separate zero and span adjustments.
Current or voltage input.
Supply voltage 9-35 VAC/DC
DP520: dimensions 24 x 96 mm, 13 mm digit height
DP530: dimensions 48 x 48 mm, 10 mm digit height
DP531: dimensions 48 x 96 mm, 13 mm digit height
DP542: dimensions 48 x 96 mm, 20 mm digit height
Universal current and voltage inputs, red or green
LED display.
Supply voltage:: 9-35 VDC / 9-26 VAC |
|
Programmable panel meter for process, temperature and load cells.
Size: 96x48x60 mm.
Tricolor display: ±19999 (4 ½ digits)
|
|
The GDU is a digital indicator with configurable entrance and an exit of configurable alarm. It can be used to indicate diverse greatnesses like, for example: RPM, To, V, Hertz... Owns configurable from 0 to 1999 and entered rank of type: 0 à 10V, 0 à 5V and 4 à 20mA. It owns an exit of relay that can be used like alarm of minim, principle, inside and outside band. The access to programming of the parameters is protected by password.
Dimensions: 48x96x95mm;
Approximate weight: 360g;
Feeding: 110/220Vca (50-60hz), 24Vca/Vcc, 12Vca/Vcc;
Exit to relay: 5A. |
|
PRODIS-ADC: Digital Process Meter from ASM
The PRODIS® product family consists of digital process meters with a 6-digit LED display, developed and produced by ASM, a leading manufacturer of linear and rotary position sensors. PRODIS-ADC is a process meter designed especially for sensors with an analog output.
PRODIS-ADC is designed for use with analog position sensors to display angular and linear displacements. A high resolution A/D converter processes the signals from sensors with a voltage output 0…10 V, current output 0/4…20 mA or voltage divider output.
The meter is programmable to display values within preset start/end range or values in units as inches, mm or degrees. A tare function or programming lock can be activated with two control terminals.
The sensor excitation is supplied from the meter. With four membrane keys, all parameters can be programmed for signal evaluation, scaling and output function. Optional comparator functions are available with 4 NPN open-collector outputs and 2 NO/NC relay outputs.
|
|
The ATE300 is a multichannel indicator specially dedicated to flush-mounting (or wall-mounting) installations.
• Alternating display of 1 to 3 parameters
• 3 analogue inputs : 3 x 4-20mA or 3 x 0-10V
• 1 RS 232 digital input for KIMO external transmitter (class 200 & 300)
• 1 RS 485 digital input/output (Modbus protocol integrated)
• 22 pre-set units and 3 configurable units
• Configuration via software or remote control
• Electroluminescent front display, made of brushed stainless steel or white
lacquered
|
|
2 products to suit all your need in remote displaying : ATT 300 and ATE 300.
• ATT300 : can work with any current or voltage input of any transmitter : pressure, humidity, temperature, air flow, air velocity...
Display : -9999 to 99999
Display of the reading : 5 matrix digits
Display of units : 4 digits
Power supply : 24 Vac/Vdc
Analog inputs : 3 x 4-20mA, or 3 x 0-10V, or RS232 + one current or voltage input.
Housing : Stainless steel, IP65
Output : RS232
Modbus system (RS485 network)
•ATE 300 : can display 3 parameters (for example humidity, temperature and pressure). Can be installed flush-mounted or wall-mounted.
Display : -999 to 9999
Display of the reading : 4digits/7segments
Display of units :4 digits/14segments
Power supply : 24 Vac/Vdc
Analog inputs : 3 x 4-20mA, or 3 x 0-10V, or RS232 + one current or voltage input.
Housing : IP65
Output : RS232
Modbus system (RS485 network) |
|
Features:
Simple low cost indicator with front dimensions 48x24 mm
and LED size 8 mm
Power supply 10 ... 30 VDC
Analogue inputs 0-10V, 0-20 mA and 4-20 mA
Display range -19 999 to 99 999, adjustable zero and full scale value,
14 bits of resolution
Latch input to freeze the display, minimum/ maximum record memory
Easy to set up by only two front keys and menu support
Delivery includes adapter frame for 50x25 mm cut out and
label set with dimensions |
|
Digital display unit (DA 10), also available with additional relay output
(DA 12/14), for electronic transducers.
Display
5-digit graphic LCD display, backlit
(white), text-based user interface,
user interface language selectable
(German/English/French), selectable
units of measurement.
Measuring range
±99.999 digits (min. and max. fully adjustable) |
|
As well as the standard functions - preset, alarms, RS232 output, Max, Min, Difference, etc - Solartron digital readouts and dual digital displays boast a number of new functions.
For example, the new "Scaling Factor" function can be used to compensate for angled or lever operated probes, or diameter when measured in a V block. It also enables measurement of angles or squares.
Other new functions include the "Gauging Mode" - allowing global pass/fail evaluation of up to 30 scan channels -and "Max A Max B".
Ergonomically designed for the operator, the DR700 can be used with multiple probe fixtures using either Linear Encoders, Digital Probes or a combination of both - making it a truly versatile addition to the Solartron "Orbit" range.
|
|
A comprehensive range of high accuracy multi function digital metering systems offering measurement, display and communication of over 100 parameters, including true RMS measurement for total harmonic distortion and power quality data. Integra products are fully programmable via a simple menu driven interface and can be integrated into energy management systems via various communication protocols. To suit requirements, Integra offers pulsed, analogue and digital output options, and a choice of DIN, ANSI and JIS case styles, with high quality LED or LCD display.
|
|
PAX Series : Large range of Intelligent panel meters
The PAX Meter is the workhorse of our panel meter line-up. From its sunlight readable display to the wide variety of field-installable options cards, the PAX Meter will easily handle your application requirements. Select from the widest range of inputs in the industry, including models for both digital and analog signals. Their Comms capability allows data collection at various points of the machine and communicates the information to your management system, while still providing the machine operator with a localized display. Installing a complete system? Learn how to put a PAX Meter to work for you.
PAXC - Counter
PAXCK - Timer & Real Time Clock
PAXD - DC Volt & Current Input
PAXDP - Dual Process Input Meter
PAXH - AC True RMS Voltage and Current Meter
PAXI - Counter Rate Meter
PAXP - Process Input Meter
PAXR - Rate Meter
PAXS - Strain Gage Input
PAXT - Thermocouple & RTD Panel Meter
PAXTM - Preset Timer
Display of 5 LED digits of 14mm, with variable intensity for good outdoor readability (factor 1 to 15)
These intelligent solutions can be enabled with optional plug-in cards, for set point alarms (2 or 4),analog output and communications (RS232, RS485, Modbus, Devinet, Profibus), enabled Ethernet via external module (ICM8) |
|
LDSS - LARGE DIGITAL DISPLAY FOR SERIAL INPUTS
Ideal for Production line Monitoring, Temperature Zones Monitoring on the Plant Floor, Tank level Monitoring, Operation Timing, Storage/Process Temperature Monitoring...etc...,
The LDSS is the perfect solution to display a value that is currently stored in a register and displaying it on the plant floor.It is capable of accepting RS232 or RS485 as the input and displaying it as a remote or slave display.
- Exist in 2 versions, with display heights of 2.25" readable to 130' or the 4" readable to 180'.
- Input: accepts serial ASCII data from an host device
- Selectable for RS485 or RS232 serial interface
- Display capability: full numeric, limited alphabetical (missing M,W & X)
- Decimal point transmetted with the value
- Display selections: secondary display capability, Display scroll option
Supply a complete monitoring solution in combination with the Data Station Plus, the Modular Controller or one model of the G3 series |
|
As well as the standard functions - preset, alarms, RS232 output, Max, Min, Difference, etc - Solartron digital readouts and dual digital displays boast a number of new functions.
For example, the new "Scaling Factor" function can be used to compensate for angled or lever operated probes, or diameter when measured in a V block. It also enables measurement of angles or squares.
Other new functions include the "Gauging Mode" - allowing global pass/fail evaluation of up to 30 scan channels -and "Max A +Max B".
Ergonomically designed for the operator, the DR700 can be used with multiple probe fixtures using either Linear Encoders, Digital Probes or a combination of both - making it a truly versatile addition to the Solartron "Orbit" range.
|
|
Intrinsically safe analogue indicators - GSI / BSI series
Located in EX area
Field mounting (IP66) or panel mounting
3 1/2 and 4 1/2 digits display or bargraph
4-20 mA loop powered
Front face programming
Agreement : ATEX II 1G
Options : alarms, backlight, internal calibrator, set point station |
|
| The VM500 vibration monitor offers incredible versatility and functionality in a small 1/8 DIN package, for an attractive price. It provides fully scalable 4-20 mA output for your control system, and also includes two form C relays for a variety of uses. The VM500 is available in dis-placement, velocity, acceleration and even temperature models for 10, 100, and 500 mV/g accelerometers and "J" type thermocouples. Options include RMS or Peak display, as well as a wide range of high pass and low pass filters to focus on frequencies of interest. |
|
ESA Text Terminals are designed
for applications that require an
interface that is easy to use and
program. All of the function keys,
including the 18 supplementary
keys of the VT160W, can be used to
give direct commands like Start and
Stop to the machine.
Main characteristics (model
dependant):
- Alarms, passwords, recipes
- Mathematical functions
- Two drivers run simultaneously
- Serial or parallel printing
- Integrated Profibus-DP and CAN |
|
| When your application calls for variable indication, Digital Panel Meters (DPM) are the right tool. Voltage, current, pressure, volume, temperature, frequency and other parameters can be monitored and displayed. With a variety of input and ouput options, DPMs can be used in most any application and the product's short depth makes it flexible and accommodating to panelbuilders' needs. |
|
- Input Supply 4-20mA
- Up to 5 Digits of Display Range
- Sensor Drift Compensation at 0%
- Universal AC Supply Voltage |
|
* The panel meters PU5 are multi-purpose. The standard panels have an accuracy of 24 Bit, a measuring
rate of 50 measurements/sec, a MIN/MAX store, 30 points linearisation and an optical switching
point display. The units optional can be fit out with 4 independent scalable switching points, an analogue
output and a serial interface. They have 5 digits and are available in the assembly dimension
96x48. Power supply for active torque transducer happens with an external device. |
|
|
|
