|
|
The concept of the DSA100 encompasses everything from fully manual to fully automated contact angle measurement. Due to its modular concept, virtually any level of automation can be achieved - even with post-sales additions.
Flexible sample size, flexible measuring technique - with its double modularity concept KRÜSS GmbH has revolutionized contact angle measuring technology. No matter what measuring problem you have to face - the DSA100 will grow to meet your requirements. A total of more than 30000 different combinations is available from the DSA100 building block system; any necessary or required degree of automation can be realized in next to no time. |
|
EasyDrop Standard for PC operation and EasyDrop USB for working with a notebook: with these two instruments in the new KRÜSS product range measuring contact angles and surface free energy is as quick and simple as rarely before. The duo offers everything required for both routine lab work and on-site measurements. Quality managers gain quick access to reliable results. Scientists use the sophisticated analytical tools for research at a high level. The chiefly manual components ensure that EasyDrop remains favorably priced despite its high performance level.
- Contact angles easy and fast
- Fast and precise dosing and sample positioning
- Budget-friendly thanks to manual operation
- Several drop shape analysis methods for big and small angles
- Surface energy by all established methods
- Surface tension with the pendant drop method
- Comfortable evaluation and data management
|
|
BS33 can quickly measure length of any reeled wire up to 30,000m (100,000ft) and with the gauges from 0.15mm² to 240mm². Within seconds, cables up to 30,000m can be measured and digitally displayed without the cumbersome unrolling of cable reels. The BS33 also can be used as a precision milliohm meter.
In User Select mode, BS33 allows users to save the resistance of a used wire for additional measurements of unknown lengths of any wires with the same gauge. In normal mode, BS33 enables to accurately measure the length of standard gauge wire. With gauges selection from 0.15mm² to 240mm²; users can measure the length of any metal wire as well as Copper or Aluminum wires, the resistance of which can be measured precisely.
BS33 is very useful for electrical contractors, utilities and distributors to control inventories of wire.
Features:
- 4 digit display with enunciators
- Measures in FEET (ft) or METERS (m)
- Direct readout for both COPPER (Cu) or ALUMINUM (Al) wire
- User Select Mode with 8 memory locations
- Resistance range for milliohm measurements
- Automatic temperature compensation for changes in ambient temperature
- User calibration mode, Calibration standard included
- Sleep mode
- Easy-to-use
- Low battery indicator
- High precision Kelvin Clip test lead set included |
|
Microprocessor meltingpoint measuring instrument with interface RS-232.
Measuring Range: 25-400 °C
Accuracy: up to 200°C +/- 0.3°C; 200°C-400°C +/- 0.5°C
Display: LCD Grafik Display
Heating Rates: to 300°C approx. 4min; to 400°C approx.7.5 min
Dimensions: 230x210x110 |
|
Multifunction meters from AHLBORN are suitable for the adaption of various sensors and are able to measure and store the data of nearly all physivcal, chemical and electrical variables. Also sensors with a non linear output signal are adaptable. Sensor specific linearisations can be programmed easily by the user. The linearisation will be stored inside the intelligent sensor connector. Between 5 to 9 sensors are adaptable depending on instrument version. The devices are easy programmable via menue guided displays. The indication of up to 3 measuring values is possible on the large, illuminated display. The indication can be also a grafic or a measurement list. The measurement values can be stored in the device or directly be transfered to a PC, either per cable or wireless. Complete software programms are available for professional data acquisition. The company AHLBORN offers with its flexible dataloggers and multifunction devices many possibilities for each kind of application and measurement task. The ALMEMO measurement techology is future orientated and easy to handle.
|
|
°C, %RH, °Ctd, g/kg, hPa, m/s, m3/h, ppm CO, ppm CO2, U/min, mA, V
•Simultaneous measurement at several measurement locations
•Data logger function
•Freely usable probe inputs
•1 to over 200 measurement channels
•Data transfer with the Testo data bus
•Modular setup of system components |
|
m3/h, m/s, CO2, %RH, °C, DP, Lux
•Instrument memory for up to 10,000 measurement values
•PC software for analyzing, archiving and documenting the measurement data
•IAQ probe, Lux probe and Comfort Probe
•Vane measurement and integrated differential pressure probe for Pitot tube measurement
•Wireless probes for temperature and humidity |
|
Combining the two tools frequently used by every instrumentation technician,the ecom 789 Process Meter will be at home in every instrumentation technician ’s toolbox.The ecom Process Meter combine a DMM and a Loop Calibrator in one rugged,handheld tool. With its built-in 24 V loop supply it reduces the need for taking a separate power supply when doing off-line transmitter testing.
|
|
The new CAMSIZER generation is a compact laboratory instrument for simultaneous measurement of particle size distribution and particle shape. Using the measuring principle of digital image processing, two specially rated digital cameras measure pourable solids in the range from 30 µm to 30 mm. The unique scanning of all particles with the new advanced software means that for the first time it is possible to obtain screening results directly without any additional adaptation procedures. This makes CAMSIZER the ideal time- and cost-saving alternative for incoming and outgoing controls and for in-process quality control.
The AutoSampler - option for the CAMSIZER allows a high sample throughput in automatic operation mode.
Product Advantages:
- NEW: improved comparability to sieve analysis , also for multimodal distributions
- NEW: optimized, intuitive software
- NEW: additional shape parameters (e.g. surface analysis)
- NEW: several language versions (German, English and other languages)
- Results are saved in more than 1,000 size classes
- Simultaneous analysis of particle size, shape, number and density
- Greatest possible accuracy and reproducibility
- No-contact, non-destructive measurement
- Very short measuring time (2-3 min.)
|
|
Multinorm Combined Indoor Air Quality and sound analyser
Universal all-in-one instrument for measurement of air temperature, air velocity, relative humidity, illuminance, luminance and Class 1 (Pro Set) or Class 2 (Euro Set and Standard Set) sound analysis.
• Measurement functions: air temperature, air velocity/multipoint/mass flow calculations, relative humidity/dew point, illuminance and sound level meter and analyser. Completely digitalized Class 1 (Pro Set) or Class 2 (Euro Set and Standard Set) sound level meter with two independent measuring channels compliant with IEC 61672 standard. Each channel can be set with different time and frequency weighting. Multinorm is also a real-time octave and one third octave frequency analyser compliant with IEC 61260 standard.
• Operates in two modes: in an on-line reading mode which displays current measurements and in a logger mode, which automatically stores all measurement values per logging interval.
• Dimensions (w x h x l): 220 x 115 x 90 mm.
• Mass (without accessories): 0.70 kg.
|
|
Optical metrology equipment for climatologists and meteorologists
The laser ceilometer from JENOPTIK Laser, Optik, Systeme GmbH measures such atmospheric parameters as cloud height, visibility and the height of a planetary boundary layer. The product provides the first ever metrological device to safely detect also cloud layers and cirrus clouds at height levels up to 15 kilometers. This marks a major progress in the science of meteorological and climatologic forecasting. Measurement is accomplished with an opto-electronic laser sensor that relies on the LIDAR principle, an optical version of radar: A solid-state laser emits light pulses into the atmosphere. The light which is scattered by air and aerosol molecules is collected with a specific optical setup to be detected by a highly sensitive photo receiver (APD). By analyzing the pulse transit time and the intensity of backscattered light portions, smart algorithms compute a high-resolution aerosol height profile along with other related measurement readings. With integrated heating and cooling functionality and designed for autonomous operation, the CHM 15k can be relied to perform in any weather conditions.
|
|
| There are two methods for the safe installation of flowmeters in hazardous areas. Either the electronics must be housed in heavy flame-proof enclosure with expensive armoured cable connections (Eexd/Flameproof) or the electronics can be intrinsically safe (IS). The preferable approach is that the flowmeter is intrinsically safe and is not capable of igniting volatile gases. A normal low-cost, non-armoured cable is used to connect the flow-meter to the safe environment where isolator barrier devices are installed. These devices limit the energy passing to the IS transmitter electronics. |
|
The Zetasizer® Nano simplifies measurement of particle size, stability characterization using zeta potential, and molecular weight, for a wide range of dispersions, emulsions and molecules in solution. The technology in the system provides the sensitivity required for the measurement of proteins and polymers, as well as the ability to measure inks, pigments and emulsions at high concentrations. It is the method of choice for nano-particle applications from routine colloid size measurements to the investigation of particulates at the leading edge of materials research. Patented technologies ensure optimum performance for particle size measurement over the range 0.6 to 6000 nm, molecular weight measurement from 1 x 103 to 2 x 107 Daltons, and zeta potential of particles from 5 to 10 µm.
A unique disposable capillary cell for zeta potential measurement eliminates cross contamination; a wide range of cuvettes is available for different applications. The %u2018chromatography flow-mode%u2019 option allows the system%u2019s use as an in-line chromatography detector for protein applications, conferring the ability to perform Absolute Size Exclusion Chromatography (ASEC).
The optional MPT-2 autotitrator simplifies trend measurements and enables the measurement of size and zeta potential as a function of pH, conductivity or additive. Software includes solutions for 21CFR Part 11 compliance, customised reports, data export and an expert system approach for result quality assessment.
|
|
Analytical Imaging - Morphologi® G3, Sysmex FPIA-3000, SyNIRgi™
Particle shape and chemical composition image analyzers
Morphologi® G3 is an advanced particle characterization system for size and shape analysis. With a fully automated, dry sample dispersion device, and sophisticated data analysis software, it delivers reproducible, statistically significant data, with minimal manual intervention. Capturing microscope quality images of hundreds of thousands of particles in just a few minutes, Morphologi® G3 measures 20 different size and shape parameters.
Sysmex FPIA-3000 is a flow cytometry-based system using image analysis for the fully automated characterization of the shape and size of particles suspended in liquid media. Using a CCD camera and strobe illumination, it produces images of each suspended particle. With a choice of configurations, it measures particles from 0.8 - 300 µm using as little as 1 ml of sample.
The SyNIRgi™ near infrared chemical imaging (NIR-CI) system provides analysis of the nature and spatial location of chemical components within a sample. It combines the species identification capabilities of conventional near IR spectroscopy with digital imaging and is ideal for non-destructive routine analysis of samples with spatially complex arrangements of chemical species. Chemical imaging's application to solid dosage forms, allows determination of content uniformity, blending efficiency, polymorph distribution, moisture content, contaminant location, non-destructive coating thickness, and high-speed counterfeit detection.
Select Morphologi G3, Sysmex FPIA-3000 or SyNIRgi from the link. |
|
In some critical bolting applications, factors such as friction or bolt/joint geometry are such that the measurement of applied torque alone will not provide the degree of accuracy necessary to control the preload within the required limits. Likewise, many critical applications also demand that bolt preload be monitored over the service life of the fastener as part of a predictive or preventative maintenance program. In these applications, ultrasonic measurement of fastener elongation and/or load has frequently proven to be the most accurate, reliable and cost effective solution.
Ultrasonic measurement of bolt preload is made possible by introducing a sonic pulse at one end of the fastener and accurately measuring the time of flight (TOF) required for the echo to return from the opposite end; using material constants, the USM-II converts this TOF into an "ultrasonic length" of the fastener, providing a baseline from which future measurements will be made. When the fastener is tightened, the TOF increases and the USM-II will again utilize material constants to eliminate the effects of stress and temperature variations on sound velocity, providing an accurate elongation or load measurement.
The USM-II uses state of the art hardware and software to achieve these measurements with maximum automation, and minimizes the need for operator interpretation. Offering digital recordation and transmission of data, as well as calibrated analog signal output the USM-II provides a complete system for measurement, recordation, and control of fastener tension in the most demanding applications. |
|
Applications
: In-line density measurement of liquids or multiphase-mixtures
Special features:
Reliability
Robust construction with magnetic transmission of measured values.
Can be used in hazardous areas.
No by-pass required
Wide and clear scale
|
|
MR 44 non-contact measuring principle:
Length measuring device based on non-contact principle for production monitoring in fully automatic, unsupervised production. The probe temperature is kept constant.
MR 33 measuring principle scanning function:
Tactile length measuring device for production monitoring in fully automatic, unsupervised production. Direct contact probe with high quality potentiometer (12 mm stroke). |
|
Intrinsically Safe Laser Tachometer Ex-Tacho 10
Intrinsically Safe Magnet Probe Magnet-Ex 12
Intrinsically Safe Continuity Tester Ex-DT 12
Intrinsically Safe (Radio Time Signal Controlled) Wall Clocks Ex-Times 40/50 (35) |
|
| The Series 4000 Capacitec® amplifiers and racks were designed to offer the best signal to noise ratio and wide band width response options in a simple modular package. The 4000 Series was built upon our 20 year proven foundation of 3000 Series amplifiers (3101-SP, 3200, 3201-SP) still in operation. Utilization of individual pins in a 32 pin DIN connector increases reliability for more industrial applications where vibrations are present. The small Euro-style 2U size boards have appeal for small portable packaging as well as high (but lightweight) density applications. When coupled with Capacitec® non-contact displacement probes, they produce a linear output voltage proportional to the gap spacing between the probe and a ground plane. The systems are designed to produce stable and reliable operation with excellent gain and zero shift stability with respect to changes in ambient temperature. Stability is achieved with a digitally derived sine-wave oscillator, having a crystal clock as the frequency reference. |
|
Laser Hologage LGH (resolution 0.01 um):
- High-accuracy type with high displacement accuracy (0.1 um), high repeatability (0.02 um), and a length measuring range of 10 mm
- Optimal as a master gage of measuring instruments.
- For detailed information, leaflet is available on request.
Linear Gage LGB2 (slim type, resolution 0.1 um):
- Optimal for incorporation in equipment owing to a slim head type.
- Resolution: 0.1 um, accuracy: 0.8 um, measuring range: 5 mm
- For detailed information, leaflet is available on request.
Linear Gage LGF (resolution 0.1 um):
- A new model with a resolution of 0.1 um added to the lineup in the LGF series.
- A drastic cost reduction has achieved compared with the conventional type. Measuring range: 10 mm, 25 mm depending on the type
- For detailed information, leaflet is available on request. |
|
Heavy duty measuring unit, dual measuring wheels for better stability and contact, frame/bulkhead mounted.
This rugged instrument has a wide range of applications where an accurate record of length is required. It is a strong, heavy duty unit for use on calenders, tenters, rolling, ribbon winding textile machinery and almost all other continuous manufacturing processes. The unit can incorporate any of the heavy duty mechanical revolution counters described in the totalising and predetermining sections of this site.
• Available with shaft encoder for driving electronic counters or computers.
• Sturdy die-cast construction.
• Uses standard measuring wheels.
• Can tilted out of the way when not in use.
• Supplied with stand as an option.
The 2300 bolts directly onto a bulkhead or frame member. The intregal hinge arrangement allows the unit to be positioned at any angle.
The measuring wheels supplied can be 0.5m or 0.3m (18in or 12in) circumference (specify when
ordering). The weight of the assembly holds it in contact with the material being measured. |
|
KOFLOC MFC-Gas Mixer (8500)
The KOFLOC MFC-Gas Mixer (8500) integrates 3 KOFLOC Gas Mass Flow Controller MODEL 8500 SERIES and a gas mixer in one convenient package. The result is a compact device that not only saves space and avoids clattering, but a unit with superior performance than a conventional system of separate mass flow controllers, a gas mixer and piping. The KOFLOC MFC-Gas Mixer (8500) is especially suited for burn control applications by greatly reducing flame flickering and stabilizing burn better than conventional setup.
FEATURES
- High-lift actuator for large flows
- Single 24 VDC power source
- Choice of RS232C or RS485 interface
- Standard totalizer function
- 14-bit converter for 4-1/2-digit display and operation
- Isolated thermal sensor for measuring inflammable gases
- Choice of SUS316L or SUS316 stainless steel
- Standard dimensions and fittings for easy replacement
- Free mounting position
- SV setting, plus 5 pattern settings
- Auto-zero function
- Wide selection of fittings, seals, wetted materials and communication interfaces
- Easy maintenance
APPLICATIONS
♦ Gas mixing
♦ Burn control |
|
The new digital density meter DS7000 gets along with only 0,3 ml of sample quantity!
Additionally the density meter convinces with a measuring accuracy never seen before: in the measuring range of 0.00000 – 1.99999 g/cm³ the measuring accuracy is 0.00005 g/cm³. Whether you want to measure density, specific gravity or the concentration of liquid solutions: by this highly precise measuring instrument you receive results with 5 digits behind the comma. And even better: You receive your measuring result in only 1 second!
Behind these improvements stands a new-developed micromechanical measuring cell which needs only 80 µl of sample volume and provides an integrated temperature measurement of the sample.
Further features: built-in Peltier thermostat ensures precisely regulated temperature with a repeatability of +/- 0.02 °C, calibration certificate in accordance with N.I.S.T. density standard, particularly suitable for application fields in the GLP/GMP range, user-friendly touch-screen operates in 6 languages, interfaces RS232 and Ethernet, LIMS and printer connections.
990 programmable customized measuring methods (9 preset). The SQL data base thus stores and controls 999 results for you. Individual user management with separate passwords can be programmed.
The DS7000 can be used in a widespread range, e.g. for determination of mixing ratios, quality and quantity inspections. Operational fields are among others the chemical industry, pharmaceutical and cosmetics industry, breweries and beverage manufacturers, sugar and sweet material industry, pulp and paper industry, electronic industry, petrochemical industry and waste water management. |
|
Micromeritics new AccuPyc II 1340 Gas Displacement Pycnometry System are fast, fully automatic analyzers that provide high-speed, high-precision volume measurements and density calculations on a wide variety of materials. The AccuPyc completes most analyses in less than three minutes with excellent accuracy by using a gas displacement technique to determine absolute density of powders, solids, and slurries having volumes from 0.01 to 350 cm3.
The instrument can be operated with a keypad or an optional Windowsâ interface that provides exceptional reporting and archiving capability. Both versions include direct sample mass input from a balance and cycle-based displacement volume reporting. With the Windows interface, features such as time-based pressure equilibration reporting and additional calculations such as percent solids content and total pore volume are included.
For those who require high throughput, an integrated control and analysis module can control up to five additional external analysis modules. Each module can have a different size sample chamber (1 cm3, 10 cm3, 100 cm3, 350 cm3) providing even more versatility.
A multivolume option allows analysis of a variety of sample sizes in a single analysis module. A temperature-controlled version of the analysis module performs analyses at user-selectable temperatures.
|
|
| Thermo Scientific gas and liquid density meters measure density or density related variables within the oil and gas, petrochemical, chemical, food and beverage, and general process industries. These highly accurate, online, continuous meters use a proven vibrating element design to provide key information for process monitoring and control, quality control, product interface detection and custody transfer applications. With a twin tube design that is inherently more stable than single tube technology, the meters detect any variation of process constituents or final product quality in near real-time to improve productivity, minimize product waste and reduce costs when compared to sampling methods. The compact, lightweight meters are also easy to install without upstream flow conditioning or instrument supports. Once installed, the straight-through sensor offers an unobstructed flow path to ensure minimal pressure drop and higher flow rates. With hazardous area approvals and secondary containment on all models, these durable instruments withstand tough industrial environments to ensure a significant return on investment. |
|
The contactless and continuos measurement of the density of liquids or bulk material is requested in even more than the following applications:
Concentration measurement of aci | | |
